[sane-devel] Problem with HP Color LaserJet CM1015
m. allan noah
kitno455 at gmail.com
Fri May 22 15:14:03 UTC 2009
2009/5/22 Jérôme Avond <j.avond at axolys.fr>:
> I have problems with HP Color LaserJet CM1015, this is what i had
> # sane-find-scanner
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
> # No SCSI scanners found. If you expected something different, make
> sure that
> # you have loaded a kernel SCSI driver for your SCSI adapter.
> # Also you need support for SCSI Generic (sg) in your operating system.
> # If using Linux, try "modprobe sg".
> found USB scanner (vendor=0x03f0 [Hewlett-Packard], product=0x4217 [HP
> Color LaserJet CM1015]) at libusb:001:004
> # Your USB scanner was (probably) detected. It may or may not be
> supported by
> # SANE. Try scanimage -L and read the backend's manpage.
> # Not checking for parallel port scanners.
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
> # scanimage -L
> No scanners were identified. If you were expecting something different,
> check that the scanner is plugged in, turned on and detected by the
> sane-find-scanner tool (if appropriate). Please read the documentation
> which came with this software (README, FAQ, manpages).
It is not supported. You might see if the backend from
hplipopensource.com supports it. It might work with our hpljm1005
backend, but you would need to add its usb ID's to the source and
recompile to test.
"The truth is an offense, but not a sin"
More information about the sane-devel