[sane-devel] Success report for Plustek OpticSlim 2400 plus

Helmar Gerloni helmar at gerloni.net
Mon Apr 27 19:30:46 UTC 2009


Hello,

i just did the first scan with my new Plustek OpticSlim 2400+ on Debian Lenny 
(libsane 1.0.19-23) after the following modifications:

- Copy Firmware to /usr/share/sane/gt68xx/cis3R5B1.fw

- Add to /etc/sane.d/gt68xx.conf:
##############################################################################
# Autodetect Plustek OpticSlim 2400+
usb 0x07b3 0x0454
override "plustek-opticslim-2400"

- Add to /etc/udev/rules.d/z60_libsane.rules:
# Plustek OpticSlim 2400+
SYSFS{idVendor}=="07b3", SYSFS{idProduct}=="0454", MODE="0664", \
GROUP="scanner", ENV{libsane_matched}="yes"

- Add my user to the group "scanner"

Helmar.

------------------------------------------------------------------------------
# sane-find-scanner -v -v
...
<device descriptor of 0x07b3/0x0454 at 002:002 (1200dpi USB Scanner)>
bLength               18
bDescriptorType       1
bcdUSB                1.10
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       64
idVendor              0x07B3
idProduct             0x0454
bcdDevice             5.01
iManufacturer         0 ()
iProduct              1 (1200dpi USB Scanner)
iSerialNumber         0 ()
bNumConfigurations    1
 <configuration 0>
 bLength              9
 bDescriptorType      2
 wTotalLength         32
 bNumInterfaces       1
 bConfigurationValue  1
 iConfiguration       0 ()
 bmAttributes         160 (Remote Wakeup)
 MaxPower             500 mA
  <interface 0>
   <altsetting 0>
   bLength            9
   bDescriptorType    4
   bInterfaceNumber   0
   bAlternateSetting  0
   bNumEndpoints      2
   bInterfaceClass    255
   bInterfaceSubClass 255
   bInterfaceProtocol 255
   iInterface         0 ()
    <endpoint 0>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x81 (in 0x01)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0
    <endpoint 1>
    bLength           7
    bDescriptorType   5
    bEndpointAddress  0x02 (out 0x02)
    bmAttributes      2 (bulk)
    wMaxPacketSize    64
    bInterval         0 ms
    bRefresh          0
    bSynchAddress     0

<trying to find out which USB chip is used>
    checking for GT-6801 ...
    this is not a GT-6801 (bDeviceClass = 0)
    checking for GT-6816 ...
<This USB chip looks like a GT-6816 (result from sane-backends 1.0.19)>

found USB scanner (vendor=0x07b3, product=0x0454 [1200dpi USB Scanner], 
chip=GT-6816) at libusb:002:002

...



More information about the sane-devel mailing list