[sane-devel] Card Scanning Solutions ScanShell 800

[cssn scanner]

I have this scanner and want to get it working with SANE on Fedora 11+.

sane-find-scanner finds the scanner but that's as far as I got. Any help 
would be appreciated and I can help with output...I'm just not much of a 
programmer(but will give it a shot).




<device descriptor of 0x0a82/0x6604 at 005:002 (Card Scanning Solutions 
CSSN-SCANSHELL 800)>
bLength               18
bDescriptorType       1
bcdUSB                1.00
bDeviceClass          0
bDeviceSubClass       0
bDeviceProtocol       0
bMaxPacketSize0       8
idVendor              0x0A82
idProduct             0x6604
bcdDevice             1.00
iManufacturer         64 (Card Scanning Solutions)
iProduct              113 (CSSN-SCANSHELL 800)
iSerialNumber         0 ()
bNumConfigurations    1
<configuration 0>
  bLength              9
  bDescriptorType      2
  wTotalLength         39
  bNumInterfaces       1
  bConfigurationValue  1
  iConfiguration       0 ()
  bmAttributes         160 (Remote Wakeup)
  MaxPower             500 mA
<interface 0>
<altsetting 0>
    bLength            9
    bDescriptorType    4
    bInterfaceNumber   0
    bAlternateSetting  0
    bNumEndpoints      3
    bInterfaceClass    255
    bInterfaceSubClass 0
    bInterfaceProtocol 255
    iInterface         0 ()
<endpoint 0>
     bLength           7
     bDescriptorType   5
     bEndpointAddress  0x81 (in 0x01)
     bmAttributes      3 (interrupt)
     wMaxPacketSize    1
     bInterval         16 ms
     bRefresh          0
     bSynchAddress     0
<endpoint 1>
     bLength           7
     bDescriptorType   5
     bEndpointAddress  0x82 (in 0x02)
     bmAttributes      2 (bulk)
     wMaxPacketSize    64
     bInterval         0 ms
     bRefresh          0
     bSynchAddress     0
<endpoint 2>
     bLength           7
     bDescriptorType   5
     bEndpointAddress  0x03 (out 0x03)
     bmAttributes      2 (bulk)
     wMaxPacketSize    64
     bInterval         0 ms
     bRefresh          0
     bSynchAddress     0

<trying to find out which USB chip is used>
     checking for GT-6801 ...
     this is not a GT-6801 (bDeviceClass = 0)
     checking for GT-6816 ...
     this is not a GT-6816 (bcdUSB = 0x100)
     checking for GT-8911 ...
     this is not a GT-8911 (check 2, bcdUSB = 0x100)
     checking for MA-1017 ...
     this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
     checking for MA-1015 ...
     this is not a MA-1015 (bDeviceClass = 0)
     checking for MA-1509 ...
     this is not a MA-1509 (bDeviceClass = 0)
     checking for LM983[1,2,3] ...
<This USB chip looks like a LM9832/3 (result from sane-backends 1.0.20)>

found USB scanner (vendor=0x0a82 [Card Scanning Solutions], 
product=0x6604 [CSSN-SCANSHELL 800], chip=LM9832/3) at libusb:005:002






scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).