[sane-devel] weird xsane client problem over network. 2nd try.

[Jason Welsh]

where can I get the latest cvs code? I dont see any mention of it on the
webpage
http://www.xsane.org/xsane-download.html

Jason


m. allan noah wrote:
> sane also uses a data port range. previously this was not
> configurable. In the cvs version it now is, though the cvs version's
> man page still incorrectly has the 'Restrictions' section.
>
> allan
>
> On Sun, Apr 12, 2009 at 11:10 PM,  <jason at monsterjam.org> wrote:
>   
>> hey folks, I have saned up and running on a host on my network 192.168.1.118 and my client is running on 10.1.1.5
>> when I run xsane, I select the scanner on the remote box and click ok but the connection eventually times out.
>> Ive gone over the docs many times and dont see anything misconfigured.. so I started sniffing packets and I see this
>>
>> Capturing on eth0
>>  0.000000     10.1.1.5 -> 192.168.1.118 TCP 41396 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103708822 TSER=0 WS=6
>>  0.000000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41396 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>>  0.370000     10.1.1.5 -> 192.168.1.118 TCP 41397 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103708859 TSER=0 WS=6
>>  0.370000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41397 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>>  1.130000     10.1.1.5 -> 192.168.1.118 TCP 41398 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103708935 TSER=0 WS=6
>>  1.140000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41398 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>>  2.200000     10.1.1.5 -> 192.168.1.118 TCP 41399 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103709042 TSER=0 WS=6
>>  2.200000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41399 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>>  3.260000     10.1.1.5 -> 192.168.1.118 TCP 41400 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103709148 TSER=0 WS=6
>>  3.260000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41400 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>>  4.330000     10.1.1.5 -> 192.168.1.118 TCP 41401 > 54921 [SYN] Seq=0 Win=5840 Len=0 MSS=1460 TSV=103709255 TSER=0 WS=6
>>  4.330000 192.168.1.118 -> 10.1.1.5     TCP 54921 > 41401 [RST, ACK] Seq=1 Ack=1 Win=0 Len=0
>> ^C12 packets captured
>>
>> why is my client (xsane) trying to contact the saned server on these ports? shouldnt it be trying to hit it on tcp port 6566?
>> is that right?
>>
>> Jason
>>
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
>>
>>     
>
>
>
>