[sane-devel] Which HP-AIO Devices are supported by SANE

Simon Matter simon.matter at invoca.ch
Fri Feb 6 12:47:39 UTC 2009 

>
> Simon,
>
> The first command itself fails

It's only ONE command. Put all those rpm on one line please so they will
be installed in one step.

Simon

>
> The message is
>
> rpm -Uvh sane-backends-libs-1.0.19-10.fc9.i386.rpm
> error: Failed dependencies:
>         sane-backends = 1.0.19-10.fc9 is needed by
> sane-backends-libs-1.0.19-10.fc9.i386
>
>
>
>> Date: Fri, 6 Feb 2009 13:28:04 +0100
>> Subject: RE: [sane-devel] Which HP-AIO Devices are supported by SANE
>> From: simon.matter at invoca.ch
>> To: rohitsharma36 at hotmail.com
>> CC: kitno455 at gmail.com; sane-devel at lists.alioth.debian.org
>>
>> >
>> > I got success for libieee1284-devel-0.2.11-3.fc9.i386.rpm .
>> >
>> > But FAILED loading
>> >
>> > rpm -ivh sane-backends-libs-gphoto2-1.0.19-10.fc9.i386.rpm
>> > error: Failed dependencies:
>> >         sane-backends-libs-i386 = 1.0.19-10.fc9 is needed by
>> > sane-backends-libs-gphoto2-1.0.19-10.fc9.i386
>> >
>> > When I load
>> >
>> > rpm -ivh sane-backends-libs-1.0.19-10.fc9.i386.rpm
>> > error: Failed dependencies:
>> >         sane-backends = 1.0.19-10.fc9 is needed by
>> > sane-backends-libs-1.0.19-10.fc9.i386
>> >
>> > So why this cyclic error is occuring ?
>>
>> Because those packages depend on each other. Try:
>>
>> rpm -Uvh sane-backends-libs-1.0.19-10.fc9.i386.rpm
>> sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> sane-backends-1.0.19-10.fc9.i386.rpm
>> sane-backends-libs-gphoto2-1.0.19-10.fc9.i386.rpm
>>
>> Simon
>>
>> >
>> > Thanks
>> >
>> >
>> >> Date: Fri, 6 Feb 2009 13:13:14 +0100
>> >> Subject: RE: [sane-devel] Which HP-AIO Devices are supported by SANE
>> >> From: simon.matter at invoca.ch
>> >> To: rohitsharma36 at hotmail.com
>> >> CC: kitno455 at gmail.com; sane-devel at lists.alioth.debian.org
>> >>
>> >> >
>> >> > When I try to load sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> >> >
>> >> > rpm -ivh sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> >> >
>> >> > I get the below error message
>> >> > warning: sane-backends-devel-1.0.19-10.fc9.i386.rpm: Header V3 DSA
>> >> > signature: NOKEY, key ID 4f2a6fd2
>> >> > error: Failed dependencies:
>> >> >         gphoto2-devel is needed by
>> >> sane-backends-devel-1.0.19-10.fc9.i386
>> >> >         libieee1284-devel is needed by
>> >> > sane-backends-devel-1.0.19-10.fc9.i386
>> >>
>> >> OK, that means you nedd also install gphoto2-devel and
>> >> libieee1284-devel.
>> >> That's not a problem so far.
>> >>
>> >> >         sane-backends = 1.0.19-10.fc9 is needed by
>> >> > sane-backends-devel-1.0.19-10.fc9.i386
>> >>
>> >> Well, that one doesn't look good. You told us that you had installed
>> >> sane-backends-1.0.19-10.fc9.i386 but that doesn't seem to be the
>> case.
>> >>
>> >> Show us what you have installed:
>> >> rpm -q sane-backends sane-backends-libs
>> >>
>> >> Simon
>> >>
>> >> >         sane-backends-libs-gphoto2-i386 = 1.0.19-10.fc9 is needed
>> by
>> >> > sane-backends-devel-1.0.19-10.fc9.i386
>> >> >         sane-backends-libs-i386 = 1.0.19-10.fc9 is needed by
>> >> > sane-backends-devel-1.0.19-10.fc9.i386
>> >> >
>> >> >
>> >> > WHEN I TRY TO INSTALL  sane-backends-libs-i386 I GET A ERROR LOAD
>> >> > sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> >> >
>> >> > very annoying
>> >> >
>> >> >> Date: Fri, 6 Feb 2009 12:08:19 +0100
>> >> >> Subject: RE: [sane-devel] Which HP-AIO Devices are supported by
>> SANE
>> >> >> From: simon.matter at invoca.ch
>> >> >> To: rohitsharma36 at hotmail.com
>> >> >> CC: kitno455 at gmail.com; sane-devel at lists.alioth.debian.org
>> >> >>
>> >> >> >
>> >> >> > Hi Simon,
>> >> >> >
>> >> >> > After typing the command
>> >> >> >
>> >> >> > rpm -V sane-backends sane-backends-devel sane-backends-libs
>> >> >> >
>> >> >> > OUTPUT IS :
>> >> >> > S.5....T c /etc/sane.d/dll.conf
>> >> >> > package sane-backends-devel is not installed
>> >> >> >
>> >> >> > and when  I do a which scanimage
>> >> >> >
>> >> >> > output is /usr/bin/scanimage
>> >> >>
>> >> >> OK, that doesn't look bad.
>> >> >> Your /etc/sane.d/dll.conf has been modified. Looks at it and make
>> >> sure
>> >> >> it
>> >> >> looks sane. Make sure the hp5590 line is not commented out.
>> >> >> Since you wanted to compile some sane related software on this
>> box, I
>> >> >> suggest to install the sane-backends-devel package so you have the
>> >> sane
>> >> >> headers in place.
>> >> >> Now, what does 'scanimage -L' show?
>> >> >>
>> >> >> Simon
>> >> >>
>> >> >> >
>> >> >> >
>> >> >> >> Date: Fri, 6 Feb 2009 10:09:03 +0100
>> >> >> >> Subject: RE: [sane-devel] Which HP-AIO Devices are supported by
>> >> SANE
>> >> >> >> From: simon.matter at invoca.ch
>> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> CC: kitno455 at gmail.com; sane-devel at lists.alioth.debian.org
>> >> >> >>
>> >> >> >> >
>> >> >> >> > Hi Simon,
>> >> >> >> >
>> >> >> >> > Thanks for the deails.
>> >> >> >> >
>> >> >> >> > I have loaded Fedora 8 & on top of that I loaded
>> >> >> >> >
>> >> >> >> > sane-backends-1.0.19-10.fc9.i386.rpm
>> >> >> >> > sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> >> >> >> > sane-backends-libs-1.0.19-10.fc9.i386.rpmand compiled the
>> sane
>> >> tar
>> >> >> >> ball.
>> >> >> >>
>> >> >> >> Why any tarball, why compiling from source. If you compile from
>> >> >> source
>> >> >> >> you
>> >> >> >> don't need the rpm, if you installed the rpms, you don't need
>> >> >> compiling
>> >> >> >> from source.
>> >> >> >>
>> >> >> >> The HP 5590 is supported in
>> >> sane-backends-libs-1.0.19-10.fc9.i386.rpm
>> >> >> >> which you installed, just look at the package with 'less
>> >> >> >> sane-backends-libs-1.0.19-10.fc9.i386.rpm' and you'll see the
>> 5590
>> >> >> .so
>> >> >> >> file.
>> >> >> >>
>> >> >> >> > ./configure
>> >> >> >> > make
>> >> >> >> > make install
>> >> >> >>
>> >> >> >> With this you have messed your system. As I said, remove the
>> stuff
>> >> >> you
>> >> >> >> installed from source and check the integrity of the installed
>> >> rpms
>> >> >> with
>> >> >> >>
>> >> >> >> rpm -V sane-backends sane-backends-devel sane-backends-libs
>> >> >> >>
>> >> >> >> If that doesn't show anything wrong and there is no sane
>> related
>> >> >> stuff
>> >> >> >> in
>> >> >> >> /usr/local, it should work.
>> >> >> >>
>> >> >> >> Simon
>> >> >> >>
>> >> >> >> >
>> >> >> >> > with this I am able to run my hp 4370 scanner.
>> >> >> >> >
>> >> >> >> > But I am not able to run my HP 5590 scanner. as the so file
>> for
>> >> >> 5590
>> >> >> >> is
>> >> >> >> > missing in  /usr/lib/sane, please let me know how to get that
>> so
>> >> >> file
>> >> >> >> for
>> >> >> >> > 5590.
>> >> >> >> >
>> >> >> >> > Thanks
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >> Date: Fri, 6 Feb 2009 08:07:01 +0100
>> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO Devices are supported
>> by
>> >> >> SANE
>> >> >> >> >> From: simon.matter at invoca.ch
>> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> CC: kitno455 at gmail.com; sane-devel at lists.alioth.debian.org
>> >> >> >> >>
>> >> >> >> >> OK, you have messed up your box by wildly installing rpm
>> >> packages
>> >> >> and
>> >> >> >> >> compile from source. At least that's what I consider it.
>> >> >> >> >>
>> >> >> >> >> So, maybe you should just tell us what distribution you have
>> >> and
>> >> >> what
>> >> >> >> >> you
>> >> >> >> >> are trying to achieve.
>> >> >> >> >>
>> >> >> >> >> From what I read before you are running Fedora 9, is this
>> >> correct?
>> >> >> If
>> >> >> >> >> yes,
>> >> >> >> >> then you don't need to compile anything from source just
>> >> install
>> >> >> the
>> >> >> >> >> correct packages and it should work.
>> >> >> >> >>
>> >> >> >> >> If you really run Fedora 9, I suggest to remove all the
>> stuff
>> >> >> >> compiled
>> >> >> >> >> from source first. If you did that already you should not
>> find
>> >> any
>> >> >> >> sane
>> >> >> >> >> related thing anywhere under /usr/local.
>> >> >> >> >>
>> >> >> >> >> Then installing the following packages should give you a
>> >> running
>> >> >> >> sane:
>> >> >> >> >> sane-backends-1.0.19-10.fc9.i386.rpm
>> >> >> >> >> sane-backends-devel-1.0.19-10.fc9.i386.rpm
>> >> >> >> >> sane-backends-libs-1.0.19-10.fc9.i386.rpm
>> >> >> >> >>
>> >> >> >> >> If rpm complains that one or more of the packages are
>> already
>> >> >> >> installed,
>> >> >> >> >> you can still reinstall the package by doing 'rpm -Uvh
>> >> >> --replacefiles
>> >> >> >> >> --replacepkgs ...'
>> >> >> >> >>
>> >> >> >> >> Hope that helps,
>> >> >> >> >> Simon
>> >> >> >> >>
>> >> >> >> >> >
>> >> >> >> >> > 1) Entered in sane source and executed make uninstall that
>> >> >> >> >> > removed
>> >> >> >> >> > /usr/local/bin
>> >> >> >> >> >
>> >> >> >> >> > 2nd typed the command ./configure /usr/etc
>> --disable-locking
>> >> >> >> >> >
>> >> >> >> >> > 3rd make
>> >> >> >> >> >
>> >> >> >> >> > 4th typed the command rm -rf /etc/sane.d
>> >> >> >> >> >
>> >> >> >> >> > 5th make install
>> >> >> >> >> >
>> >> >> >> >> > RESULT:
>> >> >> >> >> > if i type the command `./configure --prefix=/usr
>> >> >> --sysconfdir=/etc
>> >> >> >> >> > --disable-locking`
>> >> >> >> >> >  bash: checking: command not found
>> >> >> >> >> >
>> >> >> >> >> > if I type  ./configure /usr/etc --disable-locking
>> >> >> >> >> > This error comes
>> >> >> >> >> > configure: WARNING: you should use --build, --host,
>> --target
>> >> >> >> >> > configure: WARNING: invalid host type: /usr/etc
>> >> >> >> >> > checking build system type... Invalid configuration
>> >> `/usr/etc':
>> >> >> >> >> machine
>> >> >> >> >> > `/usr/etc' not recognized
>> >> >> >> >> > configure: error: /bin/sh ./config.sub /usr/etc failed
>> >> >> >> >> >
>> >> >> >> >> > So please let me know is --disable-locking some argument ?
>> >> >> >> >> >
>> >> >> >> >> > Thanks
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >
>> >> >> >> >> >> Date: Thu, 5 Feb 2009 10:16:24 -0500
>> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO Devices are
>> supported
>> >> by
>> >> >> >> SANE
>> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> >>
>> >> >> >> >> >> run the first command, without the quotes around it.
>> >> >> >> >> >>
>> >> >> >> >> >> allan
>> >> >> >> >> >>
>> >> >> >> >> >> On Thu, Feb 5, 2009 at 10:13 AM, rohit bal
>> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> wrote:
>> >> >> >> >> >> > hi Allan,
>> >> >> >> >> >> >
>> >> >> >> >> >> > if i type the command `./configure --prefix=/usr
>> >> >> >> --sysconfdir=/etc
>> >> >> >> >> >> > --disable-locking`
>> >> >> >> >> >> > bash: checking: command not found
>> >> >> >> >> >> >
>> >> >> >> >> >> >
>> >> >> >> >> >> > if I type  ./configure /usr/etc --disable-locking
>> >> >> >> >> >> > This error comes
>> >> >> >> >> >> > configure: WARNING: you should use --build, --host,
>> >> --target
>> >> >> >> >> >> > configure: WARNING: invalid host type: /usr/etc
>> >> >> >> >> >> > checking build system type... Invalid configuration
>> >> >> `/usr/etc':
>> >> >> >> >> >> machine
>> >> >> >> >> >> > `/usr/etc' not recognized
>> >> >> >> >> >> > configure: error: /bin/sh ./config.sub /usr/etc failed
>> >> >> >> >> >> >
>> >> >> >> >> >> > So please let me know is --disable-locking some
>> argument ?
>> >> >> >> >> >> >
>> >> >> >> >> >> > Regards,
>> >> >> >> >> >> > Roh
>> >> >> >> >> >> >
>> >> >> >> >> >> >
>> >> >> >> >> >> >
>> >> >> >> >> >> >> Date: Thu, 5 Feb 2009 09:59:59 -0500
>> >> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO Devices are
>> >> supported
>> >> >> by
>> >> >> >> >> SANE
>> >> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> WHY CAN YOU NOT RUN THE COMMANDS AS I SENT THEM TO
>> YOU?
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> allan
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> On Thu, Feb 5, 2009 at 9:59 AM, rohit bal
>> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> > step 2 gives error
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > ./configure /usr/etc --disable-locking
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > configure: WARNING: you should use --build, --host,
>> >> >> --target
>> >> >> >> >> >> >> > configure: WARNING: invalid host type: /usr/etc
>> >> >> >> >> >> >> > checking build system type... Invalid configuration
>> >> >> >> `/usr/etc':
>> >> >> >> >> >> machine
>> >> >> >> >> >> >> > `/usr/etc' not recognized
>> >> >> >> >> >> >> > configure: error: /bin/sh ./config.sub /usr/etc
>> failed
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> Date: Thu, 5 Feb 2009 09:55:22 -0500
>> >> >> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO Devices are
>> >> >> supported
>> >> >> >> by
>> >> >> >> >> >> SANE
>> >> >> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> I said all.
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> allan
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> On Thu, Feb 5, 2009 at 9:53 AM, rohit bal
>> >> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> >> > shall I follow all steps 1 to 5 or only 3 to 5
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> Date: Thu, 5 Feb 2009 09:50:11 -0500
>> >> >> >> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO Devices
>> are
>> >> >> >> supported
>> >> >> >> >> by
>> >> >> >> >> >> SANE
>> >> >> >> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> On Thu, Feb 5, 2009 at 9:47 AM, rohit bal
>> >> >> >> >> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> >> >> > Hi Allan,
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > The steps I followed were
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > 1) Entered in sane source and executed 'make
>> >> >> uninstall'
>> >> >> >> >> that
>> >> >> >> >> >> >> >> >> > removed
>> >> >> >> >> >> >> >> >> > /usr/local/bin
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > 2nd typed the command ./configure /usr/etc
>> >> >> >> >> --disable-locking
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
>> >> >> >> >> >> >> >> >> this above is not what i told you to type. try
>> all
>> >> >> steps
>> >> >> >> >> again.
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > 3rd make
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > 4th typed the command rm -rf /etc/sane.d
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > 5th make install
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > After that I saw there is a copy of sane
>> folder
>> >> in
>> >> >> >> >> >> /usr/local/lib
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > in /usr/local/bin I have only 3
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > executables(scanimage,gamma4scanimage,sane-find-scanner,sane-config
>> >> >> >> >> >> >> >> >> > file).
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > and Which scanimage stills shows old path
>> >> >> >> /usr/local/bin
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > Thanks
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> Date: Thu, 5 Feb 2009 09:29:14 -0500
>> >> >> >> >> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO
>> Devices
>> >> are
>> >> >> >> >> supported
>> >> >> >> >> >> by
>> >> >> >> >> >> >> >> >> >> SANE
>> >> >> >> >> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> >> >> >> >> To: rohitsharma36 at hotmail.com
>> >> >> >> >> >> >> >> >> >> CC: sane-devel at lists.alioth.debian.org
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> 1. cd into your source and run 'make
>> uninstall'.
>> >> >> that
>> >> >> >> >> should
>> >> >> >> >> >> >> >> >> >> remove
>> >> >> >> >> >> >> >> >> >> everything sane related from /usr/local
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> 2. `./configure --prefix=/usr
>> --sysconfdir=/etc
>> >> >> >> >> >> >> >> >> >> --disable-locking`
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> 3. make
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> 5. make install
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> allan
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> On Thu, Feb 5, 2009 at 9:16 AM, rohit bal
>> >> >> >> >> >> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> >> >> >> > Hi Allan,
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > So shall I remove the /usr/local/bin one or
>> >> >> >> >> /usr/lib/sane.
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > in /usr/local/bin I have only 3
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > executables(scanimage,gamma4scanimage,sane-find-scanner,sane-config
>> >> >> >> >> >> >> >> >> >> > file).
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > In /usr/lib/sane I have all .so files.
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > What is the command to uninstall sane.
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > Thanks,
>> >> >> >> >> >> >> >> >> >> > Rohi
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> >> Date: Thu, 5 Feb 2009 09:02:19 -0500
>> >> >> >> >> >> >> >> >> >> >> Subject: Re: [sane-devel] Which HP-AIO
>> >> Devices
>> >> >> are
>> >> >> >> >> >> supported
>> >> >> >> >> >> >> >> >> >> >> by
>> >> >> >> >> >> >> >> >> >> >> SANE
>> >> >> >> >> >> >> >> >> >> >> From: kitno455 at gmail.com
>> >> >> >> >> >> >> >> >> >> >> To: rohitsharma36 at hotmail.com;
>> >> >> >> >> >> >> >> >> >> >> sane-devel at lists.alioth.debian.org
>> >> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> >> On Thu, Feb 5, 2009 at 8:54 AM, rohit bal
>> >> >> >> >> >> >> >> >> >> >> <rohitsharma36 at hotmail.com>
>> >> >> >> >> >> >> >> >> >> >> wrote:
>> >> >> >> >> >> >> >> >> >> >> > ohh I am very sorry I did not understand
>> >> what
>> >> >> you
>> >> >> >> >> said
>> >> >> >> >> >> >> >> >> >> >> > earlier.
>> >> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> >> > now I typed which scanimage , the output
>> is
>> >> >> below
>> >> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> >> > OUTPUT:>/usr/local/bin/scanimage
>> >> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> >> and there is your problem. You have two
>> >> copies
>> >> >> of
>> >> >> >> sane
>> >> >> >> >> >> >> >> >> >> >> installed.
>> >> >> >> >> >> >> >> >> >> >> The
>> >> >> >> >> >> >> >> >> >> >> copy in /usr/local has support for the
>> newer
>> >> >> >> scanners,
>> >> >> >> >> >> the
>> >> >> >> >> >> >> >> >> >> >> system
>> >> >> >> >> >> >> >> >> >> >> copy
>> >> >> >> >> >> >> >> >> >> >> in /usr does not. Your $PATH has set
>> >> >> /usr/local/bin
>> >> >> >> to
>> >> >> >> >> >> come
>> >> >> >> >> >> >> >> >> >> >> first,
>> >> >> >> >> >> >> >> >> >> >> so
>> >> >> >> >> >> >> >> >> >> >> you are running that copy of scanimage,
>> which
>> >> is
>> >> >> >> >> linked
>> >> >> >> >> >> >> >> >> >> >> against
>> >> >> >> >> >> >> >> >> >> >> the
>> >> >> >> >> >> >> >> >> >> >> newer sane you built from source. Your
>> >> program
>> >> >> >> >> compiles
>> >> >> >> >> >> and
>> >> >> >> >> >> >> >> >> >> >> links
>> >> >> >> >> >> >> >> >> >> >> against the system copy, because your
>> linker
>> >> >> does
>> >> >> >> not
>> >> >> >> >> >> look in
>> >> >> >> >> >> >> >> >> >> >> /usr/local/lib first.
>> >> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> >> The fix for this is something i mentioned
>> >> about
>> >> >> 50
>> >> >> >> >> mails
>> >> >> >> >> >> ago:
>> >> >> >> >> >> >> >> >> >> >> you
>> >> >> >> >> >> >> >> >> >> >> should remove the copy of sane from
>> >> /usr/local,
>> >> >> and
>> >> >> >> >> >> instead
>> >> >> >> >> >> >> >> >> >> >> rerun
>> >> >> >> >> >> >> >> >> >> >> configure with the proper arguments to
>> >> overwrite
>> >> >> >> the
>> >> >> >> >> >> system
>> >> >> >> >> >> >> >> >> >> >> copy
>> >> >> >> >> >> >> >> >> >> >> of
>> >> >> >> >> >> >> >> >> >> >> sane, then make && make install.
>> >> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> >> allan
>> >> >> >> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> >> > ________________________________
>> >> >> >> >> >> >> >> >> >> > Akshay Kumar takes on the two reigning
>> >> Bollywood
>> >> >> >> Khans.
>> >> >> >> >> >> Catch
>> >> >> >> >> >> >> >> >> >> > the
>> >> >> >> >> >> >> >> >> >> > action
>> >> >> >> >> >> >> >> >> >> > on
>> >> >> >> >> >> >> >> >> >> > MSN Entertainment! Check it out!
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> >> > ________________________________
>> >> >> >> >> >> >> >> >> > Akshay Kumar takes on the two reigning
>> Bollywood
>> >> >> Khans.
>> >> >> >> >> Catch
>> >> >> >> >> >> the
>> >> >> >> >> >> >> >> >> > action
>> >> >> >> >> >> >> >> >> > on
>> >> >> >> >> >> >> >> >> > MSN Entertainment! Check it out!
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >> >> >> >
>> >> >> >> >> >> >> >> > ________________________________
>> >> >> >> >> >> >> >> > Get a view of the world through MSN Video. Some
>> >> things
>> >> >> >> just
>> >> >> >> >> >> cannot be
>> >> >> >> >> >> >> >> > left
>> >> >> >> >> >> >> >> > unseen. Try it!
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >>
>> >> >> >> >> >> >> >> --
>> >> >> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >> >> >
>> >> >> >> >> >> >> > ________________________________
>> >> >> >> >> >> >> > Need more space to upload pictures? Get 25 GB online
>> >> >> storage
>> >> >> >> >> with
>> >> >> >> >> >> >> > Windows
>> >> >> >> >> >> >> > Live SkyDrive! Try it!
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >>
>> >> >> >> >> >> >> --
>> >> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >> >
>> >> >> >> >> >> > ________________________________
>> >> >> >> >> >> > Discover your phone style & WIN a Windows Mobile phone.
>> >> Your
>> >> >> >> style!
>> >> >> >> >> >> Try it
>> >> >> >> >> >> > now!
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >>
>> >> >> >> >> >> --
>> >> >> >> >> >> "The truth is an offense, but not a sin"
>> >> >> >> >> >
>> >> >> >> >> > _________________________________________________________________
>> >> >> >> >> > Find a better job. We have plenty. Visit MSN Jobs
>> >> >> >> >> > http://www.in.msn.com/jobs--
>> >> >> >> >> > sane-devel mailing list:
>> sane-devel at lists.alioth.debian.org
>> >> >> >> >> > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> >> >> >> >> > Unsubscribe: Send mail with subject "unsubscribe
>> >> your_password"
>> >> >> >> >> >              to sane-devel-request at lists.alioth.debian.org
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> > _________________________________________________________________
>> >> >> >> > Wish to Marry Now? Join MSN Matrimony FREE!
>> >> >> >> > http://www.in.msn.com/matrimony
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >> > _________________________________________________________________
>> >> >> > Plug in to the MSN Tech channel for a full update on the latest
>> >> gizmos
>> >> >> > that made an impact.
>> >> >> > http://computing.in.msn.com/
>> >> >>
>> >> >>
>> >> >
>> >> > _________________________________________________________________
>> >> > Find a better job. We have plenty. Visit MSN Jobs
>> >> > http://www.in.msn.com/jobs
>> >>
>> >>
>> >
>> > _________________________________________________________________
>> > Chose your Life Partner! Join MSN Matrimony FREE
>> > http://www.in.msn.com/matrimony
>>
>>
>
> _________________________________________________________________
> Find a better job. We have plenty. Visit MSN Jobs
> http://www.in.msn.com/jobs

More information about the sane-devel mailing list