[sane-devel] Fujitsu Scansnap 1500, sane-find-scanner -v -v

m. allan noah kitno455 at gmail.com
Fri Apr 24 12:52:56 UTC 2009


And- after some private exchange, the machine does appear to work
correctly. I have updated the status in our system/website.

Thanks for your help guys.

allan

On Fri, Apr 17, 2009 at 2:48 PM, Raman Gupta <rocketraman at fastmail.fm> wrote:
> I am forwarding some information from Sam Glover of lawyerist.com.
>
> Sam has a Fujitsu Scansnap s1500 scanner, which he reviewed [1] and uses
> in his law practice.
>
> He has executed and attached the output of sane-find-scanner -v -v.
>
> Cheers,
> Raman Gupta
>
> [1] http://lawyerist.com/2009/03/29/review-scansnap-s1500-document-scanner/
>
> -------- Original Message --------
> Subject:        S1500
> Date:   Fri, 17 Apr 2009 10:29:37 -0500
> From:   Sam Glover <samglover at consumerlawyer.mn>
> To:     rocketraman at fastmail.fm
>
>
>
> Attached is the result of the commands you asked me to run.
>
> FYI, I am running Ubuntu 8.10.1 on a fairly new Dell Inspiron 530. I
> have XSane installed, but it does not recognize the S1500 when I try to
> start XSane. I use the S1500 in Windows XP running in VirtualBox,
> though, so it never occurred to me to check.
>
>
> ~$ cat /proc/bus/usb/devices
> cat: /proc/bus/usb/devices: No such file or directory
> ~$ sane-find-scanner -v -v
> This is sane-find-scanner from sane-backends 1.0.19
>
>  # sane-find-scanner will now attempt to detect your scanner. If the
>  # result is different from what you expected, first make sure your
>  # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Access to resource has been denied)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Access to resource has been denied)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
>  # No SCSI scanners found. If you expected something different, make sure that
>  # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x1d6b/0x0001 at 005:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1d.0)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0002 at 008:001 (Linux 2.6.27-11-generic ehci_hcd EHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0002
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic ehci_hcd)
> iProduct              2 (EHCI Host Controller)
> iSerialNumber         1 (0000:00:1d.7)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    4
>    bInterval         12 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 006:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1d.1)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 001:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1a.0)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 007:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1d.2)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x04c5/0x11a2 at 004:009>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x04C5
> idProduct             0x11A2
> bcdDevice             1.00
> iManufacturer         1 ((null))
> iProduct              2 ((null))
> iSerialNumber         0 ()
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         32
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         192 (Self-powered)
>  MaxPower             98 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      2
>   bInterfaceClass    255
>   bInterfaceSubClass 255
>   bInterfaceProtocol 255
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x02 (out 0x02)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <trying to find out which USB chip is used>
>    checking for GT-6801 ...
>    this is not a GT-6801 (bDeviceClass = 0)
>    checking for GT-6816 ...
>    this is not a GT-6816 (bcdUSB = 0x200)
>    checking for GT-8911 ...
>    this is not a GT-8911 (check 2, bcdUSB = 0x200)
>    checking for MA-1017 ...
>    this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for MA-1015 ...
>    this is not a MA-1015 (bDeviceClass = 0)
>    checking for MA-1509 ...
>    this is not a MA-1509 (bDeviceClass = 0)
>    checking for LM983[1,2,3] ...
>    this is not a LM983x (bcdUSB = 0x200)
>    checking for GL646 ...
>    this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL646_HP ...
>    this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL660+GL646 ...
>    this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for GL84x ...
>    this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>    checking for ICM532B ...
>    this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>    checking for PV8630/LM9830 ...
>    this is not a PV8630/LM9830 (bcdUSB = 0x200)
>    checking for M011 ...
>    this is not a M011 (bDeviceClass = 0)
>    checking for RTS8822 ...
>    this is not a RTS8822 (bNumEndpoints = 2)
>    checking for rts8858c ...
>    this is not a rts8858c (bcdUSB = 0x200)
>    checking for SQ113 ...
>    this is not a SQ113 (bNumEndpoints = 2)
>    checking for HP5550/5590/7650 chipset ...
>    this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>    checking for rts8801/rts8891 ...
>    this is not a rts8801/rts8891 (bcdUSB = 0x200)
> <Couldn't determine the type of the USB chip (result from sane-backends 1.0.19)>
>
> found USB scanner (vendor=0x04c5, product=0x11a2) at libusb:004:009
>
> <device descriptor of 0x0d49/0x7200 at 004:004>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x0D49
> idProduct             0x7200
> bcdDevice             3.03
> iManufacturer         1 ((null))
> iProduct              2 ((null))
> iSerialNumber         3 ((null))
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         32
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         192 (Self-powered)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      2
>   bInterfaceClass    8
>   bInterfaceSubClass 6
>   bInterfaceProtocol 80
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x01 (out 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>    <endpoint 1>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      2 (bulk)
>    wMaxPacketSize    512
>    bInterval         0 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0002 at 004:001 (Linux 2.6.27-11-generic ehci_hcd EHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0002
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic ehci_hcd)
> iProduct              2 (EHCI Host Controller)
> iSerialNumber         1 (0000:00:1a.7)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    4
>    bInterval         12 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x413c/0x2003 at 003:002 (Dell Dell USB Keyboard)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       8
> idVendor              0x413C
> idProduct             0x2003
> bcdDevice             3.06
> iManufacturer         1 (Dell)
> iProduct              2 (Dell USB Keyboard)
> iSerialNumber         0 ()
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         34
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         160 (Remote Wakeup)
>  MaxPower             70 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    3
>   bInterfaceSubClass 1
>   bInterfaceProtocol 1
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    8
>    bInterval         24 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1a.2)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x045e/0x00e1 at 002:004>
> bLength               18
> bDescriptorType       1
> bcdUSB                2.00
> bDeviceClass          0
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       8
> idVendor              0x045E
> idProduct             0x00E1
> bcdDevice             0.07
> iManufacturer         1 ((null))
> iProduct              2 ((null))
> iSerialNumber         0 ()
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         34
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         160 (Remote Wakeup)
>  MaxPower             100 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    3
>   bInterfaceSubClass 1
>   bInterfaceProtocol 2
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    6
>    bInterval         10 ms
>    bRefresh          0
>    bSynchAddress     0
>
> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.27-11-generic uhci_hcd UHCI Host Controller)>
> bLength               18
> bDescriptorType       1
> bcdUSB                1.10
> bDeviceClass          9
> bDeviceSubClass       0
> bDeviceProtocol       0
> bMaxPacketSize0       64
> idVendor              0x1D6B
> idProduct             0x0001
> bcdDevice             2.06
> iManufacturer         3 (Linux 2.6.27-11-generic uhci_hcd)
> iProduct              2 (UHCI Host Controller)
> iSerialNumber         1 (0000:00:1a.1)
> bNumConfigurations    1
>  <configuration 0>
>  bLength              9
>  bDescriptorType      2
>  wTotalLength         25
>  bNumInterfaces       1
>  bConfigurationValue  1
>  iConfiguration       0 ()
>  bmAttributes         224 (Self-poweredRemote Wakeup)
>  MaxPower             0 mA
>  <interface 0>
>   <altsetting 0>
>   bLength            9
>   bDescriptorType    4
>   bInterfaceNumber   0
>   bAlternateSetting  0
>   bNumEndpoints      1
>   bInterfaceClass    9
>   bInterfaceSubClass 0
>   bInterfaceProtocol 0
>   iInterface         0 ()
>    <endpoint 0>
>    bLength           7
>    bDescriptorType   5
>    bEndpointAddress  0x81 (in 0x01)
>    bmAttributes      3 (interrupt)
>    wMaxPacketSize    2
>    bInterval         255 ms
>    bRefresh          0
>    bSynchAddress     0
>  # Your USB scanner was (probably) detected. It may or may not be supported by
>  # SANE. Try scanimage -L and read the backend's manpage.
>
>  # Not checking for parallel port scanners.
>
>  # Most Scanners connected to the parallel port or other proprietary ports
>  # can't be detected by this program.
>
>  # You may want to run this program as root to find all devices. Once you
>  # found the scanner devices, be sure to adjust access permissions as
>  # necessary.
> done
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"



More information about the sane-devel mailing list