[sane-devel] dell aio 926
Yves Jeanrenaud
yves.jeanrenaud at gmail.com
Mon Aug 16 16:06:56 UTC 2010
I tried to figure out some more info but I'm actually stuck.
You advised me to log the trafix scanning on windows. How may I do this?
regards
Yves
2010/7/24 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
> another update. I downloaded and compiled the backend:
> new sane-find-scanner -v -v:
>
> This is sane-find-scanner from sane-backends 1.0.21
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
> checking /dev/scanner... failed to open (Invalid argument)
> checking /dev/sg0... failed to open (Invalid argument)
> checking /dev/sg1... failed to open (Invalid argument)
> checking /dev/sg2... failed to open (Invalid argument)
> checking /dev/sg3... failed to open (Invalid argument)
> checking /dev/sg4... failed to open (Invalid argument)
> checking /dev/sg5... failed to open (Invalid argument)
> checking /dev/sg6... failed to open (Invalid argument)
> checking /dev/sg7... failed to open (Invalid argument)
> checking /dev/sg8... failed to open (Invalid argument)
> checking /dev/sg9... failed to open (Invalid argument)
> checking /dev/sga... failed to open (Invalid argument)
> checking /dev/sgb... failed to open (Invalid argument)
> checking /dev/sgc... failed to open (Invalid argument)
> checking /dev/sgd... failed to open (Invalid argument)
> checking /dev/sge... failed to open (Invalid argument)
> checking /dev/sgf... failed to open (Invalid argument)
> checking /dev/sgg... failed to open (Invalid argument)
> checking /dev/sgh... failed to open (Invalid argument)
> checking /dev/sgi... failed to open (Invalid argument)
> checking /dev/sgj... failed to open (Invalid argument)
> checking /dev/sgk... failed to open (Invalid argument)
> checking /dev/sgl... failed to open (Invalid argument)
> checking /dev/sgm... failed to open (Invalid argument)
> checking /dev/sgn... failed to open (Invalid argument)
> checking /dev/sgo... failed to open (Invalid argument)
> checking /dev/sgp... failed to open (Invalid argument)
> checking /dev/sgq... failed to open (Invalid argument)
> checking /dev/sgr... failed to open (Invalid argument)
> checking /dev/sgs... failed to open (Invalid argument)
> checking /dev/sgt... failed to open (Invalid argument)
> checking /dev/sgu... failed to open (Invalid argument)
> checking /dev/sgv... failed to open (Invalid argument)
> checking /dev/sgw... failed to open (Invalid argument)
> checking /dev/sgx... failed to open (Invalid argument)
> checking /dev/sgy... failed to open (Invalid argument)
> checking /dev/sgz... failed to open (Invalid argument)
> # No SCSI scanners found. If you expected something different, make sure that
> # you have loaded a kernel SCSI driver for your SCSI adapter.
> # Also you need support for SCSI Generic (sg) in your operating system.
> # If using Linux, try "modprobe sg".
>
> searching for USB scanners:
> checking /dev/usb/scanner... failed to open (Invalid argument)
> checking /dev/usb/scanner0... failed to open (Invalid argument)
> checking /dev/usb/scanner1... failed to open (Invalid argument)
> checking /dev/usb/scanner2... failed to open (Invalid argument)
> checking /dev/usb/scanner3... failed to open (Invalid argument)
> checking /dev/usb/scanner4... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner5... failed to open (Invalid argument)
> checking /dev/usb/scanner7... failed to open (Invalid argument)
> checking /dev/usb/scanner8... failed to open (Invalid argument)
> checking /dev/usb/scanner9... failed to open (Invalid argument)
> checking /dev/usb/scanner10... failed to open (Invalid argument)
> checking /dev/usb/scanner11... failed to open (Invalid argument)
> checking /dev/usb/scanner12... failed to open (Invalid argument)
> checking /dev/usb/scanner13... failed to open (Invalid argument)
> checking /dev/usb/scanner14... failed to open (Invalid argument)
> checking /dev/usb/scanner15... failed to open (Invalid argument)
> checking /dev/usbscanner... failed to open (Invalid argument)
> checking /dev/usbscanner0... failed to open (Invalid argument)
> checking /dev/usbscanner1... failed to open (Invalid argument)
> checking /dev/usbscanner2... failed to open (Invalid argument)
> checking /dev/usbscanner3... failed to open (Invalid argument)
> checking /dev/usbscanner4... failed to open (Invalid argument)
> checking /dev/usbscanner5... failed to open (Invalid argument)
> checking /dev/usbscanner6... failed to open (Invalid argument)
> checking /dev/usbscanner7... failed to open (Invalid argument)
> checking /dev/usbscanner8... failed to open (Invalid argument)
> checking /dev/usbscanner9... failed to open (Invalid argument)
> checking /dev/usbscanner10... failed to open (Invalid argument)
> checking /dev/usbscanner11... failed to open (Invalid argument)
> checking /dev/usbscanner12... failed to open (Invalid argument)
> checking /dev/usbscanner13... failed to open (Invalid argument)
> checking /dev/usbscanner14... failed to open (Invalid argument)
> checking /dev/usbscanner15... failed to open (Invalid argument)
> trying libusb:
>
> <device descriptor of 0x04b8/0x0005 at 002:005 (EPSON USB Printer)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x04B8
> idProduct 0x0005
> bcdDevice 1.00
> iManufacturer 1 (EPSON)
> iProduct 2 (USB Printer)
> iSerialNumber 3 (08P010209120904030)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 2 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 7
> bInterfaceSubClass 1
> bInterfaceProtocol 2
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 (out 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x413c/0x5115 at 002:004 (Language Error Language Error)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x413C
> idProduct 0x5115
> bcdDevice 0.01
> iManufacturer 1 (Language Error)
> iProduct 2 (Language Error)
> iSerialNumber 3 (Language Error)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 117
> bNumInterfaces 4
> bConfigurationValue 1
> iConfiguration 8 (Language Error)
> bmAttributes 192 (Self-powered)
> MaxPower 16 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255
> bInterfaceSubClass 255
> bInterfaceProtocol 255
> iInterface 4 (Language Error)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x86 (in 0x06)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x06 (out 0x06)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x87 (in 0x07)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 3>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x07 (out 0x07)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <interface 1>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 1
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 7
> bInterfaceSubClass 1
> bInterfaceProtocol 2
> iInterface 5 (Language Error)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 (out 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <interface 2>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 2
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 3
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 6 (Language Error)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x83 (in 0x03)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 8
> bInterval 100 ms
> bRefresh 0
> bSynchAddress 0
> <interface 3>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 3
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8
> bInterfaceSubClass 6
> bInterfaceProtocol 80
> iInterface 7 (Language Error)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x88 (in 0x08)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x08 (out 0x08)
> bmAttributes 2 (bulk)
> wMaxPacketSize 64
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bcdUSB = 0x200)
> checking for GT-8911 ...
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bcdUSB = 0x200)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL84x ...
> this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822 ...
> this is not a RTS8822 (bNumEndpoints = 4)
> checking for rts8858c ...
> this is not a rts8858c (bcdUSB = 0x200)
> checking for SQ113 ...
> this is not a SQ113 (bNumEndpoints = 4)
> checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ...
> this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass = 0)
> checking for rts8801/rts8891 ...
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
> <Couldn't determine the type of the USB chip (result from sane-backends 1.0.21)>
>
> found USB scanner (vendor=0x413c [Language Error], product=0x5115
> [Language Error]) at libusb:002:004
>
> <device descriptor of 0x05e3/0x0605 at 002:002 (USB2.0 Hub)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x05E3
> idProduct 0x0605
> bcdDevice 6.011
> iManufacturer 0 ()
> iProduct 1 (USB2.0 Hub)
> iSerialNumber 0 ()
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 100 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 1
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.26-2-ixp4xx
> ohci_hcd OHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
> iProduct 2 (OHCI Host Controller)
> iSerialNumber 1 (0000:00:01.0)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.26-2-ixp4xx
> ohci_hcd OHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 1.10
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0001
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
> iProduct 2 (OHCI Host Controller)
> iSerialNumber 1 (0000:00:01.1)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 2
> bInterval 255 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x05ac/0x1203 at 001:006 (Apple iPod)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x05AC
> idProduct 0x1203
> bcdDevice 0.01
> iManufacturer 1 (Apple)
> iProduct 2 (iPod)
> iSerialNumber 3 (0000004AFC2D)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 32
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 500 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 2
> bInterfaceClass 8
> bInterfaceSubClass 6
> bInterfaceProtocol 80
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x01 (out 0x01)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
>
> <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.26-2-ixp4xx
> ehci_hcd EHCI Host Controller)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 9
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1D6B
> idProduct 0x0002
> bcdDevice 2.06
> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ehci_hcd)
> iProduct 2 (EHCI Host Controller)
> iSerialNumber 1 (0000:00:01.2)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 25
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 224 (Self-poweredRemote Wakeup)
> MaxPower 0 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 1
> bInterfaceClass 9
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0 ()
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 4
> bInterval 12 ms
> bRefresh 0
> bSynchAddress 0
> # Your USB scanner was (probably) detected. It may or may not be supported by
> # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
> # can't be detected by this program.
> done
>
>
> 2010/7/22 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
>> I will upgrade the backend. Wonder why my debian repositroy supplied
>> such an old package.
>> I would make you a log of the scanner, if you advise me how to.
>> yes it is a strongARM device with debian lenny on it.
>>
>> yves
>>
>>
>> 2010/7/22 m. allan noah <kitno455 at gmail.com>:
>>> Some points/questions-
>>>
>>> 1. This version of sane-backends is ancient, I recommend an upgrade.
>>> 2. It appears that this scanner (and it's Lexmark version) is not
>>> currently supported
>>> 3. Perhaps you can get a log of this machine scanning under windows?
>>> Stef might be able to determine if it compatible with lexmark backend.
>>> 4. Is this a StrongARM system?
>>>
>>> allan
>>>
>>> On Thu, Jul 22, 2010 at 2:38 AM, Yves Jeanrenaud
>>> <yves.jeanrenaud at gmail.com> wrote:
>>>> Oh I see. sorry for beeing so naive.
>>>> here is the output:
>>>> ----
>>>> This is sane-find-scanner from sane-backends 1.0.19
>>>>
>>>> # sane-find-scanner will now attempt to detect your scanner. If the
>>>> # result is different from what you expected, first make sure your
>>>> # scanner is powered up and properly connected to your computer.
>>>>
>>>> searching for SCSI scanners:
>>>> checking /dev/scanner... failed to open (Invalid argument)
>>>> checking /dev/sg0... failed to open (Invalid argument)
>>>> checking /dev/sg1... failed to open (Invalid argument)
>>>> checking /dev/sg2... failed to open (Invalid argument)
>>>> checking /dev/sg3... failed to open (Invalid argument)
>>>> checking /dev/sg4... failed to open (Invalid argument)
>>>> checking /dev/sg5... failed to open (Invalid argument)
>>>> checking /dev/sg6... failed to open (Invalid argument)
>>>> checking /dev/sg7... failed to open (Invalid argument)
>>>> checking /dev/sg8... failed to open (Invalid argument)
>>>> checking /dev/sg9... failed to open (Invalid argument)
>>>> checking /dev/sga... failed to open (Invalid argument)
>>>> checking /dev/sgb... failed to open (Invalid argument)
>>>> checking /dev/sgc... failed to open (Invalid argument)
>>>> checking /dev/sgd... failed to open (Invalid argument)
>>>> checking /dev/sge... failed to open (Invalid argument)
>>>> checking /dev/sgf... failed to open (Invalid argument)
>>>> checking /dev/sgg... failed to open (Invalid argument)
>>>> checking /dev/sgh... failed to open (Invalid argument)
>>>> checking /dev/sgi... failed to open (Invalid argument)
>>>> checking /dev/sgj... failed to open (Invalid argument)
>>>> checking /dev/sgk... failed to open (Invalid argument)
>>>> checking /dev/sgl... failed to open (Invalid argument)
>>>> checking /dev/sgm... failed to open (Invalid argument)
>>>> checking /dev/sgn... failed to open (Invalid argument)
>>>> checking /dev/sgo... failed to open (Invalid argument)
>>>> checking /dev/sgp... failed to open (Invalid argument)
>>>> checking /dev/sgq... failed to open (Invalid argument)
>>>> checking /dev/sgr... failed to open (Invalid argument)
>>>> checking /dev/sgs... failed to open (Invalid argument)
>>>> checking /dev/sgt... failed to open (Invalid argument)
>>>> checking /dev/sgu... failed to open (Invalid argument)
>>>> checking /dev/sgv... failed to open (Invalid argument)
>>>> checking /dev/sgw... failed to open (Invalid argument)
>>>> checking /dev/sgx... failed to open (Invalid argument)
>>>> checking /dev/sgy... failed to open (Invalid argument)
>>>> checking /dev/sgz... failed to open (Invalid argument)
>>>> # No SCSI scanners found. If you expected something different, make sure that
>>>> # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>> # Also you need support for SCSI Generic (sg) in your operating system.
>>>> # If using Linux, try "modprobe sg".
>>>>
>>>> searching for USB scanners:
>>>> checking /dev/usb/scanner... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner0... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner1... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner2... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner3... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner4... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner5... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner7... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner8... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner9... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner10... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner11... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner12... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner13... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner14... failed to open (Invalid argument)
>>>> checking /dev/usb/scanner15... failed to open (Invalid argument)
>>>> checking /dev/usbscanner... failed to open (Invalid argument)
>>>> checking /dev/usbscanner0... failed to open (Invalid argument)
>>>> checking /dev/usbscanner1... failed to open (Invalid argument)
>>>> checking /dev/usbscanner2... failed to open (Invalid argument)
>>>> checking /dev/usbscanner3... failed to open (Invalid argument)
>>>> checking /dev/usbscanner4... failed to open (Invalid argument)
>>>> checking /dev/usbscanner5... failed to open (Invalid argument)
>>>> checking /dev/usbscanner6... failed to open (Invalid argument)
>>>> checking /dev/usbscanner7... failed to open (Invalid argument)
>>>> checking /dev/usbscanner8... failed to open (Invalid argument)
>>>> checking /dev/usbscanner9... failed to open (Invalid argument)
>>>> checking /dev/usbscanner10... failed to open (Invalid argument)
>>>> checking /dev/usbscanner11... failed to open (Invalid argument)
>>>> checking /dev/usbscanner12... failed to open (Invalid argument)
>>>> checking /dev/usbscanner13... failed to open (Invalid argument)
>>>> checking /dev/usbscanner14... failed to open (Invalid argument)
>>>> checking /dev/usbscanner15... failed to open (Invalid argument)
>>>> trying libusb:
>>>>
>>>> <device descriptor of 0x413c/0x5115 at 002:004 (Language Error Language Error)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 2.00
>>>> bDeviceClass 0
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x413C
>>>> idProduct 0x5115
>>>> bcdDevice 0.01
>>>> iManufacturer 1 (Language Error)
>>>> iProduct 2 (Language Error)
>>>> iSerialNumber 3 (Language Error)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 117
>>>> bNumInterfaces 4
>>>> bConfigurationValue 1
>>>> iConfiguration 8 (Language Error)
>>>> bmAttributes 192 (Self-powered)
>>>> MaxPower 16 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 4
>>>> bInterfaceClass 255
>>>> bInterfaceSubClass 255
>>>> bInterfaceProtocol 255
>>>> iInterface 4 (Language Error)
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x86 (in 0x06)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 1>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x06 (out 0x06)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 2>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x87 (in 0x07)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 3>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x07 (out 0x07)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <interface 1>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 1
>>>> bAlternateSetting 0
>>>> bNumEndpoints 2
>>>> bInterfaceClass 7
>>>> bInterfaceSubClass 1
>>>> bInterfaceProtocol 2
>>>> iInterface 5 (Language Error)
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x81 (in 0x01)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 1>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x01 (out 0x01)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <interface 2>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 2
>>>> bAlternateSetting 0
>>>> bNumEndpoints 1
>>>> bInterfaceClass 3
>>>> bInterfaceSubClass 0
>>>> bInterfaceProtocol 0
>>>> iInterface 6 (Language Error)
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x83 (in 0x03)
>>>> bmAttributes 3 (interrupt)
>>>> wMaxPacketSize 8
>>>> bInterval 100 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <interface 3>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 3
>>>> bAlternateSetting 0
>>>> bNumEndpoints 2
>>>> bInterfaceClass 8
>>>> bInterfaceSubClass 6
>>>> bInterfaceProtocol 80
>>>> iInterface 7 (Language Error)
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x88 (in 0x08)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 1>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x08 (out 0x08)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <trying to find out which USB chip is used>
>>>> checking for GT-6801 ...
>>>> this is not a GT-6801 (bDeviceClass = 0)
>>>> checking for GT-6816 ...
>>>> this is not a GT-6816 (bcdUSB = 0x200)
>>>> checking for GT-8911 ...
>>>> this is not a GT-8911 (check 2, bcdUSB = 0x200)
>>>> checking for MA-1017 ...
>>>> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for MA-1015 ...
>>>> this is not a MA-1015 (bDeviceClass = 0)
>>>> checking for MA-1509 ...
>>>> this is not a MA-1509 (bDeviceClass = 0)
>>>> checking for LM983[1,2,3] ...
>>>> this is not a LM983x (bcdUSB = 0x200)
>>>> checking for GL646 ...
>>>> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for GL646_HP ...
>>>> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for GL660+GL646 ...
>>>> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for GL84x ...
>>>> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for ICM532B ...
>>>> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>>>> checking for PV8630/LM9830 ...
>>>> this is not a PV8630/LM9830 (bcdUSB = 0x200)
>>>> checking for M011 ...
>>>> this is not a M011 (bDeviceClass = 0)
>>>> checking for RTS8822 ...
>>>> this is not a RTS8822 (bNumEndpoints = 4)
>>>> checking for rts8858c ...
>>>> this is not a rts8858c (bcdUSB = 0x200)
>>>> checking for SQ113 ...
>>>> this is not a SQ113 (bNumEndpoints = 4)
>>>> checking for HP5550/5590/7650 chipset ...
>>>> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>>>> checking for rts8801/rts8891 ...
>>>> this is not a rts8801/rts8891 (bcdUSB = 0x200)
>>>> <Couldn't determine the type of the USB chip (result from sane-backends 1.0.19)>
>>>>
>>>> found USB scanner (vendor=0x413c [Language Error], product=0x5115
>>>> [Language Error]) at libusb:002:004
>>>>
>>>> <device descriptor of 0x04b8/0x0005 at 002:003 (EPSON USB Printer)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 1.10
>>>> bDeviceClass 0
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x04B8
>>>> idProduct 0x0005
>>>> bcdDevice 1.00
>>>> iManufacturer 1 (EPSON)
>>>> iProduct 2 (USB Printer)
>>>> iSerialNumber 3 (08P010209120904030)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 32
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 192 (Self-powered)
>>>> MaxPower 2 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 2
>>>> bInterfaceClass 7
>>>> bInterfaceSubClass 1
>>>> bInterfaceProtocol 2
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x01 (out 0x01)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 1>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x82 (in 0x02)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 64
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <device descriptor of 0x05e3/0x0605 at 002:002 (USB2.0 Hub)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 2.00
>>>> bDeviceClass 9
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x05E3
>>>> idProduct 0x0605
>>>> bcdDevice 6.011
>>>> iManufacturer 0 ()
>>>> iProduct 1 (USB2.0 Hub)
>>>> iSerialNumber 0 ()
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 25
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 224 (Self-poweredRemote Wakeup)
>>>> MaxPower 100 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 1
>>>> bInterfaceClass 9
>>>> bInterfaceSubClass 0
>>>> bInterfaceProtocol 0
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x81 (in 0x01)
>>>> bmAttributes 3 (interrupt)
>>>> wMaxPacketSize 1
>>>> bInterval 255 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.26-2-ixp4xx
>>>> ohci_hcd OHCI Host Controller)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 1.10
>>>> bDeviceClass 9
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x1D6B
>>>> idProduct 0x0001
>>>> bcdDevice 2.06
>>>> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>>> iProduct 2 (OHCI Host Controller)
>>>> iSerialNumber 1 (0000:00:01.0)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 25
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 224 (Self-poweredRemote Wakeup)
>>>> MaxPower 0 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 1
>>>> bInterfaceClass 9
>>>> bInterfaceSubClass 0
>>>> bInterfaceProtocol 0
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x81 (in 0x01)
>>>> bmAttributes 3 (interrupt)
>>>> wMaxPacketSize 2
>>>> bInterval 255 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <device descriptor of 0x1d6b/0x0001 at 003:001 (Linux 2.6.26-2-ixp4xx
>>>> ohci_hcd OHCI Host Controller)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 1.10
>>>> bDeviceClass 9
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x1D6B
>>>> idProduct 0x0001
>>>> bcdDevice 2.06
>>>> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ohci_hcd)
>>>> iProduct 2 (OHCI Host Controller)
>>>> iSerialNumber 1 (0000:00:01.1)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 25
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 224 (Self-poweredRemote Wakeup)
>>>> MaxPower 0 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 1
>>>> bInterfaceClass 9
>>>> bInterfaceSubClass 0
>>>> bInterfaceProtocol 0
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x81 (in 0x01)
>>>> bmAttributes 3 (interrupt)
>>>> wMaxPacketSize 2
>>>> bInterval 255 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <device descriptor of 0x05ac/0x1203 at 001:006 (Apple iPod)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 2.00
>>>> bDeviceClass 0
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x05AC
>>>> idProduct 0x1203
>>>> bcdDevice 0.01
>>>> iManufacturer 1 (Apple)
>>>> iProduct 2 (iPod)
>>>> iSerialNumber 3 (0000004AFC2D)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 32
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 192 (Self-powered)
>>>> MaxPower 500 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 2
>>>> bInterfaceClass 8
>>>> bInterfaceSubClass 6
>>>> bInterfaceProtocol 80
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x82 (in 0x02)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 512
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> <endpoint 1>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x01 (out 0x01)
>>>> bmAttributes 2 (bulk)
>>>> wMaxPacketSize 512
>>>> bInterval 0 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>>
>>>> <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.26-2-ixp4xx
>>>> ehci_hcd EHCI Host Controller)>
>>>> bLength 18
>>>> bDescriptorType 1
>>>> bcdUSB 2.00
>>>> bDeviceClass 9
>>>> bDeviceSubClass 0
>>>> bDeviceProtocol 0
>>>> bMaxPacketSize0 64
>>>> idVendor 0x1D6B
>>>> idProduct 0x0002
>>>> bcdDevice 2.06
>>>> iManufacturer 3 (Linux 2.6.26-2-ixp4xx ehci_hcd)
>>>> iProduct 2 (EHCI Host Controller)
>>>> iSerialNumber 1 (0000:00:01.2)
>>>> bNumConfigurations 1
>>>> <configuration 0>
>>>> bLength 9
>>>> bDescriptorType 2
>>>> wTotalLength 25
>>>> bNumInterfaces 1
>>>> bConfigurationValue 1
>>>> iConfiguration 0 ()
>>>> bmAttributes 224 (Self-poweredRemote Wakeup)
>>>> MaxPower 0 mA
>>>> <interface 0>
>>>> <altsetting 0>
>>>> bLength 9
>>>> bDescriptorType 4
>>>> bInterfaceNumber 0
>>>> bAlternateSetting 0
>>>> bNumEndpoints 1
>>>> bInterfaceClass 9
>>>> bInterfaceSubClass 0
>>>> bInterfaceProtocol 0
>>>> iInterface 0 ()
>>>> <endpoint 0>
>>>> bLength 7
>>>> bDescriptorType 5
>>>> bEndpointAddress 0x81 (in 0x01)
>>>> bmAttributes 3 (interrupt)
>>>> wMaxPacketSize 4
>>>> bInterval 12 ms
>>>> bRefresh 0
>>>> bSynchAddress 0
>>>> # Your USB scanner was (probably) detected. It may or may not be supported by
>>>> # SANE. Try scanimage -L and read the backend's manpage.
>>>>
>>>> # Not checking for parallel port scanners.
>>>>
>>>> # Most Scanners connected to the parallel port or other proprietary ports
>>>> # can't be detected by this program.
>>>> done
>>>> --------------
>>>> regards
>>>>
>>>> yves
>>>>
>>>>
>>>> 2010/7/21 m. allan noah <kitno455 at gmail.com>:
>>>>> Just because the device is made by Lexmark does not mean it will be
>>>>> supported by the lexmark sane backend. What does
>>>>>
>>>>> sane-find-scanner -v -v
>>>>>
>>>>> report?
>>>>>
>>>>> allan
>>>>>
>>>>> On Wed, Jul 21, 2010 at 3:53 PM, Yves Jeanrenaud
>>>>> <yves.jeanrenaud at gmail.com> wrote:
>>>>>> just some update. I fixed the usb issue. one hub was broken. dang it.
>>>>>> anyway, sane-find-scanner now puts out:
>>>>>> found USB scanner (vendor=0x413c [Language Error], product=0x5115
>>>>>> [Language Error]) at libusb:002:022
>>>>>> and sanimage -L putts out
>>>>>>
>>>>>> No scanners were identified. If you were expecting something different,
>>>>>> check that the scanner is plugged in, turned on and detected by the
>>>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>>>> which came with this software (README, FAQ, manpages).
>>>>>>
>>>>>> yves
>>>>>>
>>>>>> 2010/7/21 Yves Jeanrenaud <yves.jeanrenaud at gmail.com>:
>>>>>>> thanks. I tried to enable the lexmark backend, but I guess the device
>>>>>>> poses a more basic problem to me:
>>>>>>> it does not show up in lsusb or proc/bus/usb/devices at all. and
>>>>>>> sane-find-scanner does not see it.
>>>>>>> what could I do?
>>>>>>>
>>>>>>> yves
>>>>>>>
>>>>>>> 2010/7/18 m. allan noah <kitno455 at gmail.com>:
>>>>>>>> It is almost certainly a lexmark product, something like the X3650 maybe?
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Sat, Jul 17, 2010 at 9:56 AM, Yves Jeanrenaud
>>>>>>>> <yves.jeanrenaud at gmail.com> wrote:
>>>>>>>>> my hp 3300c just broke and I was wondering if there is any way to get
>>>>>>>>> the scanner of the dell all-in-one 926 to work with sane?
>>>>>>>>> best regards
>>>>>>>>>
>>>>>>>>> yves
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> "The truth is an offense, but not a sin"
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> "The truth is an offense, but not a sin"
>>>
>>
>
More information about the sane-devel
mailing list