[sane-devel] Pixma MP600R times out after scan stats
Nicolas Martin
nicolas.martin at freesurf.fr
Sat Apr 25 08:46:39 UTC 2009
In order to facilitate investigations on this: do you successfully scan
with an usb cable ?
Nicolas
Le vendredi 24 avril 2009 à 23:30 +0200, Phil Wooding a écrit :
> Hi,
>
> I am trying to get the latest svn code working with a MP600R.
> The scanner is properly detected, it starts scanning, but then
> nothing...
> Any help would be apreciated as it should work according to the
> documentation.
>
> Thanks,
>
> Phil
>
> Here are the logs with maximum debug information:
>
> [pixma] bjnp_set_timeout(requested 10000, set 20000):
> [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088)
> [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short block
> = 0 blocksize = 0x400 = 1024
> [pixma] So far received 0x0 bytes = 0, need 0x8 = 8
> [pixma] No (more) scanner data available, requesting more
> [pixma] bjnp_send_read_req sending command
> [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0b 00 09 00 00 00 00
> [pixma] bjnp_recv_header: receiving response header
> [pixma] TCP response header(scanner data = 8 bytes):
> [pixma] 00000000:42 4a 4e 50 82 20 00 00 00 0b 00 09 00 00 00 08
> [pixma] Scanner reports 0x8 = 8 bytes available
> [pixma] reading 0x8 = 8 (of max 0x8 = 8) bytes more
> [pixma] bjnp_recv_data: receiving response data
> [pixma] bjnp_recv_data: read response payload (8 bytes max)
> [pixma] Received TCP response payload (8 bytes):
> [pixma] 00000000:06 06 00 00 00 00 00 00
> [pixma] IN T=6.235 len=8
> [pixma] 00000000:06 06 00 00 00 00 00 00
> [pixma]
> [pixma] bjnp_set_timeout(requested 10000, set 20000):
> [pixma] bjnp_write_bulk(0, bufferptr, 0x40 = 64)
> [pixma] bjnp_write: sending 0x40 = 64 bytes
> [pixma] 00000000:42 4a 4e 50 02 21 00 00 00 0c 00 09 00 00 00 40
> [pixma] 00000010:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30
> [pixma] 00000020:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00
> [pixma] 00000030:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00
> [pixma] 00000040:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5
> [pixma] bjnp_recv_header: receiving response header
> [pixma] TCP response header(scanner data = 4 bytes):
> [pixma] 00000000:42 4a 4e 50 82 21 00 00 00 0c 00 09 00 00 00 04
> [pixma] bjnp_recv_data: receiving response data
> [pixma] bjnp_recv_data: read response payload (4 bytes max)
> [pixma] Received TCP response payload (4 bytes):
> [pixma] 00000000:00 00 00 40
> [pixma] OUT T=6.240 len=64
> [pixma] 00000000:de 20 00 00 00 00 00 00 00 00 00 00 00 00 00 30
> [pixma] 00000010:00 00 00 00 80 4b 80 4b 00 00 00 00 00 00 00 00
> [pixma] 00000020:00 00 02 80 00 00 03 6d 08 18 00 00 00 00 00 00
> [pixma] 00000030:ff 00 00 81 00 00 02 01 00 00 00 00 00 00 00 d5
> [pixma]
> [pixma] bjnp_set_timeout(requested 10000, set 20000):
> [pixma] bjnp_read_bulk(0, bufferptr, 0x8 = -1075284088)
> [pixma] bjnp_read_bulk: 0x0 = 0 bytes available at start, Short block
> = 0 blocksize = 0x400 = 1024
> [pixma] So far received 0x0 bytes = 0, need 0x8 = 8
> [pixma] No (more) scanner data available, requesting more
> [pixma] bjnp_send_read_req sending command
> [pixma] 00000000:42 4a 4e 50 02 20 00 00 00 0d 00 09 00 00 00 00
> [pixma] bjnp_recv_header: receiving response header
> [pixma] bjnp_recv_header: could not read response header (select timed
> out): Success!
> [pixma] IN T=26.257 len=-9
> [pixma] ERROR: ETIMEDOUT
>
>
> ______________________________________________________________________
> What can you do with the new Windows Live? Find out
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
More information about the sane-devel
mailing list