[sane-devel] trying Canon DR-5060-F
m. allan noah
kitno455 at gmail.com
Wed Dec 29 13:46:04 UTC 2010
Sorry, hit 'send' too soon- you should try:
SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 2>dr.log >dr.pnm
allan
On Wed, Dec 29, 2010 at 8:35 AM, m. allan noah <kitno455 at gmail.com> wrote:
> "scanimage: output is not a file, exiting"
>
> allan
>
> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
> <liste at alixen.fr> wrote:
>> Hi,
>>
>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>
>> ii libsane 1.0.21-2ubuntu2 API
>> library for scanners
>> ii sane-utils 1.0.21-2ubuntu2 API
>> library for scanners -- utilities
>>
>> The sane-find-scanner commands returns :
>> # sane-find-scanner will now attempt to detect your scanner. If the
>> # result is different from what you expected, first make sure your
>> # scanner is powered up and properly connected to your computer.
>>
>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>> # Your SCSI scanner was detected. It may or may not be supported by SANE.
>> Try
>> # scanimage -L and read the backend's manpage.
>>
>> # No USB scanners found. If you expected something different, make sure
>> that
>> # you have loaded a kernel driver for your USB host controller and have
>> setup
>> # the USB system correctly. See man sane-usb for details.
>>
>> # Not checking for parallel port scanners.
>>
>> # Most Scanners connected to the parallel port or other proprietary ports
>> # can't be detected by this program.
>>
>> when I tried the command "scanimage -L" the scanner wasn't recognized
>>
>> thanks to this message :
>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html ,
>> I've added the following lines to canon_dr.c at line 1203.
>>
>> else if (strstr (s->model_name,"DR-5060F")){
>> s->can_write_panel = 0;
>> }
>>
>>
>> Then I replace the compiled versions of libsane-canon_dr.la and
>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>
>> Now, the "scanimage -L" command returns :
>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>
>> Great, but the scanner doesn't work :
>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>> [sanei_debug] Setting debug level of canon_dr to 30.
>> [canon_dr] sane_init: start
>> [canon_dr] sane_init: canon_dr backend 1.0.35, from sane-backends 1.0.21
>> [canon_dr] sane_init: finish
>> [canon_dr] sane_open: start
>> [canon_dr] sane_open: no scanners currently attached, attaching
>> [canon_dr] sane_get_devices: start
>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>> [canon_dr] attach_one: start
>> [canon_dr] attach_one: looking for '/dev/sg2'
>> [canon_dr] connect_fd: start
>> [canon_dr] connect_fd: opening SCSI device
>> [canon_dr] connect_fd: cannot get requested buffer size (2097152/524288)
>> [canon_dr] wait_scanner: start
>> [canon_dr] do_scsi_cmd: start
>> [canon_dr] cmd: writing 6 bytes
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 00 00 00 ......
>> [canon_dr] do_scsi_cmd: finish
>> [canon_dr] wait_scanner: finish
>> [canon_dr] connect_fd: finish
>> [canon_dr] init_inquire: start
>> [canon_dr] do_scsi_cmd: start
>> [canon_dr] cmd: writing 6 bytes
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 12 00 00 00 30 00 ....0.
>> [canon_dr] in: reading 48 bytes
>> [canon_dr] in: <<
>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 20
>> ........CANON
>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 20 DR-5060F
>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 20 011020010607
>> [canon_dr] in: read 48 bytes
>> [canon_dr] do_scsi_cmd: finish
>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version 0110 at
>> /dev/sg2
>> [canon_dr] init_inquire: finish
>> [canon_dr] init_vpd: start
>> [canon_dr] do_scsi_cmd: start
>> [canon_dr] cmd: writing 6 bytes
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 12 01 f0 00 1e 00 ......
>> [canon_dr] in: reading 30 bytes
>> [canon_dr] in: <<
>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 c8
>> ....#.,.,..,.,..
>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00 .d............
>> [canon_dr] in: read 30 bytes
>> [canon_dr] do_scsi_cmd: finish
>> [canon_dr] init_vpd: length=23
>> [canon_dr] standard options
>> [canon_dr] basic x res: 300 dpi
>> [canon_dr] basic y res: 300 dpi
>> [canon_dr] step x res: 1 dpi
>> [canon_dr] step y res: 0 dpi
>> [canon_dr] max x res: 300 dpi
>> [canon_dr] max y res: 300 dpi
>> [canon_dr] min x res: 200 dpi
>> [canon_dr] min y res: 100 dpi
>> [canon_dr] 60 dpi: 0
>> [canon_dr] 75 dpi: 0
>> [canon_dr] 100 dpi: 0
>> [canon_dr] 120 dpi: 0
>> [canon_dr] 150 dpi: 0
>> [canon_dr] 160 dpi: 0
>> [canon_dr] 180 dpi: 0
>> [canon_dr] 200 dpi: 1
>> [canon_dr] 240 dpi: 1
>> [canon_dr] 300 dpi: 1
>> [canon_dr] 320 dpi: 0
>> [canon_dr] 400 dpi: 0
>> [canon_dr] 480 dpi: 0
>> [canon_dr] 600 dpi: 0
>> [canon_dr] 800 dpi: 0
>> [canon_dr] 1200 dpi: 0
>> [canon_dr] max width: 13952 (11.63 in)
>> [canon_dr] max length: 20408 (17.01 in)
>> [canon_dr] AWD: 0
>> [canon_dr] CE Emphasis: 0
>> [canon_dr] C Emphasis: 0
>> [canon_dr] High quality: 0
>> [canon_dr] grayscale: 1
>> [canon_dr] halftone: 1
>> [canon_dr] monochrome: 1
>> [canon_dr] overflow: 0
>> [canon_dr] init_vpd: finish
>> [canon_dr] init_model: start
>> [canon_dr] init_model: finish
>> [canon_dr] init_panel: start
>> [canon_dr] read_panel: start
>> [canon_dr] read_panel: finish 0
>> [canon_dr] send_panel: start
>> [canon_dr] send_panel: unsupported, finishing
>> [canon_dr] init_panel: finish
>> [canon_dr] init_user: start
>> [canon_dr] init_user: finish
>> [canon_dr] init_options: start
>> [canon_dr] init_options: finish
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnecting scsi device
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] attach_one: finish
>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>> [canon_dr] sane_get_devices: found 1 scanner(s)
>> [canon_dr] sane_get_devices: finish
>> [canon_dr] sane_open: device /dev/sg2 requested
>> [canon_dr] sane_open: device /dev/sg2 found
>> [canon_dr] connect_fd: start
>> [canon_dr] connect_fd: opening SCSI device
>> [canon_dr] wait_scanner: start
>> [canon_dr] do_scsi_cmd: start
>> [canon_dr] cmd: writing 6 bytes
>> [canon_dr] cmd: >>
>> [canon_dr] 000: 00 00 00 00 00 00 ......
>> [canon_dr] do_scsi_cmd: finish
>> [canon_dr] wait_scanner: finish
>> [canon_dr] connect_fd: finish
>> [canon_dr] sane_open: finish
>> [canon_dr] sane_get_option_descriptor: 0
>> [canon_dr] sane_control_option: get value for '' (0)
>> [canon_dr] sane_get_option_descriptor: 0
>> [canon_dr] sane_control_option: get value for '' (0)
>> [canon_dr] sane_get_option_descriptor: 1
>> [canon_dr] sane_get_option_descriptor: 2
>> [canon_dr] sane_get_option_descriptor: 3
>> [canon_dr] sane_get_option_descriptor: 4
>> [canon_dr] sane_get_option_descriptor: 5
>> [canon_dr] sane_get_option_descriptor: 6
>> [canon_dr] sane_get_option_descriptor: 7
>> [canon_dr] sane_get_option_descriptor: 8
>> [canon_dr] sane_get_option_descriptor: 9
>> [canon_dr] sane_get_option_descriptor: 10
>> [canon_dr] sane_get_option_descriptor: 11
>> [canon_dr] sane_get_option_descriptor: 12
>> [canon_dr] sane_get_option_descriptor: 13
>> [canon_dr] sane_get_option_descriptor: 14
>> [canon_dr] sane_get_option_descriptor: 15
>> [canon_dr] sane_get_option_descriptor: 16
>> [canon_dr] sane_get_option_descriptor: 17
>> [canon_dr] sane_get_option_descriptor: 18
>> [canon_dr] sane_get_option_descriptor: 19
>> [canon_dr] sane_get_option_descriptor: 20
>> [canon_dr] sane_get_option_descriptor: 21
>> [canon_dr] sane_get_option_descriptor: 22
>> [canon_dr] sane_get_option_descriptor: 23
>> [canon_dr] sane_get_option_descriptor: 24
>> [canon_dr] sane_get_option_descriptor: 25
>> [canon_dr] sane_get_option_descriptor: 26
>> [canon_dr] sane_get_option_descriptor: 27
>> [canon_dr] sane_get_option_descriptor: 28
>> [canon_dr] sane_get_option_descriptor: 29
>> [canon_dr] sane_get_option_descriptor: 30
>> [canon_dr] sane_get_option_descriptor: 31
>> [canon_dr] sane_get_option_descriptor: 32
>> [canon_dr] sane_get_option_descriptor: 33
>> [canon_dr] sane_get_option_descriptor: 34
>> [canon_dr] sane_get_option_descriptor: 35
>> [canon_dr] sane_get_option_descriptor: 36
>> [canon_dr] sane_get_option_descriptor: 37
>> [canon_dr] sane_get_option_descriptor: 38
>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>> [canon_dr] sane_get_option_descriptor: 8
>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>> [canon_dr] sane_get_option_descriptor: 9
>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>> scanimage: output is not a file, exiting
>> [canon_dr] sane_close: start
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnecting scsi device
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] image_buffers: start
>> [canon_dr] image_buffers: finish
>> [canon_dr] offset_buffers: start
>> [canon_dr] offset_buffers: finish
>> [canon_dr] gain_buffers: start
>> [canon_dr] gain_buffers: finish
>> [canon_dr] sane_close: finish
>> [canon_dr] sane_exit: start
>> [canon_dr] disconnect_fd: start
>> [canon_dr] disconnect_fd: finish
>> [canon_dr] sane_exit: finish
>>
>> Any idea ?
>>
>> Christophe.
>> --
>> Christophe Largeau
>> Alixen
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>> to sane-devel-request at lists.alioth.debian.org
>>
>
>
>
> --
> "The truth is an offense, but not a sin"
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list