[sane-devel] Fwd: avision: troubleshooting Lexmark X340 support on OSX
m. allan noah
kitno455 at gmail.com
Thu Jul 2 12:37:25 UTC 2009
Probably libusb, but it could be choking because the driver did
something weird to the scanner, or the scanner has a firmware bug. Any
chance you can verify that it works on linux?
allan
On Thu, Jul 2, 2009 at 5:05 AM, Paul te Bokkel<paul at tebokkel.com> wrote:
> Nobody? Just the simple question: does a "pipe is stalled" error look like a
> libusb problem or avision/sane for an AVision OEM (Lexmark)?
> Paul
> Begin forwarded message:
> Van: Paul te Bokkel <paul at tebokkel.com>
> Datum: 26 juni 2009 16:51:26 GMT+02:00
> Aan: sane-devel at lists.alioth.debian.org
> Onderwerp: [sane-devel] avision: troubleshooting Lexmark X340 support on OSX
> Hi all,
>
> I have the latest SDK's for SANE installed on OSX (10.5.7, Intel). Added the
> USB-ID's for the Lexmark X340 (as a copy of the Avision MF3000 - AIO with
> ADF) to the Avision-backend, build, installed and tried to scan.
>
> Somehow the USB-chip on the printer seems to stall when scanning. After it's
> stalled, only a power cycle from the printer seems to help.
> Running scanimage -L repeatedly is not a problem (logging below).
> Sane-find-scanner is also not a problem.
>
> Running a scanimage gives up with an "pipe is stalled" error. I never seem
> to get output files bigger than about 60800 bytes (or less if scan area is
> limited). Essentials of logging (all full logging also attached):
>
> (...)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 15170 bytes of data on
> endpoint 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] No data arrived.
> (...)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 7266 bytes of data on
> endpoint 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] No data arrived.
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
>
>
> Is this an libusb error or avision driver problem?
> Or is anything wrong or missing for the avision settings?
> I recompiled the avision backend with AV_NO_64BYTE_ALIGN. Didn't change a
> thing.
>
>
> Paul
>
>
> All logging run with SANE_DEBUG=255 USB_DEBUG=255 SANE_DEBUG_AVISION=7
>
> =========================================
> output of scanimage -B > output.pnm
> (logging starts after warming up)
> =========================================
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] wait_4_light: command is 0. Result is on
> [avision] set_window:
> [avision] set_window: base_dpi_abs: 1200, base_dpi_rel: 1200
> [avision] set_window: base paralen: 7
> [avision] set_window: final paralen: 20
> [avision] set_window: transferlen: 70
> [avision] set_window: large data-transfer support (>16bit)!
> [avision] set_window: source mode 0 source mode dim 0
> [avision] window_data_header:
> [avision] [0] 00000000b 0o 0d 0x
> [avision] [1] 00000000b 0o 0d 0x
> [avision] [2] 00000000b 0o 0d 0x
> [avision] [3] 00000000b 0o 0d 0x
> [avision] [4] 00000000b 0o 0d 0x
> [avision] [5] 00000000b 0o 0d 0x
> [avision] [6] 00000000b 0o 0d 0x
> [avision] [7] 00111110b 76o 62d 3ex
> [avision] window_descriptor:
> [avision] [0] 00000000b 0o 0d 0x
> [avision] [1] 00000000b 0o 0d 0x
> [avision] [2] 00000000b 0o 0d 0x
> [avision] [3] 10010110b 226o 150d 96x
> [avision] [4] 00000000b 0o 0d 0x
> [avision] [5] 10010110b 226o 150d 96x
> [avision] [6] 00000000b 0o 0d 0x
> [avision] [7] 00000000b 0o 0d 0x
> [avision] [8] 00000000b 0o 0d 0x
> [avision] [9] 00000000b 0o 0d 0x
> [avision] [10] 00000000b 0o 0d 0x
> [avision] [11] 00000000b 0o 0d 0x
> [avision] [12] 00000000b 0o 0d 0x
> [avision] [13] 00000000b 0o 0d 0x
> [avision] [14] 00000000b 0o 0d 0x
> [avision] [15] 00000000b 0o 0d 0x
> [avision] [16] 00100111b 47o 39d 27x
> [avision] [17] 10000001b 201o 129d 81x
> [avision] [18] 00000000b 0o 0d 0x
> [avision] [19] 00000000b 0o 0d 0x
> [avision] [20] 01000001b 101o 65d 41x
> [avision] [21] 10000001b 201o 129d 81x
> [avision] [22] 10000000b 200o 128d 80x
> [avision] [23] 10000000b 200o 128d 80x
> [avision] [24] 10000000b 200o 128d 80x
> [avision] [25] 00000101b 5o 5d 5x
> [avision] [26] 00001000b 10o 8d 8x
> [avision] [27] 00000000b 0o 0d 0x
> [avision] [28] 00000000b 0o 0d 0x
> [avision] [29] 00000011b 3o 3d 3x
> [avision] [30] 00000000b 0o 0d 0x
> [avision] [31] 00000000b 0o 0d 0x
> [avision] [32] 00000000b 0o 0d 0x
> [avision] [33] 00000000b 0o 0d 0x
> [avision] [34] 00000000b 0o 0d 0x
> [avision] [35] 00000000b 0o 0d 0x
> [avision] [36] 00000000b 0o 0d 0x
> [avision] [37] 00000000b 0o 0d 0x
> [avision] [38] 00000000b 0o 0d 0x
> [avision] [39] 00000000b 0o 0d 0x
> [avision] [40] 11111111b 377o 255d ffx
> [avision] [41] 00010100b 24o 20d 14x
> [avision] [42] 01100000b 140o 96d 60x
> [avision] [43] 11111111b 377o 255d ffx
> [avision] [44] 00000000b 0o 0d 0x
> [avision] [45] 00001110b 16o 14d ex
> [avision] [46] 11010000b 320o 208d d0x
> [avision] [47] 00001000b 10o 8d 8x
> [avision] [48] 00110000b 60o 48d 30x
> [avision] [49] 00010000b 20o 16d 10x
> [avision] [50] 00000000b 0o 0d 0x
> [avision] [51] 00000000b 0o 0d 0x
> [avision] [52] 00000000b 0o 0d 0x
> [avision] [53] 00000000b 0o 0d 0x
> [avision] [54] 00000000b 0o 0d 0x
> [avision] [55] 00000000b 0o 0d 0x
> [avision] [56] 00000000b 0o 0d 0x
> [avision] [57] 00000000b 0o 0d 0x
> [avision] [58] 00000000b 0o 0d 0x
> [avision] [59] 00000000b 0o 0d 0x
> [avision] [60] 00000000b 0o 0d 0x
> [avision] [61] 00000000b 0o 0d 0x
> [avision] [62] 00000000b 0o 0d 0x
> [avision] [63] 00000000b 0o 0d 0x
> [avision] set_window: [0] window_id: 0
> [avision] set_window: [2-3] x-axis res: 150
> [avision] set_window: [4-5] y-axis res: 150
> [avision] set_window: [6-9] x-axis upper left: 0
> [avision] set_window: [10-13] y-axis upper left: 0
> [avision] set_window: [14-17] window width: 10113
> [avision] set_window: [18-21] window length: 16769
> [avision] set_window: [22] brightness: 128
> [avision] set_window: [23] threshold: 128
> [avision] set_window: [24] contrast: 128
> [avision] set_window: [25] image composition: 5
> [avision] set_window: [26] bits per channel: 8
> [avision] set_window: [27-28] halftone pattern: 0
> [avision] set_window: [29] padding_and_bitset: 3
> [avision] set_window: [30-31] bit ordering: 0
> [avision] set_window: [32] compression type: 0
> [avision] set_window: [33] compression argument: 0
> [avision] set_window: [34-35] paper length: 0
> [avision] set_window: [40] vendor id: ff
> [avision] set_window: [41] param lenght: 20
> [avision] set_window: [42] bitset1: 60
> [avision] set_window: [43] highlight: 255
> [avision] set_window: [44] shadow: 0
> [avision] set_window: [45-46] line-width: 3792
> [avision] set_window: [47-48] line-count: 2096
> [avision] set_window: [49] bitset2: 10
> [avision] set_window: [50] ir exposure time: 0
> [avision] set_window: [51-52] r exposure: 0
> [avision] set_window: [53-54] g exposure: 0
> [avision] set_window: [55-56] b exposure: 0
> [avision] set_window: [57] bitset3: 0
> [avision] set_window: [58] auto focus: 0
> [avision] set_window: [59] line-width (MSB): 0
> [avision] set_window: [60] line-count (MSB): 0
> [avision] set_window: [61] background lines: 0
> [avision] set_window: sending command. Bytes: 70
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 70 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] sane_start: due to inquiry no calibration needed!
> [avision] send_gamma: table_raw_size: 256, table_size: 256
> [avision] send_gamma: values: 1, invert_table: 0
> [avision] send_gamma: brightness: 0.000000, contrast: 0.000000
> [avision] send_gamma: sending 256 bytes gamma table.
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 256 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] send_gamma: sending 256 bytes gamma table.
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 256 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] send_gamma: sending 256 bytes gamma table.
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 256 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] sane_start: starting thread
> [avision] reader_process:
> [avision] sane_get_parameters:
> [avision] reserve_unit:
> [avision] filling command to have a length of 10, was: 6
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] start_scan:
> [avision] start_scan: sending command. Bytes: 6
> [avision] filling command to have a length of 10, was: 6
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] dev->scsi_buffer_size / 2: 524288
> [avision] bytes_per_line: 3792, pixels_per_line: 1264
> [avision] lines_per_stripe: 32, lines_per_output: 32
> [avision] max_bytes_per_read: 1048576, stripe_size: 121344, out_size: 121344
> [avision] reader_process: total_size: 7948032
> [avision] reader_process: stripe filled: 0
> [avision] reader_process: processed_bytes: 0, total_size: 7948032
> [avision] reader_process: this_read: 60674
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 60674 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 37922 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 15170 bytes of data on
> endpoint 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] No data arrived.
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 60674 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 52770 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 30018 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 7266 bytes of data on
> endpoint 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] No data arrived.
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 60674 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 45090 bytes of data on
> endpoint 0x82
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 22338 bytes of data on
> endpoint 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] No data arrived.
> [avision] Max retry count reached: I/O error
> [avision] reader_process: read_data failed with status: 9
> [avision] reader_process: stripe filled: 60674
> [avision] reader_process: useful_bytes 60674
> [avision] reader_process: end of iteration
> [avision] reader_process: i/o loop finished
> [avision] release unit: type: 0
> [avision] filling command to have a length of 10, was: 6
> [avision] Timeouts: write: 30000, read: 30000, status: 10000
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] <== (bulk read) got: 0, status: 0
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] <== (bulk read) got: 0, status: 0
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 10 bytes of data on endpoint
> 0x02
> [avision] avision_usb_status: timeout 10000, 1 retries
> [avision] ==> (bulk read) going down ...
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> libusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> USB error: libusb/darwin.c usb_bulk_transfer: unknown error
> USB error: usb_bulk_read: An error occured during read (see messages above)
> libusb/darwin.c ep_to_pipeRef: Converting ep address to pipeRef.
> USB error: usb_clear_halt(ClearPipeStall): pipe is stalled
> [avision] <== (bulk read) got: 0, status: 0
> [avision] Max retry count reached: I/O error
> [avision] reader_process: release_unit failed
> [avision] reader_process: returning success
> [avision] sane_read: got 0 bytes, err: 60 Operation timed out
> [avision] do_eof:
> [avision] do_eof: returning 9
> scanimage: sane_read: Error during device I/O
> [avision] sane_cancel:
> [avision] do_cancel:
> [avision] sane_close:
> usb_os_close: 043d:00d3
> [avision] sane_exit:
>
>
>
>
>
> =========================================
> Output from scanimage -L with USB * Avision debug:
> =========================================
> ibusb/darwin.c usb_bulk_transfer: Transfering 1 bytes of data on endpoint
> 0x82
> [avision] <== (bulk read) got: 1, status: 0
> [avision] attach: raw data:
> [avision] [0] 00000110b 6o 6d 6x
> [avision] [1] 10000000b 200o 128d 80x
> [avision] [2] 00000010b 2o 2d 2x
> [avision] [3] 01000010b 102o 66d 42x
> [avision] [4] 01011011b 133o 91d 5bx
> [avision] [5] 00000000b 0o 0d 0x
> [avision] [6] 00000000b 0o 0d 0x
> [avision] [7] 00000000b 0o 0d 0x
> [avision] [8] 01001100b 114o 76d 4cx
> [avision] [9] 01000101b 105o 69d 45x
> [avision] [10] 01011000b 130o 88d 58x
> [avision] [11] 01001101b 115o 77d 4dx
> [avision] [12] 01000001b 101o 65d 41x
> [avision] [13] 01010010b 122o 82d 52x
> [avision] [14] 01001011b 113o 75d 4bx
> [avision] [15] 00100000b 40o 32d 20x
> [avision] [16] 01011000b 130o 88d 58x
> [avision] [17] 00110011b 63o 51d 33x
> [avision] [18] 00110100b 64o 52d 34x
> [avision] [19] 00110000b 60o 48d 30x
> [avision] [20] 00100000b 40o 32d 20x
> [avision] [21] 00100000b 40o 32d 20x
> [avision] [22] 00100000b 40o 32d 20x
> [avision] [23] 00100000b 40o 32d 20x
> [avision] [24] 00100000b 40o 32d 20x
> [avision] [25] 00100000b 40o 32d 20x
> [avision] [26] 00100000b 40o 32d 20x
> [avision] [27] 00100000b 40o 32d 20x
> [avision] [28] 00100000b 40o 32d 20x
> [avision] [29] 00100000b 40o 32d 20x
> [avision] [30] 00100000b 40o 32d 20x
> [avision] [31] 00100000b 40o 32d 20x
> [avision] [32] 00110000b 60o 48d 30x
> [avision] [33] 00101110b 56o 46d 2ex
> [avision] [34] 00110110b 66o 54d 36x
> [avision] [35] 00110000b 60o 48d 30x
> [avision] [36] 10100000b 240o 160d a0x
> [avision] [37] 00001100b 14o 12d cx
> [avision] [38] 00001100b 14o 12d cx
> [avision] [39] 10000111b 207o 135d 87x
> [avision] [40] 00000100b 4o 4d 4x
> [avision] [41] 10110000b 260o 176d b0x
> [avision] [42] 00000100b 4o 4d 4x
> [avision] [43] 10110000b 260o 176d b0x
> [avision] [44] 00000100b 4o 4d 4x
> [avision] [45] 10110000b 260o 176d b0x
> [avision] [46] 00000100b 4o 4d 4x
> [avision] [47] 10110000b 260o 176d b0x
> [avision] [48] 00000000b 0o 0d 0x
> [avision] [49] 00000000b 0o 0d 0x
> [avision] [50] 11001000b 310o 200d c8x
> [avision] [51] 00010101b 25o 21d 15x
> [avision] [52] 11000010b 302o 194d c2x
> [avision] [53] 00000000b 0o 0d 0x
> [avision] [54] 00010000b 20o 16d 10x
> [avision] [55] 00010000b 20o 16d 10x
> [avision] [56] 00010000b 20o 16d 10x
> [avision] [57] 00100000b 40o 32d 20x
> [avision] [58] 00100000b 40o 32d 20x
> [avision] [59] 00100000b 40o 32d 20x
> [avision] [60] 11000000b 300o 192d c0x
> [avision] [61] 10010000b 220o 144d 90x
> [avision] [62] 10100000b 240o 160d a0x
> [avision] [63] 00000001b 1o 1d 1x
> [avision] [64] 00000001b 1o 1d 1x
> [avision] [65] 00000001b 1o 1d 1x
> [avision] [66] 00000010b 2o 2d 2x
> [avision] [67] 00000011b 3o 3d 3x
> [avision] [68] 00000100b 4o 4d 4x
> [avision] [69] 00000101b 5o 5d 5x
> [avision] [70] 00000000b 0o 0d 0x
> [avision] [71] 00000000b 0o 0d 0x
> [avision] [72] 00000000b 0o 0d 0x
> [avision] [73] 00000000b 0o 0d 0x
> [avision] [74] 00000000b 0o 0d 0x
> [avision] [75] 00000000b 0o 0d 0x
> [avision] [76] 00000000b 0o 0d 0x
> [avision] [77] 00000000b 0o 0d 0x
> [avision] [78] 00000000b 0o 0d 0x
> [avision] [79] 00000000b 0o 0d 0x
> [avision] [80] 00000000b 0o 0d 0x
> [avision] [81] 00001010b 12o 10d ax
> [avision] [82] 00000000b 0o 0d 0x
> [avision] [83] 00010000b 20o 16d 10x
> [avision] [84] 01101000b 150o 104d 68x
> [avision] [85] 00001010b 12o 10d ax
> [avision] [86] 00000000b 0o 0d 0x
> [avision] [87] 00010000b 20o 16d 10x
> [avision] [88] 01101000b 150o 104d 68x
> [avision] [89] 00000100b 4o 4d 4x
> [avision] [90] 10110000b 260o 176d b0x
> [avision] [91] 10000001b 201o 129d 81x
> [avision] [92] 00000010b 2o 2d 2x
> [avision] [93] 10010000b 220o 144d 90x
> [avision] [94] 00000000b 0o 0d 0x
> [avision] [95] 00000000b 0o 0d 0x
> [avision] [96] 00000000b 0o 0d 0x
> [avision] [97] 00000000b 0o 0d 0x
> [avision] [98] 00000000b 0o 0d 0x
> [avision] [99] 00000000b 0o 0d 0x
> [avision] [100] 00000000b 0o 0d 0x
> [avision] [101] 00000000b 0o 0d 0x
> [avision] [102] 00000000b 0o 0d 0x
> [avision] [103] 00000000b 0o 0d 0x
> [avision] [104] 00000000b 0o 0d 0x
> [avision] [105] 00000000b 0o 0d 0x
> [avision] [106] 00000000b 0o 0d 0x
> [avision] [107] 00000000b 0o 0d 0x
> [avision] [108] 00000000b 0o 0d 0x
> [avision] [109] 00000000b 0o 0d 0x
> [avision] [110] 00000000b 0o 0d 0x
> [avision] [111] 00000000b 0o 0d 0x
> [avision] [112] 00000000b 0o 0d 0x
> [avision] [113] 00000000b 0o 0d 0x
> [avision] [114] 00000000b 0o 0d 0x
> [avision] [115] 00000000b 0o 0d 0x
> [avision] [116] 00000000b 0o 0d 0x
> [avision] [117] 00000000b 0o 0d 0x
> [avision] [118] 00000000b 0o 0d 0x
> [avision] [119] 00000000b 0o 0d 0x
> [avision] [120] 00000000b 0o 0d 0x
> [avision] [121] 00000000b 0o 0d 0x
> [avision] [122] 00000000b 0o 0d 0x
> [avision] [123] 00000000b 0o 0d 0x
> [avision] [124] 00000000b 0o 0d 0x
> [avision] [125] 00000000b 0o 0d 0x
> [avision] [126] 00000000b 0o 0d 0x
> [avision] [127] 00000000b 0o 0d 0x
> [avision] [128] 00000000b 0o 0d 0x
> [avision] [129] 00000000b 0o 0d 0x
> [avision] [130] 00000000b 0o 0d 0x
> [avision] [131] 00000000b 0o 0d 0x
> [avision] [132] 00000000b 0o 0d 0x
> [avision] [133] 00000000b 0o 0d 0x
> [avision] [134] 00000000b 0o 0d 0x
> [avision] [135] 00000000b 0o 0d 0x
> [avision] attach: [8-15] Vendor id.: 'LEXMARK '
> [avision] attach: [16-31] Product id.: 'X340 '
> [avision] attach: [32-35] Product rev.: '0.60'
> [avision] attach: [36] Bitfield: ADF 3-pass color RGB color plane
> [avision] attach: [37] Optical res.: 1200 dpi
> [avision] attach: [38] Maximum res.: 1200 dpi
> [avision] attach: [39] Bitfield1: TRANS NEW_PROTOCOL AVISION
> [avision] attach: [40-41] X res. in gray: 1200 dpi
> [avision] attach: [42-43] Y res. in gray: 1200 dpi
> [avision] attach: [44-45] X res. in color: 1200 dpi
> [avision] attach: [46-47] Y res. in color: 1200 dpi
> [avision] attach: [48-49] USB max read: 0
> [avision] attach: [50] ESA1: LIGHT_CONTROL BUTTON_CONTROL NEED_SW_GAMMA
> [avision] attach: [51] ESA2: SUPPORTS_QUALITY_SPEED_CAL HAS_PUSH_BUTTON
> ADF_MIRRORS_IMAGE
> [avision] attach: [52] ESA3: GRAY_WHITE SUPPORTS_GAIN_CONTROL
> POWER_SAVING_TIMER
> [avision] attach: [53] line difference (software color pack): 0
> [avision] attach: [54] color mode pixel boundary: 16
> [avision] attach: [55] gray mode pixel boundary: 16
> [avision] attach: [56] 4bit gray mode pixel boundary: 16
> [avision] attach: [57] lineart mode pixel boundary: 32
> [avision] attach: [58] halftone mode pixel boundary: 32
> [avision] attach: [59] error-diffusion mode pixel boundary: 32
> [avision] attach: [60] channels per pixel: 1 3
> [avision] attach: [61] bits per channel: 1 8
> [avision] attach: [62] scanner type: Flatbed Flatbed (ADF)
> [avision] attach: [75-76] Max shading target : 0
> [avision] attach: [77-78] Max X of transparency: 0 dots * base_dpi
> [avision] attach: [79-80] Max Y of transparency: 0 dots * base_dpi
> [avision] attach: [81-82] Max X of flatbed: 2560 dots * base_dpi
> [avision] attach: [83-84] Max Y of flatbed: 4200 dots * base_dpi
> [avision] attach: [85-86] Max X of ADF: 2560 dots * base_dpi
> [avision] attach: [87-88] Max Y of ADF: 4200 dots * base_dpi
> [avision] attach: [89-90] Res. in Ex. mode: 1200 dpi
> [avision] attach: [91] ASIC: 129
> [avision] attach: [92] Buttons: 2
> [avision] attach: [93] ESA4: SUPPORTS_ACCESSORIES_DETECT
> SUPPORTS_FLASH_UPDATE
> [avision] attach: [94] ESA5:
> [avision] attach: [95] ESA6:
> [avision] attach: [128] ESA7:
> [avision] attach: [129] YCbCr:
> [avision] attach: optical resolution set to: 1200 dpi
> [avision] attach: max resolution set to: 1200 dpi
> [avision] attach: max channels per pixel: 3, max bits per channel: 8
> [avision] attach: x/y-range for mode 0 is valid!
> [avision] attach: Mode 0 range is now: 216.846667 x 355.600000 mm.
> [avision] attach: x/y-range for mode 1 is invalid! Using a default.
> [avision] attach: Mode 1 range is now: 215.900000 x 299.720000 mm.
> [avision] attach: x/y-range for mode 2 is valid!
> [avision] attach: Mode 2 range is now: 216.846667 x 355.600000 mm.
> usb_os_close: 043d:00d3
> [avision] sane_init: Trying to find USB device 638 a16 ...
> xxx (devices removed) xxx
> [avision] sane_init: Trying to find USB device 482 335 ...
> [avision] sane_get_devices:
> [avision] sane_exit:
> device `avision:libusb:005:006-043d-00d3-00-00' is a Lexmark X340 flatbed
> scanner
>
>
>
>
>
>
> =========================================
> Output of sane-find-scanner -v -v
> =========================================
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 769 0
> 0x7fff5fbff6b0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 769 0
> 0x100104d80 44 1000
> usb_os_close: 043d:00d3
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 770 0
> 0x7fff5fbff6b0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 770 0
> 0x100104ea0 26 1000
> usb_os_close: 043d:00d3
>
> <device descriptor of 0x043d/0x00d3 at 005:006-043d-00d3-00-00 (Lexmark
> International Lexmark X340)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x043D
> idProduct 0x00D3
> bcdDevice 1.00
> iManufacturer 1 (Lexmark International)
> iProduct 2 (Lexmark X340)
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 771 0
> 0x7fff5fbff6d0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 771 0
> 0x100104db0 16 1000
> usb_os_close: 043d:00d3
> iSerialNumber 3 (68029XT)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 80
> bNumInterfaces 3
> bConfigurationValue 1
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 772 0
> 0x7fff5fbff6d0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 772 0
> 0x100104e00 42 1000
> usb_os_close: 043d:00d3
> iConfiguration 4 (Default Congurataion)
> bmAttributes 192 (Self-powered)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 255
> bInterfaceSubClass 255
> bInterfaceProtocol 255
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 774 0
> 0x7fff5fbff6d0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 774 0
> 0x100104db0 36 1000
> usb_os_close: 043d:00d3
> iInterface 6 (Scanner Interface)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 10 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 10 ms
> bRefresh 0
> bSynchAddress 0
> <interface 1>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 7
> bInterfaceSubClass 1
> bInterfaceProtocol 2
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 773 0
> 0x7fff5fbff6d0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 773 0
> 0x100104de0 36 1000
> usb_os_close: 043d:00d3
> iInterface 5 (Printer Interface)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 (out 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 10 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 10 ms
> bRefresh 0
> bSynchAddress 0
> <interface 2>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> usb_os_open: 043d:00d3
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 775 0
> 0x7fff5fbff6d0 2 1000
> libusb/darwin.c usb_control_msg (device: 006-043d-00d3-00-00): 128 6 775 0
> 0x100104e70 28 1000
> usb_os_close: 043d:00d3
> iInterface 7 (Hid Interface)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 (in 0x04)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 4
> bInterval 16 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bcdUSB = 0x200)
> checking for GT-8911 ...
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bcdUSB = 0x200)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL84x ...
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822 ...
> this is not a RTS8822 (bNumEndpoints = 2)
> checking for rts8858c ...
> this is not a rts8858c (bcdUSB = 0x200)
> checking for SQ113 ...
> this is not a SQ113 (bNumEndpoints = 2)
> checking for HP5550/5590/7650 chipset ...
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
> checking for rts8801/rts8891 ...
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.1.0-cvs)>
>
> found USB scanner (vendor=0x043d [Lexmark International], product=0x00d3
> [Lexmark X340]) at libusb:005:006-043d-00d3-00-00
> # Your USB scanner was (probably) detected. It may or may not be supported
> by
> # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
>
> # You may want to run this program as root to find all devices. Once you
> # found the scanner devices, be sure to adjust access permissions as
> # necessary.
> done
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list