[sane-devel] Canon CanoScan 9000F (similar to 8800F) supported by sane?
Al Bogner
sane at ml093.pinguin.uni.cc
Mon Sep 6 11:34:18 UTC 2010
Am Di, 08 Jun 2010 12:58:49 CEST schrieb m. allan noah:
Hi Allen,
> Al- you would need to get a USB sniffer log of the machine making a
> low resolution scan of a small area, and send a compressed copy of
> that log to this list. Someone here (Gernot, Nicolas) should be able
> to quickly determine if it uses the same protocol.
>
> http://www.pcausa.com/Utilities/UsbSnoop/
>
> allan
I got a CanoScan 9000F for a short test. I don't know exactly how long
I can test it, maybe a week or so.
Unfortunately I am far away to get the scanner working.
First I tried to use the driver for the 8800F with Opensuse
11.2, but the driver cannot be found with the yast scanner-installation.
Is there a repo for Opensuse 11.2 which contains the 8800F driver? I
would like to try, if I can use it with the 9000F.
uname -r
2.6.31.12-0.2-default
rpm -qa | grep -i sane
xsane-0.997-11.1.i586
sane-backends-1.0.20-8.3.i586
sane-backends-autoconfig-1.0.20-8.3.i586
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
hwinfo --short
cpu:
AMD Athlon(tm) XP 2400+, 2000 MHz
keyboard:
/dev/input/event0 AT Translated Set 2 keyboard
mouse:
/dev/input/mice ImExPS/2 Generic Explorer Mouse
monitor:
Generic Monitor
graphics card:
nVidia GeForce2 MX/MX 400
sound:
Trident Microsystems 4DWave NX
VIA Hoontech ST Audio DSP 24
storage:
Floppy disk controller
VIA VT6420 SATA RAID Controller
VIA VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus
Master IDE network:
eth0 D-Link DFE-530TX rev A
network interface:
lo Loopback network interface
eth0 Ethernet network interface
disk:
/dev/sda IC35L120AVV207-1
partition:
/dev/sda1 Partition
/dev/sda2 Partition
/dev/sda5 Partition
/dev/sda6 Partition
/dev/sda7 Partition
/dev/sda8 Partition
/dev/sda9 Partition
/dev/sda10 Partition
cdrom:
/dev/sr0 TOSHIBA DVD-ROM SD-M1612
floppy:
/dev/fd0 Floppy Disk
usb controller:
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA VT82xxxxx UHCI USB 1.1 Controller
VIA USB 2.0
bios:
BIOS
bridge:
VIA VT8377 [KT400/KT600 AGP] Host Bridge
VIA VT8237/VX700 PCI Bridge
VIA VT8235 ISA Bridge
hub:
Linux 2.6.31.12-0.2-default ehci_hcd EHCI Host
Controller Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller
Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host
Controller Linux 2.6.31.12-0.2-default uhci_hcd UHCI Host Controller
memory:
Main Memory
unknown:
FPU
DMA controller
PIC
Timer
Keyboard controller
/dev/lp0 Parallel controller
PS/2 Controller
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
Unclassified device
/dev/ttyS0 16550A
/dev/ttyS1 16550A
With Windows XP, I installed 9000fwin1601ea24.exe
The readme says, it installed a Twain driver.
StarOffice 5.2 doesn't recognize the Scanner.
Any suggestion for Windows XP, that the scanner is recognized by the
system? I don't want to install the packaged software, which came with
the driver.
I can't see the scanner with usbsnoop. I attach a screenshot. If the
screenshot is removed in the mail, let me know and I upload it on my
webspace.
I ask you very kindly for a quick response, because I have to give the
scanner back very soon.
Al
PS: Sorry for the email with the noreply-address
> On Sun, Jun 6, 2010 at 5:35 AM, Al Bogner <sane at ml093.pinguin.uni.cc>
> wrote:
> > Is the Canon CanoScan 9000F supported by sane?
> >
> > The CanoScan 9000F
> > http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=120&modelid=20411
> > seems to be very similar to the 8800F, which is supported according
> > http://www.sane-project.org/sane-mfgs.html#Z-CANON
> >
> > The only difference I found:
> >
> > 9000F:
> > Max. Resolutions
> > Optical: 3 9600 x 9600 dpi (film) / 4800 x 4800 (all other
> > media) Interpolated: Interpolated: 19,200 x 19,200 dpi
> > Scanning Mode
> > Color: 48-bit internal/48 or 24-bit external
> > Grayscale: 48-bit internal/16-bit (film scanning only)/8-bit
> > external
> >
> > 8800F:
> > Max. Resolutions
> > Optical: 4800 x 9600 dpi
> > Interpolated: 19,200 x 19,200 dpi
> > Scanning Mode
> > Color: 48-bit internal / 48-bit external (selectable in
> > driver) Grayscale: 48-bit internal / 8-bit external/16-bit internal
> > (for film scanning only)
> >
> > If there is no knowledge of the 9000F re sane, which info could I
> > give you, if I can test this model a little bit?
> >
> > Al
> >
> > --
> > sane-devel mailing list: sane-devel at lists.alioth.debian.org
> > http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> > Unsubscribe: Send mail with subject "unsubscribe your_password"
> > to sane-devel-request at lists.alioth.debian.org
> >
>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: usb_sniffer.png
Type: image/png
Size: 42526 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20100906/bdf164ed/attachment-0001.png>
More information about the sane-devel
mailing list