[sane-devel] scaner on HP LaserJet M1005 MFP

Wed Apr 7 12:21:01 UTC 2010

perhaps related to kernel usb suspend settings to save power? What
kernel version is this? Perhaps you can try to disable power
management for this device (use the 'on' setting):

http://www.lesswatts.org/projects/devices-power-management/usb.php

allan

On Wed, Apr 7, 2010 at 6:30 AM, viktor vraniak <tyctor at post.cz> wrote:
>
> hi all
>
> i have device HP LaserJet M1005 MFP, scanning is working with "hpljm1005"
> backend.
> but there is one issue: utility "scanimage" works only every second run
>
> in kernel log i see:
> [40719.182679] usb 1-5: default language 0x0409
> [40719.183156] usb 1-5: udev 12, busnum 1, minor = 11
> [40719.183162] usb 1-5: New USB device found, idVendor=03f0, idProduct=3b17
> [40719.183168] usb 1-5: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [40719.183174] usb 1-5: Product: HP LaserJet M1005
> [40719.183179] usb 1-5: Manufacturer: Hewlett-Packard
> [40719.183183] usb 1-5: SerialNumber: KJ15H0P
> [40719.183328] usb 1-5: uevent
> [40719.183361] usb 1-5: usb_probe_device
> [40719.183368] usb 1-5: configuration #1 chosen from 1 choice
> [40719.183438] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
> [40719.183472] usb 1-5:1.0: uevent
> [40719.183574] usb 1-5: adding 1-5:1.1 (config #1, interface 1)
> [40719.183606] usb 1-5:1.1: uevent
> [40719.183637] usblp 1-5:1.1: usb_probe_interface
> [40719.183643] usblp 1-5:1.1: usb_probe_interface - got id
> [40719.183931] drivers/usb/core/file.c: looking for a minor, starting at 0
> [40719.183990] usblp0: USB Bidirectional printer dev 12 if 1 alt 0 proto 2 vid
> 0x03F0 pid 0x3B17
> [40719.184014] drivers/usb/core/inode.c: creating file '012'
> [40719.192140] usb 1-5: uevent
> [40719.192140] usb 1-5: uevent
> [40873.431475] usb usb4: usb auto-resume
> [40873.431485] usb usb4: wakeup_rh
> [40873.463014] hub 4-0:1.0: hub_resume
> [40873.463048] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40873.463168] usb usb2: usb auto-resume
> [40873.463172] usb usb2: wakeup_rh
> [40873.495011] hub 2-0:1.0: hub_resume
> [40873.495034] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40873.495117] usb usb5: usb auto-resume
> [40873.495120] usb usb5: wakeup_rh
> [40873.527011] hub 5-0:1.0: hub_resume
> [40873.527034] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40873.527492] usb 1-5: usbfs: interface 1 claimed by usblp while 'scanimage'
> sets config #1
> [40874.500020] usb usb4: suspend_rh (auto-stop)
> [40874.500040] usb usb2: suspend_rh (auto-stop)
> [40874.750017] usb usb5: suspend_rh (auto-stop)
> [40876.000085] hub 4-0:1.0: hub_suspend
> [40876.000098] usb usb4: bus auto-suspend
> [40876.000102] usb usb4: suspend_rh
> [40876.000118] hub 2-0:1.0: hub_suspend
> [40876.000122] usb usb2: bus auto-suspend
> [40876.000125] usb usb2: suspend_rh
> [40876.000139] hub 5-0:1.0: hub_suspend
> [40876.000143] usb usb5: bus auto-suspend
> [40876.000146] usb usb5: suspend_rh
>
>
> now i run scanimage, and scan one page, it runs OK.
> so i run scanimage for second page and i see this in dmesg output:
>
>
> [40940.901975] usb usb4: usb auto-resume
> [40940.901985] usb usb4: wakeup_rh
> [40940.933014] hub 4-0:1.0: hub_resume
> [40940.933048] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40940.933164] usb usb2: usb auto-resume
> [40940.933169] usb usb2: wakeup_rh
> [40940.965036] hub 2-0:1.0: hub_resume
> [40940.965059] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40940.965144] usb usb5: usb auto-resume
> [40940.965147] usb usb5: wakeup_rh
> [40940.997011] hub 5-0:1.0: hub_resume
> [40940.997034] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [40940.997495] usb 1-5: usbfs: interface 1 claimed by usblp while 'scanimage'
> sets config #1
> [40942.000048] usb usb4: suspend_rh (auto-stop)
> [40942.000069] usb usb2: suspend_rh (auto-stop)
> [40942.000087] usb usb5: suspend_rh (auto-stop)
> [40943.000024] hub 4-0:1.0: hub_suspend
> [40943.000035] usb usb4: bus auto-suspend
> [40943.000038] usb usb4: suspend_rh
> [40943.000053] hub 2-0:1.0: hub_suspend
> [40943.000058] usb usb2: bus auto-suspend
> [40943.000061] usb usb2: suspend_rh
> [40943.000074] hub 5-0:1.0: hub_suspend
> [40943.000078] usb usb5: bus auto-suspend
> [40943.000081] usb usb5: suspend_rh
> [40950.191847] ehci_hcd 0000:00:10.4: detected XactErr len 0/32 retry 1
> [40950.191878] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0020
> [40950.191891] ehci_hcd 0000:00:10.4: GetStatus port 5 status 001002 POWER
> sig=se0 CSC
> [40950.191901] hub 1-0:1.0: port 5, status 0100, change 0001, 12 Mb/s
> [40950.191906] usb 1-5: USB disconnect, address 12
> [40950.191909] usb 1-5: unregistering device
> [40950.191913] usb 1-5: usb_disable_device nuking all URBs
> [40950.191924] ehci_hcd 0000:00:10.4: shutdown urb f4231500 ep1in-bulk
> [40950.191972] usb 1-5: unregistering interface 1-5:1.0
> [40950.192140] usb 1-5:1.0: uevent
> [40950.192182] usb 1-5: unregistering interface 1-5:1.1
> [40950.192285] drivers/usb/core/file.c: removing 0 minor
> [40950.192393] usblp0: removed
> [40950.192406] usb 1-5:1.1: uevent
> [40950.192629] usb 1-5: uevent
> [40950.297020] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
> 0x100
> [40951.343744] hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0020
> [40951.343762] ehci_hcd 0000:00:10.4: GetStatus port 5 status 001803 POWER sig=j
> CSC CONNECT
> [40951.343776] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
> [40951.447659] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
> 0x501
> [40951.499311] ehci_hcd 0000:00:10.4: port 5 high speed
> [40951.499322] ehci_hcd 0000:00:10.4: GetStatus port 5 status 001005 POWER
> sig=se0 PE CONNECT
> [40951.551020] usb 1-5: new high speed USB device using ehci_hcd and address 13
> [40951.602326] ehci_hcd 0000:00:10.4: port 5 high speed
> [40951.602336] ehci_hcd 0000:00:10.4: GetStatus port 5 status 001005 POWER
> sig=se0 PE CONNECT
> [40951.666726] usb 1-5: default language 0x0409
> [40951.667162] usb 1-5: udev 13, busnum 1, minor = 12
> [40951.667168] usb 1-5: New USB device found, idVendor=03f0, idProduct=3b17
> [40951.667174] usb 1-5: New USB device strings: Mfr=1, Product=2,
> SerialNumber=3
> [40951.667180] usb 1-5: Product: HP LaserJet M1005
> [40951.667185] usb 1-5: Manufacturer: Hewlett-Packard
> [40951.667190] usb 1-5: SerialNumber: KJ15H0P
> [40951.667335] usb 1-5: uevent
> [40951.667370] usb 1-5: usb_probe_device
> [40951.667376] usb 1-5: configuration #1 chosen from 1 choice
> [40951.667996] usb 1-5: adding 1-5:1.0 (config #1, interface 0)
> [40951.668052] usb 1-5:1.0: uevent
> [40951.668160] usb 1-5: adding 1-5:1.1 (config #1, interface 1)
> [40951.668194] usb 1-5:1.1: uevent
> [40951.668225] usblp 1-5:1.1: usb_probe_interface
> [40951.668230] usblp 1-5:1.1: usb_probe_interface - got id
> [40951.669741] drivers/usb/core/file.c: looking for a minor, starting at 0
> [40951.669817] usblp0: USB Bidirectional printer dev 13 if 1 alt 0 proto 2 vid
> 0x03F0 pid 0x3B17
> [40951.669829] drivers/usb/core/inode.c: creating file '013'
> [40951.672530] usb 1-5: uevent
>
>
> scanimage only waiting, not scanning, so i hit Ctrl+C twice to stop scanimage.
> i see this in dmesg output:
>
> [41177.909824] usb usb4: usb auto-resume
> [41177.909833] usb usb4: wakeup_rh
> [41177.941015] hub 4-0:1.0: hub_resume
> [41177.941049] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [41177.941165] usb usb2: usb auto-resume
> [41177.941169] usb usb2: wakeup_rh
> [41177.973013] hub 2-0:1.0: hub_resume
> [41177.973037] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [41177.973124] usb usb5: usb auto-resume
> [41177.973127] usb usb5: wakeup_rh
> [41178.005013] hub 5-0:1.0: hub_resume
> [41178.005040] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0000
> [41178.005511] usb 1-5: usbfs: interface 1 claimed by usblp while 'scanimage'
> sets config #1
> [41179.000021] usb usb4: suspend_rh (auto-stop)
> [41179.000043] usb usb2: suspend_rh (auto-stop)
> [41179.000060] usb usb5: suspend_rh (auto-stop)
> [41180.000045] hub 4-0:1.0: hub_suspend
> [41180.000062] usb usb4: bus auto-suspend
> [41180.000066] usb usb4: suspend_rh
> [41180.000084] hub 2-0:1.0: hub_suspend
> [41180.000088] usb usb2: bus auto-suspend
> [41180.000091] usb usb2: suspend_rh
> [41181.001035] hub 5-0:1.0: hub_suspend
> [41181.001052] usb usb5: bus auto-suspend
> [41181.001058] usb usb5: suspend_rh
>
>
> when i run scanimage now, it scan one page again, and after next run situation
> repeats.
> it looks like scanimage reset USB bus,
> and lost connection to old device, and not connect to newly created device.
>
> in udev i have hardcoded device name, so
> scanimage -L reports still same device, so device name is not problem
> hpljm1005:libusb:001:scanner0
>
> where can be problem?
> is it clear what i am trying to describe?
> do you need any other info from me?
>
> regards
>
> viktor
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>

-- 
"The truth is an offense, but not a sin"