[sane-devel] Canon LIDE 650U not recognized except in lsusb?
m. allan noah
kitno455 at gmail.com
Mon Jun 29 16:27:07 UTC 2009
what version of sane-backends, and what version of libusb?
allan
On Mon, Jun 29, 2009 at 12:21 PM, Michael Ole Olsen<gnu at gmx.net> wrote:
> xsane-0.99 (debian lenny, with libsane also installed)
>
> i think the canon n650u lide scanner uses the plustek backend if it is of any use?
>
> if i remove my webcam i just get 'no devices detected' but lsusb lists it.
>
> /Michael Ole Olsen
>
>
> On Mon, 29 Jun 2009, Michael Ole Olsen wrote:
>
>> My USB Canon CanoScan LIDE N650U is not getting recognized, except in lsusb.
>>
>> For some reason my scanner stopped working after i changed system and kernel
>>
>> I cannot use a newer kernel than this 2.6.22.1 or my ati drivers will
>> not work. the kernel is custom compiled from kernel.org and has ehci,uhci,ohci
>> compiled in as modules and also usb devfs enabled
>>
>> mws:/home/michael# mount -t usbfs
>> procbususb on /proc/bus/usb type usbfs (rw)
>>
>> when starting xsane as normal user in group 'scanner' it just opens /dev/video0 instead , which my my webcam
>> I tried removing the webcam from the usb hub without luck.
>>
>> Nothing in dmesg:
>> udevd version 125 started
>> usb 1-4.2: new full speed USB device using ehci_hcd and address 36
>> usb 1-4.2: configuration #1 chosen from 1 choice
>> usb 1-4.2: USB disconnect, address 36
>> usb 1-4.2: new full speed USB device using ehci_hcd and address 37
>> usb 1-4.2: configuration #1 chosen from 1 choice
>> usb 1-4.2: USB disconnect, address 37
>> usb 1-4.2: new full speed USB device using ehci_hcd and address 38
>> usb 1-4.2: configuration #1 chosen from 1 choice
>>
>>
>> I have tried opening the device files that udev makes (with xsane /dev/usbdev<xxxx>)
>> but i just get invalid argument, here is udev debug output (directly after insert of usbcable into scanner):
>>
>> [26462] msg_queue_insert: seq 2767 queued, 'add' 'usb'
>> [26462] udev_event_run: seq 2767 forked, pid [27019], 'add' 'usb', 0 seconds old
>> [26462] msg_queue_insert: seq 2768 queued, 'add' 'usb_endpoint'
>> [26462] msg_queue_insert: seq 2769 queued, 'add' 'usb'
>> [26462] msg_queue_insert: seq 2770 queued, 'add' 'usb_endpoint'
>> [26462] msg_queue_insert: seq 2771 queued, 'add' 'usb_endpoint'
>> [26462] msg_queue_insert: seq 2772 queued, 'add' 'usb_endpoint'
>> [27019] run_program: 'check-ptp-camera 06/01/01'
>> [27019] run_program: '/lib/udev/check-ptp-camera' returned with status 1
>> [27019] udev_rules_get_name: rule applied, '1-4.2' becomes 'bus/usb/001/038'
>> [27019] match_rule: set ENV 'libsane_matched=yes'
>> [27019] udev_db_get_device: no db file to read /dev/.udev/db/\x2fdevices\x2fpci0000:00\x2f0000:00:1d.7\x2fusb1\x2f1-4\x2f1-4.2: No such file or directory
>> [27019] udev_node_add: creating device node '/dev/bus/usb/001/038', major=189, minor=37, mode=0664, uid=0, gid=105
>> [27019] udev_node_mknod: mknod(/dev/bus/usb/001/038, 020664, (189,37))
>> [27019] udev_node_mknod: chmod(/dev/bus/usb/001/038, 020664)
>> [27019] udev_node_mknod: chown(/dev/bus/usb/001/038, 0, 105)
>> [27019] name_index: creating index: '/dev/.udev/names/bus\x2fusb\x2f001\x2f038/\x2fdevices\x2fpci0000:00\x2f0000:00:1d.7\x2fusb1\x2f1-4\x2f1-4.2'
>> [27019] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27019] run_program: '/bin/sh -c 'test -e /sys//devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/power/level && echo on > /sys//devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.2/power/level''
>> [27019] run_program: '/bin/sh' returned with status 1
>> [27019] udev_event_run: seq 2767 finished with -1
>> [26462] udev_done: seq 2767, pid [27019] exit with 1, 0 seconds old
>> [26462] udev_event_run: seq 2768 forked, pid [27022], 'add' 'usb_endpoint', 0 seconds old
>> [26462] udev_event_run: seq 2769 forked, pid [27023], 'add' 'usb', 0 seconds old
>> [27022] udev_rules_get_name: no node name set, will use kernel name 'usbdev1.38_ep00'
>> [27023] run_program: '/sbin/modprobe --use-blacklist usb:v04A9p2206d0100dc00dsc00dp00icFFisc00ipFF'
>> [27022] udev_db_get_device: no db file to read /dev/.udev/db/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep00: No such file or directory
>> [27022] udev_node_add: creating device node '/dev/usbdev1.38_ep00', major=254, minor=21, mode=0660, uid=0, gid=0
>> [27022] udev_node_mknod: mknod(/dev/usbdev1.38_ep00, 020660, (254,21))
>> [27022] udev_node_mknod: chmod(/dev/usbdev1.38_ep00, 020660)
>> [27022] udev_node_mknod: chown(/dev/usbdev1.38_ep00, 0, 0)
>> [27022] name_index: creating index: '/dev/.udev/names/usbdev1.38_ep00/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep00'
>> [27022] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27022] udev_event_run: seq 2768 finished with 0
>> [26462] udev_done: seq 2768, pid [27022] exit with 0, 0 seconds old
>> [27023] run_program: '/sbin/modprobe' (stderr) 'FATAL: Module usb:v04A9p2206d0100dc00dsc00dp00icFFisc00ipFF not found.'
>> [27023] run_program: '/sbin/modprobe' returned with status 1
>> [27023] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27023] udev_event_run: seq 2769 finished with -1
>> [26462] udev_done: seq 2769, pid [27023] exit with 1, 0 seconds old
>> [26462] udev_event_run: seq 2770 forked, pid [27025], 'add' 'usb_endpoint', 0 seconds old
>> [26462] udev_event_run: seq 2771 forked, pid [27026], 'add' 'usb_endpoint', 0 seconds old
>> [26462] udev_event_run: seq 2772 forked, pid [27027], 'add' 'usb_endpoint', 0 seconds old
>> [27025] udev_rules_get_name: no node name set, will use kernel name 'usbdev1.38_ep81'
>> [27025] udev_db_get_device: no db file to read /dev/.udev/db/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep81: No such file or directory
>> [27025] udev_node_add: creating device node '/dev/usbdev1.38_ep81', major=254, minor=22, mode=0660, uid=0, gid=0
>> [27025] udev_node_mknod: mknod(/dev/usbdev1.38_ep81, 020660, (254,22))
>> [27025] udev_node_mknod: chmod(/dev/usbdev1.38_ep81, 020660)
>> [27025] udev_node_mknod: chown(/dev/usbdev1.38_ep81, 0, 0)
>> [27025] name_index: creating index: '/dev/.udev/names/usbdev1.38_ep81/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep81'
>> [27025] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27025] udev_event_run: seq 2770 finished with 0
>> [26462] udev_done: seq 2770, pid [27025] exit with 0, 0 seconds old
>> [27026] udev_rules_get_name: no node name set, will use kernel name 'usbdev1.38_ep82'
>> [27026] udev_db_get_device: no db file to read /dev/.udev/db/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep82: No such file or directory
>> [27026] udev_node_add: creating device node '/dev/usbdev1.38_ep82', major=254, minor=23, mode=0660, uid=0, gid=0
>> [27026] udev_node_mknod: mknod(/dev/usbdev1.38_ep82, 020660, (254,23))
>> [27026] udev_node_mknod: chmod(/dev/usbdev1.38_ep82, 020660)
>> [27026] udev_node_mknod: chown(/dev/usbdev1.38_ep82, 0, 0)
>> [27026] name_index: creating index: '/dev/.udev/names/usbdev1.38_ep82/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep82'
>> [27026] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27026] udev_event_run: seq 2771 finished with 0
>> [27027] udev_rules_get_name: no node name set, will use kernel name 'usbdev1.38_ep03'
>> [27027] udev_db_get_device: no db file to read /dev/.udev/db/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep03: No such file or directory
>> [27027] udev_node_add: creating device node '/dev/usbdev1.38_ep03', major=254, minor=24, mode=0660, uid=0, gid=0
>> [27027] udev_node_mknod: mknod(/dev/usbdev1.38_ep03, 020660, (254,24))
>> [27027] udev_node_mknod: chmod(/dev/usbdev1.38_ep03, 020660)
>> [27027] udev_node_mknod: chown(/dev/usbdev1.38_ep03, 0, 0)
>> [27027] name_index: creating index: '/dev/.udev/names/usbdev1.38_ep03/\x2fclass\x2fusb_endpoint\x2fusbdev1.38_ep03'
>> [27027] pass_env_to_socket: passed -1 bytes to socket '@/org/kernel/udev/monitor',
>> [27027] udev_event_run: seq 2772 finished with 0
>> [26462] udev_done: seq 2771, pid [27026] exit with 0, 0 seconds old
>> [26462] udev_done: seq 2772, pid [27027] exit with 0, 0 seconds old
>>
>>
>> michael at mws:~% lsmod
>> Module Size Used by
>> pwc 80740 0
>> usbserial 29496 0
>> sg 22680 0
>> xt_tcpudp 6784 8
>> iptable_mangle 6144 1
>> ipt_TOS 5760 8
>> ip_tables 13380 1 iptable_mangle
>> x_tables 14596 3 xt_tcpudp,ipt_TOS,ip_tables
>> fglrx 2053828 29
>> p4_clockmod 8452 1
>> speedstep_lib 8832 1 p4_clockmod
>> w83627hf 24340 0
>> hwmon_vid 6400 1 w83627hf
>> hwmon 6404 1 w83627hf
>> snd_rtctimer 6560 0
>> snd_emu10k1_synth 9728 0
>> snd_emux_synth 31616 1 snd_emu10k1_synth
>> snd_seq_virmidi 9088 1 snd_emux_synth
>> snd_seq_midi_emul 8960 1 snd_emux_synth
>> snd_emu10k1 119044 4 snd_emu10k1_synth
>> snd_usb_audio 73088 0
>> snd_ac97_codec 90400 1 snd_emu10k1
>> snd_pcm_oss 38400 0
>> ac97_bus 6016 1 snd_ac97_codec
>> snd_mixer_oss 17024 1 snd_pcm_oss
>> snd_util_mem 7296 2 snd_emux_synth,snd_emu10k1
>> snd_pcm 64644 5 snd_emu10k1,snd_usb_audio,snd_ac97_codec,snd_pcm_oss
>> snd_seq_oss 29972 0
>> snd_page_alloc 10888 2 snd_emu10k1,snd_pcm
>> snd_usb_lib 16640 1 snd_usb_audio
>> snd_seq_midi 9984 0
>> snd_seq_midi_event 9600 3 snd_seq_virmidi,snd_seq_oss,snd_seq_midi
>> snd_seq 44852 8 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
>> snd_rawmidi 21120 4 snd_seq_virmidi,snd_emu10k1,snd_usb_lib,snd_seq_midi
>> snd_timer 20484 4 snd_rtctimer,snd_emu10k1,snd_pcm,snd_seq
>> snd_seq_device 9868 7 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi
>> compat_ioctl32 5248 1 pwc
>> snd_hwdep 10244 3 snd_emux_synth,snd_emu10k1,snd_usb_audio
>> videodev 28032 1 pwc
>> v4l2_common 18432 1 videodev
>> v4l1_compat 15492 1 videodev
>> snd 43444 19 snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_usb_audio,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_seq,snd_rawmidi,snd_timer,snd_seq_device,snd_hwdep
>>
>>
>> Lsusb finds the scanner without problems..
>>
>> michael at mws:~% lsusb
>> Bus 001 Device 034: ID 05ac:120a Apple, Inc. iPod Nano
>> Bus 001 Device 027: ID 04a9:2206 Canon, Inc. CanoScan N650U/N656U
>> Bus 001 Device 026: ID 058f:6390 Alcor Micro Corp. USB 2.0-IDE bridge
>> Bus 001 Device 022: ID 0409:0058 NEC Corp. HighSpeed Hub
>> Bus 001 Device 001: ID 0000:0000
>> Bus 005 Device 001: ID 0000:0000
>> Bus 004 Device 001: ID 0000:0000
>> Bus 003 Device 004: ID 0471:0311 Philips PCVC740K ToUcam Pro [pwc]
>> Bus 003 Device 001: ID 0000:0000
>> Bus 002 Device 004: ID 046d:c01e Logitech, Inc. MX518 Optical Mouse
>> Bus 002 Device 001: ID 0000:0000
>>
>> I do have usbdevfs in proc in my kernel:
>>
>> mws:/home/michael# mount
>> cpq:/diskless/mws on / type nfs (rw,hard,intr,nolock,rsize=4096,wsize=4096,addr=192.168.0.1)
>> tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
>> proc on /proc type proc (rw,noexec,nosuid,nodev)
>> sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
>> procbususb on /proc/bus/usb type usbfs (rw)
>> udev on /dev type tmpfs (rw,mode=0755)
>> tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
>> devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
>> tmpfs on /tmp type tmpfs (rw,size=1G)
>> cpq:/home/diskless/tftp/kernels/src on /usr/src type nfs (rw,addr=192.168.0.1)
>> cpq:/home/michael/.private/latex on /latex type nfs (rw,addr=192.168.0.1)
>> cpq:/home/michael/.private/music on /nfs/music type nfs (rw,addr=192.168.0.1)
>> /usr/src/linux-2.6.22.1 on /usr/src/linux type bind (rw,bind)
>> mfs:/bigdaddy on /nfs/bigdaddy type nfs (rw,user=root,nosuid,nodev,addr=192.168.0.25)
>> mfs:/torrents on /nfs/torrents type nfs (rw,user=root,nosuid,nodev,addr=192.168.0.25)
>> mfs:/crypt/pictures on /nfs/pictures type nfs (rw,user=root,nosuid,nodev,addr=192.168.0.25)
>> mfs:/crypt/scan on /nfs/scan type nfs (rw,user=root,nosuid,nodev,addr=192.168.0.25)
>> cpq:/home/michael/.private on /nfs/private type nfs (rw,addr=192.168.0.1)
>>
>> mws:/home/michael# cat /proc/filesystems
>> nodev sysfs
>> nodev rootfs
>> nodev bdev
>> nodev proc
>> nodev sockfs
>> nodev usbfs
>> nodev pipefs
>> nodev anon_inodefs
>> nodev futexfs
>> nodev tmpfs
>> nodev inotifyfs
>> nodev devpts
>> nodev ramfs
>> nodev hugetlbfs
>> msdos
>> vfat
>> iso9660
>> nodev nfs
>> nodev autofs
>> nodev mqueue
>> nodev oprofilefs
>> nodev rpc_pipefs
>>
>>
>> Any idea what I am missing , I thought usb scanneres were using libusb nowadays
>> so it should be autodetection ?:)
>>
>> Best Regards
>> Michael Ole Olsen
>
>
>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to sane-devel-request at lists.alioth.debian.org
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.9 (GNU/Linux)
>
> iQIcBAEBAgAGBQJKSOoFAAoJECXlragqp/ZIJY0P/1mEYzd5uiiFEDZjBF2439/f
> 7DeMyweE4cyJMBk7tqAQM8Nf5djxHYoac8mIaWOYY4h2LzUiCKZR/4Lgcbw5oJdc
> NP0uaP0MuTWadNUzrl6jh/7MwpSwrB/Bv+T5Qgk9VFvziwgqqQgd4K3Yc/Dig1j6
> 823+E6KX0evWeKKpFKQoNy9WPolTUONxmo5B7z/0G92PDpXE/fyMg4/dfeT/EB2C
> mqPUhjM9AzjK02T+t7/Q1gpr+zlilr0IJQcCOu4FPVl5duO/InVKIOAg8Ecjcwe9
> EsF9DqVM1C4F/gTTvatJJB1kaiW0HD9+RFFTKSwHK+vc9aeV2I2TyFziw6hD+J3G
> 9xSkMvupdtGHFlukhxlncw0apN6KbMLaJfVzhJXpY7gY2xHIM7NVzzUUdJuRWnxj
> 3C3DS7ogTjUQaxNrf7KOeUvYXP0nD5Cx96g8s5Hp5Qx6omV+oU44kxJaes5mnSKe
> cedg4VAZ7aLQdXeoMACqd1GuVC8oII7xWtROfLoXHJIm6L1fYpOCqcJoZ8soKqHd
> oE1vKhg2IB0LAc0pk/DZiUcQDAL2RWVK5ftwWP1LSts2SMtTK/oIByfUeMq934Rl
> aOV+8Nz9AmHwj+Ss9TUi1xIe27ffLEYi2cKPjsG7UFitvr/JVlzGsJHJXf5y1ViB
> xfwu9ifm7RdruxSwnFKZ
> =GYAR
> -----END PGP SIGNATURE-----
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list