[sane-devel] Support CanonScan LiDE 200
James
bjlockie at lockie.ca
Thu Oct 9 20:24:50 UTC 2008
On Thu, October 9, 2008 3:51 pm, Jan Huijsmans wrote:
> Hello,
>
>
> Today I bought this scanner (dmesg and sane-find-device output included)
> and to my supprice even the chipset isn't mentioned as (un)supported, so I
> guess I have a new device...
>
> Is someone already working on the support of this device?
>
>
> [313022.590041] usb 3-2: new high speed USB device using ehci_hcd and
> address 3 [313022.725925] usb 3-2: configuration #1 chosen from 1 choice
> [313022.728155] usb 3-2: New USB device found, idVendor=04a9,
> idProduct=1905 [313022.728155] usb 3-2: New USB device strings: Mfr=1,
> Product=2, SerialNumber=0
> [313022.728155] usb 3-2: Product: CanoScan
> [313022.728155] usb 3-2: Manufacturer: Canon
> [313102.016944] usb 3-2: USB disconnect, address 3
> [313105.166988] usb 3-2: new high speed USB device using ehci_hcd and
> address 4 [313105.363834] usb 3-2: configuration #1 chosen from 1 choice
> [313105.366664] usb 3-2: New USB device found, idVendor=04a9,
> idProduct=1905 [313105.366682] usb 3-2: New USB device strings: Mfr=1,
> Product=2, SerialNumber=0
> [313105.366682] usb 3-2: Product: CanoScan
> [313105.366682] usb 3-2: Manufacturer: Canon
>
>
> <device descriptor of 0x04a9/0x1905 at 003:004>
> bLength 18 bDescriptorType 1 bcdUSB 2.00
> bDeviceClass 255 bDeviceSubClass 255 bDeviceProtocol
> 255
> bMaxPacketSize0 64 idVendor 0x04A9 idProduct
> 0x1905
> bcdDevice 6.03 iManufacturer 1 ((null)) iProduct
> 2 ((null))
> iSerialNumber 0 () bNumConfigurations 1 <configuration 0>
> bLength 9 bDescriptorType 2 wTotalLength 39
> bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 ()
> bmAttributes 160 (Remote Wakeup) MaxPower 500 mA
> <interface 0>
> <altsetting 0>
> bLength 9 bDescriptorType 4 bInterfaceNumber 0
> bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255
> bInterfaceSubClass 255 bInterfaceProtocol 255 iInterface 0 ()
> <endpoint 0>
> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms
> bRefresh 0 bSynchAddress 0 <endpoint 1>
> bLength 7 bDescriptorType 5 bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk) wMaxPacketSize 512 bInterval 0 ms
> bRefresh 0 bSynchAddress 0 <endpoint 2>
> bLength 7 bDescriptorType 5 bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt) wMaxPacketSize 1 bInterval 8 ms
> bRefresh 0 bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ... this is not a GT-6801 (bcdUSB = 0x200) checking
for
> GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 255, bInterfaceClass = 255) checking
> for GT-8911 ... this is not a GT-8911 (check 1, bDeviceClass = 255,
> bInterfaceClass = 255) checking for MA-1017 ... this is not a MA-1017
> (bDeviceClass = 255, bInterfaceClass = 255)
> checking for MA-1015 ... this is not a MA-1015 (bcdUSB = 0x200) checking
for
> MA-1509 ...
> this is not a MA-1509 (bcdUSB = 0x200) checking for LM983[1,2,3] ...
this is
> not a LM983x (bcdUSB = 0x200) checking for GL646 ... this is not a GL646
> (bDeviceClass = 255, bInterfaceClass = 255)
> checking for GL646_HP ... this is not a GL646_HP (bcdUSB = 0x200) checking
> for GL660+GL646 ... this is not a GL660+GL646 (bDeviceClass = 255,
> bInterfaceClass = 255) checking for GL84x ... Couldn't set configuration:
> could not set config 1: Operation not permitted <This USB chip looks like
> a GL843? (result from sane-backends 1.0.19)>
>
> found USB scanner (vendor=0x04a9, product=0x1905, chip=GL843?) at
> libusb:003:004
>
>
> <device descriptor of 0x1d6b/0x0002 at 003:001>
> bLength 18 bDescriptorType 1 bcdUSB 2.00
> bDeviceClass 9 bDeviceSubClass 0 bDeviceProtocol 0
> bMaxPacketSize0 64 idVendor 0x1D6B idProduct
> 0x0002
> bcdDevice 2.06 iManufacturer 3 ((null)) iProduct
> 2 ((null))
> iSerialNumber 1 ((null)) bNumConfigurations 1 <configuration 0>
> bLength 9 bDescriptorType 2 wTotalLength 25
> bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup) MaxPower
> 0 mA <interface 0>
> <altsetting 0>
> bLength 9 bDescriptorType 4 bInterfaceNumber 0
> bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9
> bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 () <endpoint
> 0>
> bLength 7 bDescriptorType 5 bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt) wMaxPacketSize 4 bInterval 12 ms
> bRefresh 0 bSynchAddress 0
"ScanJet 4890C USB 0x03f0/0x1b05 unsupported GL843, maybe can be added
to genesys backend".
It seems like that backend was abandoned so who knows.
More information about the sane-devel
mailing list