[sane-devel] AV122 vertical strips...can you assist?

[Wilhelm Meier]

Hi Rene,

I get a 404 for

http://svn.exactcode.de/sane-avision/trunk/backend

-- 

Am Dienstag 25 November 2008 schrieb Rene Rebe:
> IIRC CVS outputs 1.1.0 or so already.
>
> If you have not taken extra measures you might have two
> versions of SANE on your system, now and run the old one,
> see:
>
>    http://www.exactcode.de/site/open_source/saneavision/compiling/
>
> (And various other guides.)
>
> On 25.11.2008, at 13:44, Zudio Solutions wrote:
> > thanks Rene.
> >
> > Sorry to be a pain, but I'm learning here.
> >
> > I got the CVS, configure, make and install. Still getting the
> > strips. how do i know which version is running (CVS or 1.0.19 )
> > is that using scanimage --help ?
> >
> > any help would be appreciated.
> >
> > Cheers,
> > Gil
> >
> > On Tue, Nov 25, 2008 at 10:40 PM, Rene Rebe <rene at exactcode.de> 
wrote:
> >> Yeah - and you're still not using CVS ...
> >>
> >> AFAICS CVS is fine.
> >>
> >> On 25.11.2008, at 12:33, Zudio Solutions wrote:
> >>> Hi Rene, this is how images look like:
> >>>
> >>> http://picasaweb.google.com/zudiosol/Temp02#5272555966400660866
> >>>
> >>> on XP using TWAIN it's fine.
> >>>
> >>> ideas?
> >>>
> >>> vendor=0x0638 [AVISION ], product=0x0a33 [AV 122])
> >>> scanimage (sane-backends) 1.0.19; backend version 1.0.19
> >>> device `avision:libusb:004:005' is a Avision AV122 sheetfed
> >>> scanner Ubuntu 8.10
> >>>
> >>>
> >>> On Tue, Nov 25, 2008 at 10:02 PM, Rene Rebe <rene at exactcode.de>
> >>>
> >>> wrote:
> >>>> If there are just tiny, very light lines then there
> >>>> is probably dust on the CCD glass, you can wipe it
> >>>> clean with air or some clean soft towel.
> >>>>
> >>>> Jacques Verhagen wrote:
> >>>>> I have the same problem,
> >>>>>
> >>>>> It is not a Sane or Linux problem.
> >>>>> With XP as os I get the same results
> >>>>> I think it is a AV220 problem or the paper quality.
> >>>>>
> >>>>> Wilhelm Meier schreef:
> >>>>>> Am Freitag 21 November 2008 schrieb René Rebe:
> >>>>>>> m. allan noah wrote:
> >>>>>>>> the author of the avision backend seems to be missing, but
> >>>>>>>> you could try to email him directly.
> >>>>>>>>
> >>>>>>>> <rene at exactcode dot de>
> >>>>>>>
> >>>>>>> Missing? (Just busy at work I would name it :-)
> >>>>>>>
> >>>>>>> I also got another mail asking about the AV122 buttons
> >>>>>>
> >>>>>> yes, that was me ...
> >>>>>>
> >>>>>>> , as he did
> >>>>>>> not mention other problems I think CVS head should be fine.
> >>>>>>
> >>>>>> and CVS Head is fine with respect to scanning and image
> >>>>>> data!
> >>>>>>
> >>>>>>> Have
> >>>>>>> you tried CVS?
> >>>>>>>
> >>>>>>>> allan
> >>>>>>>>
> >>>>>>>> On Thu, Nov 20, 2008 at 6:09 AM, Zudio Solutions
> >>>>>>
> >>>>>> <zudiosol at gmail.com> wrote:
> >>>>>>>>> Hello to the community. I'm new to SANE and hope that you
> >>>>>>>>> can assist.
> >>>>>>>>>
> >>>>>>>>> I'm using AV122 Avision scanner and getting horrible
> >>>>>>>>> vertical strips no matter what options I'm using.
> >>>>>>>>> I'm on this environment:
> >>>>>>>>> (vendor=0x0638 [AVISION ], product=0x0a33 [AV 122])
> >>>>>>>>> scanimage (sane-backends) 1.0.19; backend version 1.0.19
> >>>>>>>>> device `avision:libusb:004:005' is a Avision AV122
> >>>>>>>>> sheetfed scanner Ubuntu 8.10
> >>>>>>>>>
> >>>>>>>>> From my readings in the archive the issue relates to
> >>>>>>>>> calibration. Trying 'quality calibration' ON and OFF
> >>>>>>>>> doesn't change a thing. Scanning in windows is fine, no
> >>>>>>>>> issues.
> >>>>>>>>>
> >>>>>>>>> Any ideas?
> >>>>>>>>> Thanks in advance.
> >>>>>>>>> GHOZ
> >>>>>>>>>
> >>>>>>>>> --
> >>>>>>>>> sane-devel mailing list:
> >>>>>>>>> sane-devel at lists.alioth.debian.org
> >>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-deve
> >>>>>>>>>l Unsubscribe: Send mail with subject "unsubscribe
> >>>>>>>>> your_password"
> >>>>>>>>>          to sane-devel-request at lists.alioth.debian.org
> >>>>>>>
> >>>>>>> --
> >>>>>>> René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
> >>>>>>> http://exactcode.de | http://t2-project.org |
> >>>>>>> http://rene.rebe.name
> >>>>
> >>>> --
> >>>> René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
> >>>> http://exactcode.de | http://t2-project.org |
> >>>> http://rene.rebe.name
> >>>>
> >>>> --
> >>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> >>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> >>>> Unsubscribe: Send mail with subject "unsubscribe
> >>>> your_password" to sane-devel-request at lists.alioth.debian.org
> >>
> >> --
> >> René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
> >> http://exactcode.de | http://t2-project.org |
> >> http://rene.rebe.name
>
> --
>    René Rebe - ExactCODE GmbH - Europe, Germany, Berlin
>    http://exactcode.de | http://t2-project.org |
> http://rene.rebe.name



-- 
Wilhelm