[sane-devel] Canon PIXMA MX350

[Guenther Hutzl]

Hello!

I have a Canon PIXMA MX350 Multifunction device and found out that the
scanner in this model is not yet supported by the sane-pixma driver. Is
there anybody out there who could help me getting it to work with my
scanner?

I am running gentoo linux and I use sane-backends-1.0.21. Could anyone
please tell me what patches I need to make to the code to at least try
if the scanner just works with the existing driver? At the moment the
scanner is not recognized although the printer is detected in the network:

[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] Found scanner at ip address: 192.168.1.88
[pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added
before, good!
[pixma] Found scanner at ip address: 192.168.1.88
[pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added
before, good!
[pixma] Found scanner at ip address: 192.168.1.88
[pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added
before, good!
[pixma] Found scanner at ip address: 192.168.1.88
[pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added
before, good!
[pixma] Found scanner at ip address: 192.168.1.88
[pixma] Scanner at bjnp://192.168.1.88:8612 detected, but it was added
before, good!
[pixma] pixma_find_scanners() found 0 devices

I am running linux only so I cannot make usb traces but I have a vmware
player virtual machine running with Windows XP if that helps in creating
usb traces. I also have access to a macbook if one can do usb traces
using a mac.

Any help is appreciated. Thanks in advance,

Guenther.