[sane-devel] problem with canoscan 5600F

[stef]

Le vendredi 30 juillet 2010 02:11:37 Jeff, vous avez écrit :
> How about as root so that last error doesn't happen!  Sorry ...
> 
> x at x:~# lsusb -d 04a9:1906 -v
> 
> Bus 001 Device 005: ID 04a9:1906 Canon, Inc.
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass          255 Vendor Specific Class
>   bDeviceSubClass       255 Vendor Specific Subclass
>   bDeviceProtocol       255 Vendor Specific Protocol
>   bMaxPacketSize0        64
>   idVendor           0x04a9 Canon, Inc.
>   idProduct          0x1906
>   bcdDevice            6.03
>   iManufacturer           1 Canon
>   iProduct                2 CanoScan
>   iSerial                 0
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           39
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0
>     bmAttributes         0xc0
>       Self Powered
>     MaxPower               10mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           3
>       bInterfaceClass       255 Vendor Specific Class
>       bInterfaceSubClass    255 Vendor Specific Subclass
>       bInterfaceProtocol    255 Vendor Specific Protocol
>       iInterface              0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval               0
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x83  EP 3 IN
>         bmAttributes            3
>           Transfer Type            Interrupt
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0001  1x 1 bytes
>         bInterval               8
> Device Qualifier (for other device speed):
>   bLength                10
>   bDescriptorType         6
>   bcdUSB               2.00
>   bDeviceClass          255 Vendor Specific Class
>   bDeviceSubClass       255 Vendor Specific Subclass
>   bDeviceProtocol       255 Vendor Specific Protocol
>   bMaxPacketSize0        64
>   bNumConfigurations      1
> Device Status:     0x0001
>   Self Powered
> 
	Hello,

	this look like a gl847 scanner. I'll will clone the LiDE 200 entry in the 
genesys backend using 5600F usb id this week-end, so you can compile and try 
to use your scanner.

Regards,
	Stef