[sane-devel] Canon imageCLASS MF4370dn

Adrian Sandor aditsu at yahoo.com
Sun Oct 18 02:22:40 UTC 2009

Oh, in order to be able to use it on the network, I should connect it to USB first? That's funny.

Well, here's some information from lsusb:

Bus 002 Device 006: ID 04a9:26ec Canon, Inc.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x04a9 Canon, Inc.
  idProduct          0x26ec
  bcdDevice            1.00
  iManufacturer           1 Canon Inc.
  iProduct                2 MF4360-4390
  iSerial                 3 SJF980221406D
  bNumConfigurations      1

Let me know if you need more details.


From: Nicolas Martin <nicolas0martin at gmail.com>
To: Adrian Sandor <aditsu at yahoo.com>
Cc: sane-devel at lists.alioth.debian.org
Sent: Sun, October 18, 2009 3:45:16 AM
Subject: Re: [sane-devel] Canon imageCLASS MF4370dn

This model is not supported bu Sane 1.0.20, but currently working on
adding the ImageClass MF4380dn to the pixma backend, and should be
available soon in Sane git. 

In the meantime, could you supply the usb vid:pid of this model ? 
You can read it with a 

$ /usr/sbin/lsusb


Le samedi 17 octobre 2009 à 10:58 -0700, Adrian Sandor a écrit :
> Hi, I've just bought <subject>, how can I set it up for scanning over
> the network?
> I'm using sane-backends 1.0.20, and I added bjnp:// in
> pixma.conf (that's the ip address of the device), but scanimage -L
> says:
> [pixma] udp_command: no data received (recv): Connection
> refused[pixma] udp_command: no data received (recv): Connection
> refused[pixma] udp_command: no data received (recv): Connection
> refused[pixma] Cannot read scanner make & model:
> Also, if I run scanimage as root, it dies with a segmentation fault.
> Thanks
> Adrian
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>              to sane-devel-request at lists.alioth.debian.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20091017/a059ea07/attachment-0001.htm>

More information about the sane-devel mailing list