[sane-devel] Epson GT 7000

[Jean-Joël Bataille]

The epkowa backend was not installed on my old version of ubuntu. 

But my problem was resolved by changing the file /etc/sane.d /dll.conf
 
In this file I desactivated use of epson2 backend and I speeded up 
use of epson backend.

Joël

Le vendredi 28 mai 2010 16:14:24, m. allan noah a écrit :
> perhaps your old version of ubuntu had the epkowa backend 
installed?
> 
> allan
> 
> 2010/5/27 Joël <jj.bataille at free.fr>:
> > Hi
> > 
> > Sane acknowledged perfectly my scanner Epson GT 7000 and it 
up to
> > the version 9.10 of Ubuntu.
> > With the version 10.04 of Ubuntu the scanner is acknowledged 
as a
> > generic scanner.
> > 
> > Here is the answer of scanimage:
> > 
> >  **********
> > joel at Fixe:~$ scanimage -L
> > device `epson2:/dev/sg2' is a Epson generic flatbed scanner
> > joel at Fixe:~$ scanimage --version
> > scanimage (sane-backends) 1.0.20; backend version 1.0.20
> > 
> >  **********
> > 
> > 
> > **********
> > joel at Fixe:~$ sane-find-scanner
> > 
> >  # sane-find-scanner will now attempt to detect your scanner. If 
the
> >  # result is different from what you expected, first make sure your
> >  # scanner is powered up and properly connected to your 
computer.
> > 
> > found SCSI processor "EPSON SCANNER GT-7000 1.14" at 
/dev/sg2
> >  # Your SCSI scanner was detected. It may or may not be 
supported
> > by SANE. Try
> >  # scanimage -L and read the backend's manpage......
> > **********
> > 
> > Consequence is that I can use the scanner only in it's basic
> > functions. Particularly I cannot use the adapter any more for 
negative
> > and slides because alone the flatbed source is offered.
> > 
> > Thank you for your help
> > 
> > J-Joël
> > 
> > 
> > 
> > 
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe 
your_password"
> >             to sane-devel-request at lists.alioth.debian.org