[sane-devel] HP ScanJet 5590 on Debian Lenny PPC

[Rémi Maréchal]

> That is a very old version of sane-backends. I do not know if it will
> help, but an upgrade would be a good start.

I have same error with sane-backends 1.0.21

imac:~/pkg/sane-frontends-1.0.14# /usr/local/bin/scanimage -L
[sanei_debug] Setting debug level of hp5590 to 50.
[hp5590] SANE backed for HP ScanJet 4500C/4570C/5500C/5550C/5590/7650 1.0.5
[hp5590] (c) Ilia Sotnikov <hostcc at gmail.com>
[hp5590] attach_usb_device: Opening USB device
[hp5590] attach_usb_device: USB device opened
[hp5590] hp5590_init_scanner
[hp5590] hp5590_cmd: USB-in-USB: command : 0012
[hp5590] hp5590_control_msg: USB-in-USB: core data: no
[hp5590] hp5590_control_msg: USB-in-USB: sending control msg
[hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for
control message
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_control_msg: USB-in-USB: checking if confirmation was
acknowledged
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: accepted
[hp5590] hp5590_verify_last_cmd: USB-in-USB: command verification requested
[hp5590] hp5590_control_msg: USB-in-USB: core data: no
[hp5590] hp5590_control_msg: USB-in-USB: sending control msg
[hp5590] hp5590_control_msg: USB-in-USB: checking acknowledge for
control message
[hp5590] hp5590_get_ack
[hp5590] hp5590_get_ack: USB-in-USB: error getting acknowledge
[hp5590] sane_hp5590_get_devices, local only: 0
[hp5590] Found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[hp5590] sane_hp5590_exit

imac:~/pkg/sane-frontends-1.0.14# /usr/local/bin/scanimage --version
scanimage (sane-backends) 1.0.21; backend version 1.0.21