[sane-devel] trying Canon DR-5060-F
Christophe Largeau (liste)
liste at alixen.fr
Wed Dec 29 14:29:24 UTC 2010
I will replug the scsi card into the orignal windows machine. Do you
have instruction for the log capture on windows ?
Christophe.
Le 29/12/2010 15:22, m. allan noah a écrit :
> hmm- it is mad about something we ask it to do in the set window
> command. I don't have a protocol manual for this machine, so we have
> to guess what the problem is. Or, we have to try and capture a log
> from Windows driver. Can you use this machine on windows?
>
> allan
>
> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
> <liste at alixen.fr> wrote:
>> the new dr.log is attached to this message.
>>
>> Christophe.
>>
>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>
>>> Sorry, hit 'send' too soon- you should try:
>>>
>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2 2>dr.log>dr.pnm
>>>
>>> allan
>>>
>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan noah<kitno455 at gmail.com> wrote:
>>>>
>>>> "scanimage: output is not a file, exiting"
>>>>
>>>> allan
>>>>
>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>
>>>>> ii libsane 1.0.21-2ubuntu2 API
>>>>> library for scanners
>>>>> ii sane-utils 1.0.21-2ubuntu2 API
>>>>> library for scanners -- utilities
>>>>>
>>>>> The sane-find-scanner commands returns :
>>>>> # sane-find-scanner will now attempt to detect your scanner. If the
>>>>> # result is different from what you expected, first make sure your
>>>>> # scanner is powered up and properly connected to your computer.
>>>>>
>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>> # Your SCSI scanner was detected. It may or may not be supported by
>>>>> SANE.
>>>>> Try
>>>>> # scanimage -L and read the backend's manpage.
>>>>>
>>>>> # No USB scanners found. If you expected something different, make sure
>>>>> that
>>>>> # you have loaded a kernel driver for your USB host controller and have
>>>>> setup
>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>
>>>>> # Not checking for parallel port scanners.
>>>>>
>>>>> # Most Scanners connected to the parallel port or other proprietary
>>>>> ports
>>>>> # can't be detected by this program.
>>>>>
>>>>> when I tried the command "scanimage -L" the scanner wasn't recognized
>>>>>
>>>>> thanks to this message :
>>>>>
>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html ,
>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>
>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>> s->can_write_panel = 0;
>>>>> }
>>>>>
>>>>>
>>>>> Then I replace the compiled versions of libsane-canon_dr.la and
>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>
>>>>> Now, the "scanimage -L" command returns :
>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>
>>>>> Great, but the scanner doesn't work :
>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>> [canon_dr] sane_init: start
>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from sane-backends 1.0.21
>>>>> [canon_dr] sane_init: finish
>>>>> [canon_dr] sane_open: start
>>>>> [canon_dr] sane_open: no scanners currently attached, attaching
>>>>> [canon_dr] sane_get_devices: start
>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>> [canon_dr] attach_one: start
>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>> [canon_dr] connect_fd: start
>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>> [canon_dr] connect_fd: cannot get requested buffer size (2097152/524288)
>>>>> [canon_dr] wait_scanner: start
>>>>> [canon_dr] do_scsi_cmd: start
>>>>> [canon_dr] cmd: writing 6 bytes
>>>>> [canon_dr] cmd:>>
>>>>> [canon_dr] 000: 00 00 00 00 00 00 ......
>>>>> [canon_dr] do_scsi_cmd: finish
>>>>> [canon_dr] wait_scanner: finish
>>>>> [canon_dr] connect_fd: finish
>>>>> [canon_dr] init_inquire: start
>>>>> [canon_dr] do_scsi_cmd: start
>>>>> [canon_dr] cmd: writing 6 bytes
>>>>> [canon_dr] cmd:>>
>>>>> [canon_dr] 000: 12 00 00 00 30 00 ....0.
>>>>> [canon_dr] in: reading 48 bytes
>>>>> [canon_dr] in:<<
>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 20
>>>>> ........CANON
>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 20 DR-5060F
>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 20
>>>>> 011020010607
>>>>> [canon_dr] in: read 48 bytes
>>>>> [canon_dr] do_scsi_cmd: finish
>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version 0110 at
>>>>> /dev/sg2
>>>>> [canon_dr] init_inquire: finish
>>>>> [canon_dr] init_vpd: start
>>>>> [canon_dr] do_scsi_cmd: start
>>>>> [canon_dr] cmd: writing 6 bytes
>>>>> [canon_dr] cmd:>>
>>>>> [canon_dr] 000: 12 01 f0 00 1e 00 ......
>>>>> [canon_dr] in: reading 30 bytes
>>>>> [canon_dr] in:<<
>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 c8
>>>>> ....#.,.,..,.,..
>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00 .d............
>>>>> [canon_dr] in: read 30 bytes
>>>>> [canon_dr] do_scsi_cmd: finish
>>>>> [canon_dr] init_vpd: length=23
>>>>> [canon_dr] standard options
>>>>> [canon_dr] basic x res: 300 dpi
>>>>> [canon_dr] basic y res: 300 dpi
>>>>> [canon_dr] step x res: 1 dpi
>>>>> [canon_dr] step y res: 0 dpi
>>>>> [canon_dr] max x res: 300 dpi
>>>>> [canon_dr] max y res: 300 dpi
>>>>> [canon_dr] min x res: 200 dpi
>>>>> [canon_dr] min y res: 100 dpi
>>>>> [canon_dr] 60 dpi: 0
>>>>> [canon_dr] 75 dpi: 0
>>>>> [canon_dr] 100 dpi: 0
>>>>> [canon_dr] 120 dpi: 0
>>>>> [canon_dr] 150 dpi: 0
>>>>> [canon_dr] 160 dpi: 0
>>>>> [canon_dr] 180 dpi: 0
>>>>> [canon_dr] 200 dpi: 1
>>>>> [canon_dr] 240 dpi: 1
>>>>> [canon_dr] 300 dpi: 1
>>>>> [canon_dr] 320 dpi: 0
>>>>> [canon_dr] 400 dpi: 0
>>>>> [canon_dr] 480 dpi: 0
>>>>> [canon_dr] 600 dpi: 0
>>>>> [canon_dr] 800 dpi: 0
>>>>> [canon_dr] 1200 dpi: 0
>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>> [canon_dr] AWD: 0
>>>>> [canon_dr] CE Emphasis: 0
>>>>> [canon_dr] C Emphasis: 0
>>>>> [canon_dr] High quality: 0
>>>>> [canon_dr] grayscale: 1
>>>>> [canon_dr] halftone: 1
>>>>> [canon_dr] monochrome: 1
>>>>> [canon_dr] overflow: 0
>>>>> [canon_dr] init_vpd: finish
>>>>> [canon_dr] init_model: start
>>>>> [canon_dr] init_model: finish
>>>>> [canon_dr] init_panel: start
>>>>> [canon_dr] read_panel: start
>>>>> [canon_dr] read_panel: finish 0
>>>>> [canon_dr] send_panel: start
>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>> [canon_dr] init_panel: finish
>>>>> [canon_dr] init_user: start
>>>>> [canon_dr] init_user: finish
>>>>> [canon_dr] init_options: start
>>>>> [canon_dr] init_options: finish
>>>>> [canon_dr] disconnect_fd: start
>>>>> [canon_dr] disconnecting scsi device
>>>>> [canon_dr] disconnect_fd: finish
>>>>> [canon_dr] attach_one: finish
>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>> [canon_dr] sane_get_devices: finish
>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>> [canon_dr] connect_fd: start
>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>> [canon_dr] wait_scanner: start
>>>>> [canon_dr] do_scsi_cmd: start
>>>>> [canon_dr] cmd: writing 6 bytes
>>>>> [canon_dr] cmd:>>
>>>>> [canon_dr] 000: 00 00 00 00 00 00 ......
>>>>> [canon_dr] do_scsi_cmd: finish
>>>>> [canon_dr] wait_scanner: finish
>>>>> [canon_dr] connect_fd: finish
>>>>> [canon_dr] sane_open: finish
>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>> scanimage: output is not a file, exiting
>>>>> [canon_dr] sane_close: start
>>>>> [canon_dr] disconnect_fd: start
>>>>> [canon_dr] disconnecting scsi device
>>>>> [canon_dr] disconnect_fd: finish
>>>>> [canon_dr] image_buffers: start
>>>>> [canon_dr] image_buffers: finish
>>>>> [canon_dr] offset_buffers: start
>>>>> [canon_dr] offset_buffers: finish
>>>>> [canon_dr] gain_buffers: start
>>>>> [canon_dr] gain_buffers: finish
>>>>> [canon_dr] sane_close: finish
>>>>> [canon_dr] sane_exit: start
>>>>> [canon_dr] disconnect_fd: start
>>>>> [canon_dr] disconnect_fd: finish
>>>>> [canon_dr] sane_exit: finish
>>>>>
>>>>> Any idea ?
>>>>>
>>>>> Christophe.
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen
>>>>>
>>>>> --
>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> "The truth is an offense, but not a sin"
>>>>
>>>
>>>
>>>
>>
>>
>> --
>> Christophe Largeau
>> Alixen
>>
>
>
>
--
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
More information about the sane-devel
mailing list