[sane-devel] Canon MF4660 test/debug

Sat Jan 17 15:51:51 UTC 2009

Great, thanks for the quick reply!

Here is the output of the scanimage -T

$ export SANE_DEBUG_PIXMA=10
$ scanimage -T
[sanei_debug] Setting debug level of pixma to 10.
[pixma] pixma version 0.15.0
[pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at
libusb:005:004
[pixma] sanei_bjnp_find_devices:
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] pixma_find_scanners() found 1 devices
[pixma] pixma_collect_devices() found Canon imageCLASS MF4690 at
libusb:005:004
[pixma] sanei_bjnp_find_devices:
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] pixma_open(): Canon imageCLASS MF4690
[pixma] Trying to clear the interrupt buffer...
[pixma]   no packets in buffer
[pixma] Reader task id=12781 (forked)
scanimage: scanning image of size 640x877 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1920 bytes...    [pixma] Reader task
started
[pixma]
[pixma] pixma_scan(): start
[pixma]   line_size=1920 image_size=1683840 channels=3 depth=8
[pixma]   dpi=75x75 offset=(0,0) dimension=640x877
[pixma]   gamma_table=0x8ade184 source=0
[pixma] raw_width = 640
[pixma] OUT  T=3.565 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00
[pixma]
[pixma] IN   T=3.567 len=14
[pixma]  00000000:06 06 03 00 00 41 03 00  41 10 00 00 00 68
[pixma]
[pixma] Current status: paper=0 cal=0 lamp=16
[pixma] Current status: paper=0 cal=0 lamp=16
[pixma] OUT  T=3.568 len=20
[pixma]  00000000:cf 60 00 00 00 00 00 00  0a 00 01 00 00 00 00 00
[pixma]  00000010:00 00 00 ff
[pixma]
[pixma] IN   T=3.575 len=2
[pixma]  00000000:06 06
[pixma]
[pixma] OUT  T=3.575 len=20
[pixma]  00000000:cf 60 00 00 00 00 00 00  0a 00 01 00 00 04 00 00
[pixma]  00000010:00 00 00 fb
[pixma]
[pixma] IN   T=3.582 len=2
[pixma]  00000000:06 06
[pixma]
[pixma] OUT  T=3.598 len=10
[pixma]  00000000:db 20 00 00 00 00 00 00  00 00
[pixma]
[pixma] IN   T=3.633 len=2
[pixma]  00000000:06 06
[pixma]
[pixma] OUT  T=3.633 len=21
[pixma]  00000000:dd 20 00 00 00 00 00 00  0b 00 01 00 00 00 00 00
[pixma]  00000010:00 00 00 00 ff
[pixma]
[pixma] BUG:Unmapped SANE Status code 5
[pixma] IN   T=3.636 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 8 sec.
[pixma] IN   T=4.640 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 7 sec.
[pixma] IN   T=5.645 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 6 sec.
[pixma] IN   T=6.646 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 5 sec.
[pixma] IN   T=7.648 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 4 sec.
[pixma] IN   T=8.652 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 3 sec.
[pixma] IN   T=9.653 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 2 sec.
[pixma] IN   T=10.657 len=-9
[pixma]   ERROR: ETIMEDOUT
[pixma]
[pixma] No response yet. Timed out in 1 sec.
[pixma] WARNING:Error in response phase. cmd:404a
[pixma]    If the scanner hangs, reset it and/or unplug the USB cable.
[pixma] OUT  T=10.657 len=10
[pixma]  00000000:ef 20 00 00 00 00 00 00  00 00
[pixma]
[pixma] IN   T=10.663 len=2
[pixma]  00000000:06 06
[pixma]
[pixma] OUT  T=10.663 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00
[pixma]
[pixma] IN   T=10.667 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 10 00 01 00 66
[pixma]
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] OUT  T=10.668 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00
[pixma]
[pixma] IN   T=10.670 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 10 00 01 00 66
[pixma]
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] OUT  T=10.670 len=20
[pixma]  00000000:cf 60 00 00 00 00 00 00  0a 00 01 00 00 00 00 00
[pixma]  00000010:00 00 00 ff
[pixma]
[pixma] IN   T=10.674 len=2
[pixma]  00000000:06 06
[pixma]
[pixma] OUT  T=10.674 len=10
[pixma]  00000000:f3 20 00 00 00 00 00 00  0c 00
[pixma]
[pixma] IN   T=10.677 len=14
[pixma]  00000000:06 06 03 01 00 41 03 00  41 10 00 01 00 66
[pixma]
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] Current status: paper=1 cal=0 lamp=16
[pixma] pixma_scan() failed ETIMEDOUT
[pixma] Reader task terminated: ETIMEDOUT
[pixma] read_image():reader task closed the pipe:0 bytes received, 1683840
bytes expected
FAIL Error: Error during device I/O
[pixma] pixma_close(): Canon imageCLASS MF4690
$

2009/1/17 Nicolas Martin <nicolas.martin at freesurf.fr>

> This Multifunction scanner should be candidate to be handled by the
> pixma backend, where it is declared.
>
> In order to check what's going on, could you run scanimage as follows:
>
> $ export SANE_DEBUG_PIXMA=10
> $ scanimage -T
>
> and send back the content of the console.
>
> Nicolas
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20090117/254fd592/attachment.htm 