[sane-devel] Sane Error

[David Solomon]

The backend doesn't work directly either.  I am able to see it communicate with the scanner, it goes into a busy state and then gets the I/O error immediately after.

I am going to try to compile 1.0.19 in cygwin and see if that has any different results.

The test interface does work.

David

-----Original Message-----
From: m. allan noah [mailto:kitno455 at gmail.com]
Sent: Thursday, June 25, 2009 7:19 PM
To: David Solomon
Cc: sane-devel at lists.alioth.debian.org
Subject: Re: [sane-devel] Sane Error

1. does avision backend work directly?
2. please join the list with address.

allan

On Thu, Jun 25, 2009 at 6:43 PM, David Solomon<dsolomon at rx30.com> wrote:
> I am running scanimage -d net:localhost:avision > test.pnm with a saned -d server running.
>
> I haven't tried any of the test backends.
>
> David
> ________________________________________
> From: m. allan noah [kitno455 at gmail.com]
> Sent: Thursday, June 25, 2009 6:14 PM
> To: David Solomon
> Cc: sane-devel at lists.alioth.debian.org
> Subject: Re: [sane-devel] Sane Error
>
> which part is running cygwin- the client or the saned server, or both?
> Does it happen with the test or pnm backends?
>
> allan
>
> On Thu, Jun 25, 2009 at 5:03 PM, David Solomon<dsolomon at rx30.com> wrote:
>> I am trying to compile sane-backends using cygwin for Win32.  I am getting
>> the following error in saned when trying to get the scan:
>>
>>
>>
>> [[avision] avision] Timeouts: write: 30000, read: sane_set_io_mode:
>>
>> [, status: dll] sane_get_select_fd(handle=10000
>>
>> 10015d18,fdp=0x22a52c)
>>
>> [avision] try to write cmd, count: 10.
>>
>> [avision] sane_get_select_fd:
>>
>> sanei_usb] sanei_usb_write_bulk: trying to write 10 bytes[
>>
>> ] [sane_get_parameters(handle=sanei_usb0x] 10015d18000 16 00 00 00 00 00 00
>> 00
>>
>> 0 00                   ..........      ,params=0x
>>
>> )2a414
>>
>> sanei_usb[] avisionsanei_usb_write_bulk: write failed: ]
>> sane_get_parameters:No
>>
>> such file or directory
>>
>>
>>
>> [avision] wrote 0 bytes
>>
>> [avision] === Got error 9 trying to write, wrote: 0. ===
>>
>> [avision] try to read status to clear the FIFO
>>
>> [avision] avision_usb_status: timeout 500, 1 retries
>>
>> [avision] ==> (bulk read) going down ...
>>
>>
>>
>> David
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
>>
>
>
>
> --
> "The truth is an offense, but not a sin"
>



--
"The truth is an offense, but not a sin"