[sane-devel] Canon Pixma MX700 Sane backend

[Nicolas]

FYI, the Canon PIXMA MX700 (all-in-one) is now supported by the pixma
backend, for both flatbed and ADF scanning.

Thanks to Mike, owner of a PIXMA MX700, who contacted me and provided
the USB Snoops with the Windows driver, and then tested the changes
added to the pixma backend. 

Also enabled the 2 models PIXMA MX300 and MX310, as there's strong
chance they use the same protocol.

Upload to CVS done today, please report any issue.

Nicolas


-------- Message transféré --------
De: Michael Schmidt <MichaelMSchmidt@>
Répondre à: MichaelMSchmidt@
À: Nicolas <nicolas.martin at freesurf.fr>
Sujet: Re: Pixma MX700 Sane backend - Congratulations
Date: Sat, 15 Mar 2008 18:27:54 -0600

Nicolas,
I think everything is working now!  I changed the 3 lines in the "else" 
clause at about line 440, as you instructed in your last e-mail.  I then 
did the make distclean, make, moved and renamed the new libsane-pixma.so 
to the usr/lib/sane directory, did a reboot, and xsane was able to scan 
from the ADF!

I then did some logs using scanimage and have included the logs.  The 
first was scanimage -T (the scanimagetest.log).  I then did scanimage 
source="Automatic Document Feeder" with and without paper.  These logs 
are also included.  On the adf_no_paper.log, you will see an error at 
termination.  I think this is because I used 1/2 sheet of paper turned 
sideways.  I did this to keep the log from getting too big.

I've also included the modified pixma_mp150.c file.

So, unless you need any additional tests, I think we have finished the 
job!  There is a thread on the Ubuntu forum about getting the Pixma 
MX700 running.  I think either you or I should add a comment to this 
thread to let people know the scanner feature is working now.

mike