[sane-devel] CanoScan LiDE 60: Document feeder jammed

[Tobias Preclik]

Thanks for sorting this out. Didn't know the device has a lock switch
and was confused by the "document feeder jammed" message. Anyways

Thanks,
Tobias

m. allan noah wrote:
> Is the scanner head locked?
> 
> allan
> 
> On Sun, Jan 25, 2009 at 4:19 PM, Tobias Preclik <sane at tobias.preclik.de> wrote:
>> Hello devs,
>>
>> I just tried to configure my CanoScan LiDE 60 scanner with linux. I
>> installed sane-1.0.19 with the genesys backend and libusb support
>> enabled. The scanner is detected with sane-find-scanner and scanimage -L
>> also lists it (also as a user). In other words it should work. However
>> scanning does not work: The light flashes for an instant and the
>> scanning head quivers for an instant but then the following message is
>> reported:
>>
>> $ scanimage > test.pnm
>> [genesys_gl841] **********************************************
>> [genesys_gl841] **********************************************
>> [genesys_gl841] ****                                      ****
>> [genesys_gl841] ****  Extremely low Brightness detected.  ****
>> [genesys_gl841] ****  Check the scanning head is          ****
>> [genesys_gl841] ****  unlocked and moving.                ****
>> [genesys_gl841] ****                                      ****
>> [genesys_gl841] **********************************************
>> [genesys_gl841] **********************************************
>> scanimage: sane_start: Document feeder jammed
>>
>> I'm not sure if it helps but I appended some dll debug output. Any Ideas
>> what is going wrong? Please let me know if you need more debugging
>> information.
>>
>> regards,
>> Tobias
>>
>> [dll] sane_get_devices: found 1 devices
>> [dll] sane_open: trying to open `genesys:libusb:001:014'
>> [dll] sane_open: open successful
>> [dll]
>> sane_control_option(handle=0x60f870,option=0,action=0,value=0x7fff4df6daa8,info=(nil))
>> [dll]
>> sane_control_option(handle=0x60f870,option=0,action=0,value=0x7fff4df6c9ac,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=0)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=1)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=2)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=3)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=4)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=5)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=6)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=7)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=8)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=9)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=10)
>> [dll]
>> sane_control_option(handle=0x60f870,option=10,action=0,value=0x60a5e0,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=11)
>> [dll]
>> sane_control_option(handle=0x60f870,option=11,action=0,value=0x60a5e4,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=12)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=13)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=14)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=15)
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=16)
>> [dll]
>> sane_control_option(handle=0x60f870,option=8,action=0,value=0x7fff4df6c9a8,info=(nil))
>> [dll]
>> sane_control_option(handle=0x60f870,option=9,action=0,value=0x7fff4df6c9a8,info=(nil))
>> [dll]
>> sane_control_option(handle=0x60f870,option=8,action=0,value=0x7fff4df6da9c,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=10)
>> [dll]
>> sane_control_option(handle=0x60f870,option=10,action=1,value=0x7fff4df6daa0,info=0x7fff4df6c99c)
>> [dll]
>> sane_control_option(handle=0x60f870,option=9,action=0,value=0x7fff4df6da9c,info=(nil))
>> [dll] sane_get_option_descriptor(handle=0x60f870,option=11)
>> [dll]
>> sane_control_option(handle=0x60f870,option=11,action=1,value=0x7fff4df6daa0,info=0x7fff4df6c99c)
>> [dll] sane_start(handle=0x60f870)
>> [genesys_gl841] **********************************************
>> [genesys_gl841] **********************************************
>> [genesys_gl841] ****                                      ****
>> [genesys_gl841] ****  Extremely low Brightness detected.  ****
>> [genesys_gl841] ****  Check the scanning head is          ****
>> [genesys_gl841] ****  unlocked and moving.                ****
>> [genesys_gl841] ****                                      ****
>> [genesys_gl841] **********************************************
>> [genesys_gl841] **********************************************
>> scanimage: sane_start: Document feeder jammed
>> [dll] sane_cancel(handle=0x60f870)
>> [dll] sane_close(handle=0x60f870)
>> [dll] sane_exit: exiting
>> [dll] sane_exit: calling backend `genesys's exit function
>> [dll] sane_exit: finished
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
>>
> 
> 
>