[sane-devel] Epjitsu (Fujitsu) S300 draws paper, but then gives I/O error

[m. allan noah]

That is an ancient version of sane-backends. Upgrade to 1.0.21.

allan

On Sun, Dec 19, 2010 at 5:37 PM, Uttiya Chowdhury
<chowdhury.uttiya at gmail.com> wrote:
> Hi,
> Gentoo 64 bit, kernel 2.6.34-r12.
> ==
> epjitsu.conf:
> firmware /usr/share/sane/epjitsu/300_0c00.nal
> usb 0x04c5 0x1156
> ==
> sane-find-scanner:
> found USB scanner (vendor=0x04c5 [FUJITSU], product=0x1156 [ScanSnap
> S300]) at libusb:001:014
> ==
> media-gfx/sane-backends
> Latest version available: 1.0.19-r2
> Latest version installed: 1.0.19-r2
> media-gfx/sane-frontends
> Latest version available: 1.0.14
> Latest version installed: 1.0.14
> ==
> From xsane, if I hit the scan button, scanner draws in paper, but then
> stops and after a couple of seconds, "Failed to start scanner: Error
> during device I/O".
> ==
> Any thoughts?
> ==
> last few lines from: SANE_DEBUG_EPJITSU=30 scanimage -b --source="ADF
> Duplex" --resolution 150 2> s300.log:
> ...
> ...
> [epjitsu] 4000 58 3f 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58
> [epjitsu] 4010 3f 4d 58 40 4d 57 40 4d 57 40 4d 58 40 4d 58 40
> [epjitsu] 4020 4e 58 40 4d 58 40 4d 58 40 4d 58 40 4d 57 40 4d
> [epjitsu] 4030 58 40 4d 58 40 4d 58 40 4d 57 3f 4d 57 3f 4d 57
> [epjitsu] 4040 3f 4d 58 3f 4d 58 40 4d 57 40 4d 59 40 4d 58 40
> [epjitsu] 4050 4d 58 40 4d 58 40 4d 57 40 4d 57 40 4d 58 40 4d
> [epjitsu] 4060 58 40 4d 57 40 4d 58 40 4d 58 40 4d 58 40 4d 58
> [epjitsu] 4070 40 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58 3f
> [epjitsu] 4080 4c 58 40 4d 57 40 4d 57 40 4d 58 40 4d 58 40 4d
> [epjitsu] 4090 58 40 4d 58 40 4d 58 40 4e 58 40 4d 57 40 4d 58
> [epjitsu] 40a0 40 4d 58 40 4d 58 3f 4d 58 40 4d 58 40 4d 58 40
> [epjitsu] 40b0 4d 58 40 4d 57 40 4d 58 40 4d 58 40 4d 58 3f 4d
> [epjitsu] 40c0 57 40 4d 58 40 4d 58 3f 4c 58 40 4d 58 40 4d 58
> [epjitsu] 40d0 40 4d 58 3f 4d 58 40 4d 58 3f 4d 57 40 4d 58 40
> [epjitsu] 40e0 4d 58 40 4d 58 40 4d 58 40 4d 57 3f 4d 58 3f 4d
> [epjitsu] 40f0 58 40 4d 58 40 4d 58 40 4d 58 40 4d 58 40 4d 57
> [epjitsu] 4100 40 4d 58 40 4d 57 3f 4d 57 40 4d 58 3f 4d 57 40
> [epjitsu] 4110 02 10 41 00 00 00 80 00
> [epjitsu] in: short read 25544/16664
> [epjitsu] do_cmd: finish
> [epjitsu] read_from_scanner: got GOOD/EOF (16664)
> [epjitsu] read_from_scanner: finish rB:8880 len:16664
> [epjitsu] read_from_scanner: start rB:8880 len:8880
> [epjitsu] do_cmd: start
> [epjitsu] in: memset 8880 bytes
> [epjitsu] in: reading 8880 bytes, timeout 10000
> [epjitsu] in: retVal 9
> [epjitsu] in: return error 'Error during device I/O'
> [epjitsu] read_from_scanner: error reading status = 9
> [epjitsu] read_from_scanner: finish rB:8880 len:0
> [epjitsu] coarsecal: cant read from scanner
> [epjitsu] sane_start: ERROR: failed to coarsecal
> [epjitsu] sane_cancel: start
> [epjitsu] sane_cancel: finish
> scanimage: sane_start: Error during device I/O
> [epjitsu] sane_cancel: start
> [epjitsu] sane_cancel: finish
> [epjitsu] sane_close: start
> [epjitsu] sane_cancel: start
> [epjitsu] sane_cancel: finish
> [epjitsu] lamp: start (0)
> [epjitsu] do_cmd: start
> [epjitsu] cmd: writing 2 bytes, timeout 10000
> [epjitsu] cmd: >>
> [epjitsu] 000: 1b d0
> [epjitsu] cmd: wrote 2 bytes, retVal 0
> [epjitsu] in: memset 1 bytes
> [epjitsu] in: reading 1 bytes, timeout 10000
> [epjitsu] in: retVal 0
> [epjitsu] in: read 1 bytes
> [epjitsu] in: <<
> [epjitsu] 000: 06
> [epjitsu] do_cmd: finish
> [epjitsu] do_cmd: start
> [epjitsu] cmd: writing 1 bytes, timeout 10000
> [epjitsu] cmd: >>
> [epjitsu] 000: 00
> [epjitsu] cmd: wrote 1 bytes, retVal 0
> [epjitsu] in: memset 1 bytes
> [epjitsu] in: reading 1 bytes, timeout 10000
> [epjitsu] in: retVal 0
> [epjitsu] in: read 1 bytes
> [epjitsu] in: <<
> [epjitsu] 000: 06
> [epjitsu] do_cmd: finish
> [epjitsu] lamp: finish
> [epjitsu] disconnect_fd: start
> [epjitsu] disconnecting usb device
> [epjitsu] disconnect_fd: finish
> [epjitsu] teardown_buffers: start
> [epjitsu] teardown_buffers: finish
> [epjitsu] sane_close: finish
> [epjitsu] sane_exit: start
> ===
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>



-- 
"The truth is an offense, but not a sin"