[sane-devel] Canon PIXMA MX870

[Nicolas Martin]

Not sure either wha

2010/7/22 Matthias Pannek <matthias at pannek.de>

> On Thu, 22 Jul 2010 07:45:52 +0200
> Nicolas Martin <nicolas0martin at gmail.com> wrote:
>
> > > Yeah, i can try it with via USB. Any special parameter needed for
> > > that?
> >
> > Nothing special, test it the same way as you did with network
> > connexion.
> > USB might require you to set some perms or udev rule tweak, so that
> > you can scan as normal user (often usb perms are natively given only
> > to root).
>
> I could scan.....but there is a problem with usblp:
>
> $ scanimage -L
> device `pixma:04A91743_3052EF' is a CANON Canon PIXMA MX870
> multi-function peripheral
>
> $ scanimage -T
> scanimage: scanning image of size 638x877 pixels at 24 bits/pixel
> scanimage: acquiring RGB frame, 8 bits/sample
> scanimage: reading one scanline, 1914 bytes...  FAIL Error: Error
> during device I/O
>
> $ dmesg |tail -1
> [ 5880.817977] usb 2-1.5: usbfs: interface 1 claimed by usblp while
> 'scanimage' sets config #1
>
> I found many threads about this, but not sure what's wrong :(
>
> > In the meantime, I'll commit those first changes for MX870, this will
> > be easier then to investigate the ADF empty issue
>
> Thanks :-)
>
> Matthias
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100722/595ca4c2/attachment.htm>