[sane-devel] HP Scanjet G 2710
m. allan noah
kitno455 at gmail.com
Sun Feb 22 17:51:08 UTC 2009
it is supported, upgrade to sane cvs.
http://www.sane-project.org/lists/sane-backends-cvs.html#S-HP3900
allan
On Sun, Feb 22, 2009 at 11:50 AM, Peter Hoyer <peter.hoyer at gmx.de> wrote:
> I would appreciate the support of the hp scanjet G 2710 by the sane project
> and enclose the following output of the sane-find-scanner:
>
> kind regards
>
> Peter
>
> cat /proc/bus/usb/devices find nothing
>
> This is sane-find-scanner from sane-backends 1.0.19
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Invalid argument)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Invalid argument)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
> # No SCSI scanners found. If you expected something different, make sure
> that
> # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x03f0/0x2805 at 005:006 (hewlett packard hp scanjet)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x03F0
> idProduct 0x2805
> bcdDevice 1.00
> iManufacturer 1 (hewlett packard)
> iProduct 2 (hp scanjet)
> iSerialNumber 3 (CN78GA539F0530)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 4 (USB SCANNER)
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 2 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255
> bInterfaceSubClass 0
> bInterfaceProtocol 255
> iInterface 5 (Bulk-In, Bulk-Out, Interrupt Interface)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 12 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bcdUSB = 0x200)
> checking for GT-8911 ...
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bcdUSB = 0x200)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL84x ...
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822 ...
> <This USB chip looks like a RTS8822 (result from sane-backends 1.0.19)>
>
> found USB scanner (vendor=0x03f0 [hewlett packard], product=0x2805 [hp
> scanjet], chip=RTS8822) at libusb:005:006
>
> <device descriptor of 0x18a5/0x0214 at 005:004 (Verbatim Portable USB Drive)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x18A5
> idProduct 0x0214
> bcdDevice 1.03
> iManufacturer 2 (Verbatim)
> iProduct 3 (Portable USB Drive)
> iSerialNumber 1 (683000003Ef4)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 4 (Bulk Only Configuration)
> bmAttributes 192 (Self-powered)
> MaxPower 2 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8
> bInterfaceSubClass 6
> bInterfaceProtocol 80
> iInterface 5 (Bulk Only Interface)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x05e3/0x070e at 005:005 (USB Storage)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x05E3
> idProduct 0x070E
> bcdDevice 150.02
> iManufacturer 0 ()
> iProduct 1 (USB Storage)
> iSerialNumber 2 (000000009602)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 128 ()
> MaxPower 500 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8
> bInterfaceSubClass 6
> bInterfaceProtocol 80
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x05e3/0x0608 at 005:003 (USB2.0 Hub)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 1
> bMaxPacketSize0 64
> idVendor 0x05E3
> idProduct 0x0608
> bcdDevice 7.02
> iManufacturer 0 ()
> iProduct 1 (USB2.0 Hub)
> iSerialNumber 0 ()
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 100 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 12 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0002 at 005:001 (Linux 2.6.27.7-9-default
> ehci_hcd EHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0002
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.27.7-9-default ehci_hcd)
> iProduct 2 (EHCI Host Controller)
> iSerialNumber 1 (0000:00:0b.2)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 4
> bInterval 12 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0001 at 004:001 (Linux 2.6.27.7-9-default
> uhci_hcd UHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.27.7-9-default uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:04.3)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.27.7-9-default
> uhci_hcd UHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.27.7-9-default uhci_hcd)
> iProduct 2 (UHCI Host Controller)
> iSerialNumber 1 (0000:00:04.2)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x050d/0x0121 at 001:003 (ADMtek USB To LAN Converter)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 8
> idVendor 0x050D
> idProduct 0x0121
> bcdDevice 1.01
> iManufacturer 1 (ADMtek)
> iProduct 2 (USB To LAN Converter)
> iSerialNumber 3 (0001)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 160 (Remote Wakeup)
> MaxPower 160 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 0
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 8
> bInterval 128 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GT-8911 ...
> this is not a GT-8911 (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for MA-1017 ...
> this is not a MA-1017 (bcdUSB = 0x110)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for GL84x ...
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 0)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 0)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x110)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822 ...
> this is not a RTS8822 (bEndpointAddress = 0x81, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
> checking for rts8858c ...
> this is not a rts8858c (bEndpointAddress = 0x2, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
> checking for SQ113 ...
> this is not a SQ113 (bcdUSB = 0x110)
> checking for HP5550/5590/7650 chipset ...
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
> checking for rts8801/rts8891 ...
> this is not a rts8801/rts8891 (bEndpointAddress = 0x2, bmAttributes = 0x2,
> wMaxPacketSize = 0x40, bInterval = 0x0)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.19)>
>
> found USB scanner (vendor=0x050d [ADMtek], product=0x0121 [USB To LAN
> Converter]) at libusb:001:003
>
> <device descriptor of 0x1d6b/0x0001 at 001:001 (Linux 2.6.27.7-9-default
> ohci_hcd OHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.27.7-9-default ohci_hcd)
> iProduct 2 (OHCI Host Controller)
> iSerialNumber 1 (0000:00:0b.0)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.27.7-9-default
> ohci_hcd OHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.27.7-9-default ohci_hcd)
> iProduct 2 (OHCI Host Controller)
> iSerialNumber 1 (0000:00:0b.1)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
> # Your USB scanner was (probably) detected. It may or may not be supported
> by
> # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
> done
>
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list