[sane-devel] canon dr-9050c doesn't work

[Luigi Carbone]

In /etc/sane.d/.dll.conf "canon_dr" is listed,

The result of command SANE_DEBUG_DLL=255 scanimage -L 2>9050.log on 
terminal is

sudo SANE_DEBUG_DLL=255 scanimage -L 2 > 9050.log
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.12 from sane-backends 1.0.21
[dll] sane_init/read_dlld: processing /usr/local/etc/sane.d/dll.d ...
[dll] sane_init/read_dlld: done.
[dll] sane_init/read_config: Couldn't open config file (dll.conf): No 
such file or directory
[dll] sane_get_devices
[dll] sane_get_devices: found 0 devices
[dll] sane_exit: exiting
[dll] sane_exit: finished

but the 9050.log is attach.

TKS

Il 19/11/2010 14:26, m. allan noah ha scritto:
> The canon_dr backend is not enabled. check /etc/sane.d/dll.conf, and
> make sure 'canon_dr' is listed there.
>
> If it is listed, then try this:
>
> SANE_DEBUG_DLL=255 scanimage -L 2>9050.log
>
> and send that log.
>
> allan
>
> On Fri, Nov 19, 2010 at 7:56 AM, Luigi Carbone<lg.carbone at gmail.com>  wrote:
>> Mmh, it's same.
>>
>> The log file is attach.
>>
>> Luigi
>>
>> Il 19/11/2010 13:33, m. allan noah ha scritto:
>>>
>>> Ok- as root, run this:
>>>
>>> SANE_DEBUG_CANON_DR=30 scanimage -L 2>9050.log
>>>
>>> then send 9050.log to the list.
>>>
>>> allan
>>>
>>> On Fri, Nov 19, 2010 at 2:03 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>   wrote:
>>>>
>>>> With a privileges root, this is the result
>>>>
>>>> No scanners were identified. If you were expecting something different,
>>>> check that the scanner is plugged in, turned on and detected by the
>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>> which came with this software (README, FAQ, manpages).
>>>>
>>>> :(
>>>>
>>>> Il 18/11/2010 14:20, m. allan noah ha scritto:
>>>>>
>>>>> as root, run the following command, and send output to us:
>>>>>
>>>>> scanimage -L
>>>>>
>>>>> allan
>>>>>
>>>>> On Thu, Nov 18, 2010 at 7:57 AM, Luigi Carbone<lg.carbone at gmail.com>
>>>>>   wrote:
>>>>>>
>>>>>> Hi all,
>>>>>> I have problem with scanner canon dr-9050C, i have ubuntu 10.04 and
>>>>>> installated driver san version 1.0.21.
>>>>>>
>>>>>> I have configured file canon_dr.conf so
>>>>>> # DR-9050C
>>>>>> usb 0x1083 0x1622
>>>>>>
>>>>>> the command lsusb returns
>>>>>>
>>>>>> Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 003 Device 002: ID 046d:c505 Logitech, Inc. Cordless Mouse+Keyboard
>>>>>> Receiver
>>>>>> Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
>>>>>> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>> Bus 001 Device 004: ID 152e:2507 LG (HLDS)
>>>>>> Bus 001 Device 003: ID 1083:1622 Canon Electronics, Inc.
>>>>>> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
>>>>>>
>>>>>> the scanner is visible to the system...
>>>>>>
>>>>>> Help me.
>>>>>> --
>>>>
>>
>>
>
>
>


-- 
Luigi Carbone
----------------------
Owner @ http://www.ingenioweb.it
Web Designer @ www.consulenti-ict.it
CV: http://www.linkedin.com/in/carboneluigi
Skype: corsaro832
Cell: 340 32 15 783
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9050.log
Type: text/x-log
Size: 267 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20101122/dc43410c/attachment.bin>