[sane-devel] R: Re: Re: Flat Scan USB vs. Lucid 10.04 LTS

[walla at tiscali.it]

OS on my machine is lucid.
On the same machine I have a Oracle VM so I 
have installed karmic as VM.

In reality the mahcine is only one and 
scanner is plugged on the same USB (0x05d8 0x4002).



----Messaggio 
originale----
Da: kitno455 at gmail.com
Data: 30/08/2010 17.00
A: 
"walla at tiscali.it"<walla at tiscali.it>
Cc: <sane-devel at lists.alioth.
debian.org>
Ogg: Re: Re: [sane-devel] Flat Scan USB vs. Lucid 10.04 LTS


sane 1.0.20 in both cases? I wonder what patches ubuntu applied? I

also suspect usb problem in the machine- any chance of switching the
OS 
versions between the two machines, perhaps by using a liveCD?

allan


On Mon, Aug 30, 2010 at 10:57 AM, walla at tiscali.it <walla at tiscali.it> 
wrote:
> karmic 9.10 --> libsane 10.0.20-4ubuntu3 --> scanner works 
fine
> lucid
> 10.04 --> libsane 10.0.20-13ubuntu2 --> scanner doesn't 
work
>
> Both
> machines are 32 bit
>
> Thank you!
>
>
> ----Messaggio 
originale----
> Da:
> kitno455 at gmail.com
> Data: 29/08/2010 18.08
> A: 
"walla at tiscali.it"
> <walla at tiscali.it>
> Cc: <sane-devel at lists.alioth.
debian.org>
> Ogg: Re:
> [sane-devel] Flat Scan USB vs. Lucid 10.04 LTS

>
> More information
> please- which version of sane-backends (aka 
libsane)
> are you running on
> these two machines? The version of 
ubuntu is
> useless to us.
>
> Also- is
> one of the machines 64 bit 
and the other 32bit?
>
> allan
>
> On Sun, Aug 29,
> 2010 at 11:44 AM, 
walla at tiscali.it <walla at tiscali.it> wrote:
>> Hi,
>>
>>
> I subscribe 
this mailing list because I'm not able to solve a problem
> with
>> 
sane vs. lucid (10.04LTS).
>>
>> I have a Flat scan usb 19200
> (Trust) 
and it doesn't work under lucid, I
>> followed the instructions,
> copy 
its firmware in the right path and
>> configured gt68xx.conf using
> 
Artec Ultima 2000 as shown in the instructions.
>>
>> usb 0x05d8 0x4002

>>
> # Artec Ultima 2000:
>> override "artec-ultima-2000"
>> firmware 
"PS1fw.
> usb"
>>
>> When I try to launch Xsane from prompt line it 
seems there is
> a
>> calibration's problem of the scanner (I think!):

>>
>> [gt68xx]
> gt68xx_afe_cis_auto: setting exposure reached limit
>>

>> The result of
> the acquisition is a black screen!
>>
>> If I 
perform the same steps of
> the instructions on Karmic 9.10 the scanner

>> works fine!...so I
> understood well the procedure to install 
scanner!
>>
>> A difference
> between lucid and karmic when I start 
Xsane:
>>
>> 1) on Karmic Xsane
> recognize scanner as Artec 2000
>> 2) 
on Lucid Xsane recognize scanner
> as Bear Paw 1200 (it's default 
setting
>> if you don't use override but
> I perform override in gt68xx.
conf as shown
>> before)
>>
>> Other settings
> of Xsane:
>>
>> backend 
1.0.20
>> deep 8 bit
>>
>> Thank you very much in
> advance for your 
support!
>>
>> Walla
>>
>> --
>> sane-devel mailing list:
> sane-
devel at lists.alioth.debian.org
>> http://lists.alioth.debian.
> 
org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject

> "unsubscribe your_password"
>>             to sane-devel-
request at lists.
> alioth.debian.org
>>
>
>
>
> --
> "The truth is an 
offense, but not a sin"
>
>
>
>
>
> Risparmia con Tutto Incluso Light: 
telefono + adsl 8 mega a soli 19,95 € al mese per un anno!
>
> SCONTO 
DI 120 EURO!
>
> http://abbonati.tiscali.it/telefono-
adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw
>



-- 
"The truth 
is an offense, but not a sin"





Risparmia con Tutto Incluso Light: telefono + adsl 8 mega a soli 19,95 € al mese per un anno!

SCONTO DI 120 EURO! 

http://abbonati.tiscali.it/telefono-adsl/prodotti/tc/tuttoincluso_light/?WT.mc_id=01fw