[sane-devel] SANE unsupported device

Thu Sep 23 12:49:49 UTC 2010

Looks more like a camera than a scanner. You might try the gphoto guys
and see if it looks familiar to them.

allan

On Thu, Sep 16, 2010 at 8:47 AM, B. Ferdinand <b.ferdi at gmx.net> wrote:
> Type: reflecta X²-Scan
>
> Device:
>
> Image sensor : CMOS
>
> Colour depth : 24 bit
>
> Resolution : 5 Mp = 1800 ppi
>
> Scan range : max. 24,3 x 36,5 mm
>
> Contrast : 3.0 Dmax
>
> Connector : USB2.0 (comp. with USB1.1)
>
> List output - # sane-find-scanner -v -v
>
> This is sane-find-scanner from sane-backends 1.0.20
>
> # sane-find-scanner will now attempt to detect your scanner. If the
>
> # result is different from what you expected, first make sure your
>
> # scanner is powered up and properly connected to your computer.
>
> searching for SCSI scanners:
>
> checking /dev/scanner... failed to open (Invalid argument)
>
> checking /dev/sg0... failed to open (Invalid argument)
>
> checking /dev/sg1... failed to open (Invalid argument)
>
> checking /dev/sg2... failed to open (Invalid argument)
>
> checking /dev/sg3... failed to open (Invalid argument)
>
> checking /dev/sg4... failed to open (Invalid argument)
>
> checking /dev/sg5... failed to open (Invalid argument)
>
> checking /dev/sg6... failed to open (Invalid argument)
>
> checking /dev/sg7... failed to open (Invalid argument)
>
> checking /dev/sg8... failed to open (Invalid argument)
>
> checking /dev/sg9... failed to open (Invalid argument)
>
> checking /dev/sga... failed to open (Invalid argument)
>
> checking /dev/sgb... failed to open (Invalid argument)
>
> checking /dev/sgc... failed to open (Invalid argument)
>
> checking /dev/sgd... failed to open (Invalid argument)
>
> checking /dev/sge... failed to open (Invalid argument)
>
> checking /dev/sgf... failed to open (Invalid argument)
>
> checking /dev/sgg... failed to open (Invalid argument)
>
> checking /dev/sgh... failed to open (Invalid argument)
>
> checking /dev/sgi... failed to open (Invalid argument)
>
> checking /dev/sgj... failed to open (Invalid argument)
>
> checking /dev/sgk... failed to open (Invalid argument)
>
> checking /dev/sgl... failed to open (Invalid argument)
>
> checking /dev/sgm... failed to open (Invalid argument)
>
> checking /dev/sgn... failed to open (Invalid argument)
>
> checking /dev/sgo... failed to open (Invalid argument)
>
> checking /dev/sgp... failed to open (Invalid argument)
>
> checking /dev/sgq... failed to open (Invalid argument)
>
> checking /dev/sgr... failed to open (Invalid argument)
>
> checking /dev/sgs... failed to open (Invalid argument)
>
> checking /dev/sgt... failed to open (Invalid argument)
>
> checking /dev/sgu... failed to open (Invalid argument)
>
> checking /dev/sgv... failed to open (Invalid argument)
>
> checking /dev/sgw... failed to open (Invalid argument)
>
> checking /dev/sgx... failed to open (Invalid argument)
>
> checking /dev/sgy... failed to open (Invalid argument)
>
> checking /dev/sgz... failed to open (Invalid argument)
>
> # No SCSI scanners found. If you expected something different, make sure
> that
>
> # you have loaded a kernel SCSI driver for your SCSI adapter.
>
> searching for USB scanners:
>
> checking /dev/usb/scanner... failed to open (Invalid argument)
>
> checking /dev/usb/scanner0... failed to open (Invalid argument)
>
> checking /dev/usb/scanner1... failed to open (Invalid argument)
>
> checking /dev/usb/scanner2... failed to open (Invalid argument)
>
> checking /dev/usb/scanner3... failed to open (Invalid argument)
>
> checking /dev/usb/scanner4... failed to open (Invalid argument)
>
> checking /dev/usb/scanner5... failed to open (Invalid argument)
>
> checking /dev/usb/scanner5... failed to open (Invalid argument)
>
> checking /dev/usb/scanner7... failed to open (Invalid argument)
>
> checking /dev/usb/scanner8... failed to open (Invalid argument)
>
> checking /dev/usb/scanner9... failed to open (Invalid argument)
>
> checking /dev/usb/scanner10... failed to open (Invalid argument)
>
> checking /dev/usb/scanner11... failed to open (Invalid argument)
>
> checking /dev/usb/scanner12... failed to open (Invalid argument)
>
> checking /dev/usb/scanner13... failed to open (Invalid argument)
>
> checking /dev/usb/scanner14... failed to open (Invalid argument)
>
> checking /dev/usb/scanner15... failed to open (Invalid argument)
>
> checking /dev/usbscanner... failed to open (Invalid argument)
>
> checking /dev/usbscanner0... failed to open (Invalid argument)
>
> checking /dev/usbscanner1... failed to open (Invalid argument)
>
> checking /dev/usbscanner2... failed to open (Invalid argument)
>
> checking /dev/usbscanner3... failed to open (Invalid argument)
>
> checking /dev/usbscanner4... failed to open (Invalid argument)
>
> checking /dev/usbscanner5... failed to open (Invalid argument)
>
> checking /dev/usbscanner6... failed to open (Invalid argument)
>
> checking /dev/usbscanner7... failed to open (Invalid argument)
>
> checking /dev/usbscanner8... failed to open (Invalid argument)
>
> checking /dev/usbscanner9... failed to open (Invalid argument)
>
> checking /dev/usbscanner10... failed to open (Invalid argument)
>
> checking /dev/usbscanner11... failed to open (Invalid argument)
>
> checking /dev/usbscanner12... failed to open (Invalid argument)
>
> checking /dev/usbscanner13... failed to open (Invalid argument)
>
> checking /dev/usbscanner14... failed to open (Invalid argument)
>
> checking /dev/usbscanner15... failed to open (Invalid argument)
>
> trying libusb:
>
> <device descriptor of 0x1d6b/0x0002 at 001:001 (Linux 2.6.31.12-0.2-desktop
> ehci_hcd EHCI Host Controller)>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 2.00
>
> bDeviceClass 9
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x1D6B
>
> idProduct 0x0002
>
> bcdDevice 2.06
>
> iManufacturer 3 (Linux 2.6.31.12-0.2-desktop ehci_hcd)
>
> iProduct 2 (EHCI Host Controller)
>
> iSerialNumber 1 (0000:00:02.1)
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 25
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 224 (Self-poweredRemote Wakeup)
>
> MaxPower 0 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 1
>
> bInterfaceClass 9
>
> bInterfaceSubClass 0
>
> bInterfaceProtocol 0
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 4
>
> bInterval 12 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <device descriptor of 0x04e8/0x342a at 001:004 (Samsung Electronics Co.,
> Ltd. CLX-3170 Series)>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 2.00
>
> bDeviceClass 0
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x04E8
>
> idProduct 0x342A
>
> bcdDevice 1.00
>
> iManufacturer 1 (Samsung Electronics Co., Ltd.)
>
> iProduct 2 (CLX-3170 Series)
>
> iSerialNumber 3 (14AUBxxxxxxxxxx)
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 55
>
> bNumInterfaces 2
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 192 (Self-powered)
>
> MaxPower 2 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 2
>
> bInterfaceClass 255
>
> bInterfaceSubClass 255
>
> bInterfaceProtocol 255
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x03 (out 0x03)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x84 (in 0x04)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <interface 1>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 1
>
> bAlternateSetting 0
>
> bNumEndpoints 2
>
> bInterfaceClass 7
>
> bInterfaceSubClass 1
>
> bInterfaceProtocol 2
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x01 (out 0x01)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x82 (in 0x02)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
>
> checking for GT-6801 ...
>
> this is not a GT-6801 (bDeviceClass = 0)
>
> checking for GT-6816 ...
>
> this is not a GT-6816 (bcdUSB = 0x200)
>
> checking for GT-8911 ...
>
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
>
> checking for MA-1017 ...
>
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for MA-1015 ...
>
> this is not a MA-1015 (bDeviceClass = 0)
>
> checking for MA-1509 ...
>
> this is not a MA-1509 (bDeviceClass = 0)
>
> checking for LM983[1,2,3] ...
>
> this is not a LM983x (bcdUSB = 0x200)
>
> checking for GL646 ...
>
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL646_HP ...
>
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL660+GL646 ...
>
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL84x ...
>
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for ICM532B ...
>
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for PV8630/LM9830 ...
>
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
>
> checking for M011 ...
>
> this is not a M011 (bDeviceClass = 0)
>
> checking for RTS8822 ...
>
> this is not a RTS8822 (bNumEndpoints = 2)
>
> checking for rts8858c ...
>
> this is not a rts8858c (bcdUSB = 0x200)
>
> checking for SQ113 ...
>
> this is not a SQ113 (bNumEndpoints = 2)
>
> checking for HP5550/5590/7650 chipset ...
>
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>
> checking for rts8801/rts8891 ...
>
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
>
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.20)>
>
> found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.],
> product=0x342a [CLX-3170 Series]) at libusb:001:004
>
> <device descriptor of 0x05e3/0x0710 at 001:005 (USB Storage)>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 2.00
>
> bDeviceClass 0
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x05E3
>
> idProduct 0x0710
>
> bcdDevice 145.44
>
> iManufacturer 0 ()
>
> iProduct 1 (USB Storage)
>
> iSerialNumber 2 (000000009xxx)
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 32
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 128 ()
>
> MaxPower 500 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 2
>
> bInterfaceClass 8
>
> bInterfaceSubClass 6
>
> bInterfaceProtocol 80
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 0 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x02 (out 0x02)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 512
>
> bInterval 0 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <device descriptor of 0x05a9/0x1550 at 001:061 (FW-07.07.25 USB Camera)>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 2.00
>
> bDeviceClass 0
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x05A9
>
> idProduct 0x1550
>
> bcdDevice 1.00
>
> iManufacturer 1 (FW-07.07.25)
>
> iProduct 2 (USB Camera)
>
> iSerialNumber 0 ()
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 55
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 128 ()
>
> MaxPower 500 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 2
>
> bInterfaceClass 255
>
> bInterfaceSubClass 0
>
> bInterfaceProtocol 0
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x83 (in 0x03)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 4
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 1 (isochronous)
>
> wMaxPacketSize 0
>
> bInterval 1 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <altsetting 1>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 1
>
> bNumEndpoints 2
>
> bInterfaceClass 255
>
> bInterfaceSubClass 0
>
> bInterfaceProtocol 0
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x83 (in 0x03)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 4
>
> bInterval 10 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 1 (isochronous)
>
> wMaxPacketSize 5116
>
> bInterval 1 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
>
> checking for GT-6801 ...
>
> this is not a GT-6801 (bDeviceClass = 0)
>
> checking for GT-6816 ...
>
> this is not a GT-6816 (bcdUSB = 0x200)
>
> checking for GT-8911 ...
>
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
>
> checking for MA-1017 ...
>
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for MA-1015 ...
>
> this is not a MA-1015 (bDeviceClass = 0)
>
> checking for MA-1509 ...
>
> this is not a MA-1509 (bDeviceClass = 0)
>
> checking for LM983[1,2,3] ...
>
> this is not a LM983x (bcdUSB = 0x200)
>
> checking for GL646 ...
>
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL646_HP ...
>
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL660+GL646 ...
>
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL84x ...
>
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for ICM532B ...
>
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for PV8630/LM9830 ...
>
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
>
> checking for M011 ...
>
> this is not a M011 (bDeviceClass = 0)
>
> checking for RTS8822 ...
>
> this is not a RTS8822 (bNumEndpoints = 2)
>
> checking for rts8858c ...
>
> this is not a rts8858c (bcdUSB = 0x200)
>
> checking for SQ113 ...
>
> this is not a SQ113 (bInterfaceSubClass = 0)
>
> checking for HP5550/5590/7650 chipset ...
>
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>
> checking for rts8801/rts8891 ...
>
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
>
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.20)>
>
> found USB scanner (vendor=0x05a9 [FW-07.07.25], product=0x1550 [USB Camera])
> at libusb:001:061
>
> <device descriptor of 0x1d6b/0x0001 at 002:001 (Linux 2.6.31.12-0.2-desktop
> ohci_hcd OHCI Host Controller)>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 1.10
>
> bDeviceClass 9
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x1D6B
>
> idProduct 0x0001
>
> bcdDevice 2.06
>
> iManufacturer 3 (Linux 2.6.31.12-0.2-desktop ohci_hcd)
>
> iProduct 2 (OHCI Host Controller)
>
> iSerialNumber 1 (0000:00:02.0)
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 25
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 224 (Self-poweredRemote Wakeup)
>
> MaxPower 0 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 1
>
> bInterfaceClass 9
>
> bInterfaceSubClass 0
>
> bInterfaceProtocol 0
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 2
>
> bInterval 255 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <device descriptor of 0x045e/0x00ca at 002:002>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 2.00
>
> bDeviceClass 0
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 64
>
> idVendor 0x045E
>
> idProduct 0x00CA
>
> bcdDevice 1.00
>
> iManufacturer 1 ()
>
> iProduct 2 ()
>
> iSerialNumber 3 ()
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 32
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 128 ()
>
> MaxPower 260 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 2
>
> bInterfaceClass 255
>
> bInterfaceSubClass 255
>
> bInterfaceProtocol 255
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 64
>
> bInterval 8 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x82 (in 0x02)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 64
>
> bInterval 0 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
>
> checking for GT-6801 ...
>
> this is not a GT-6801 (bDeviceClass = 0)
>
> checking for GT-6816 ...
>
> this is not a GT-6816 (bcdUSB = 0x200)
>
> checking for GT-8911 ...
>
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
>
> checking for MA-1017 ...
>
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for MA-1015 ...
>
> this is not a MA-1015 (bDeviceClass = 0)
>
> checking for MA-1509 ...
>
> this is not a MA-1509 (bDeviceClass = 0)
>
> checking for LM983[1,2,3] ...
>
> this is not a LM983x (bcdUSB = 0x200)
>
> checking for GL646 ...
>
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL646_HP ...
>
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL660+GL646 ...
>
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL84x ...
>
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for ICM532B ...
>
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for PV8630/LM9830 ...
>
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
>
> checking for M011 ...
>
> this is not a M011 (bDeviceClass = 0)
>
> checking for RTS8822 ...
>
> this is not a RTS8822 (bNumEndpoints = 2)
>
> checking for rts8858c ...
>
> this is not a rts8858c (bcdUSB = 0x200)
>
> checking for SQ113 ...
>
> this is not a SQ113 (bNumEndpoints = 2)
>
> checking for HP5550/5590/7650 chipset ...
>
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>
> checking for rts8801/rts8891 ...
>
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
>
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.20)>
>
> found USB scanner (vendor=0x045e, product=0x00ca) at libusb:002:002
>
> <device descriptor of 0x0c4b/0x0100 at 002:003>
>
> bLength 18
>
> bDescriptorType 1
>
> bcdUSB 1.00
>
> bDeviceClass 0
>
> bDeviceSubClass 0
>
> bDeviceProtocol 0
>
> bMaxPacketSize0 16
>
> idVendor 0x0C4B
>
> idProduct 0x0100
>
> bcdDevice 1.00
>
> iManufacturer 0 ()
>
> iProduct 0 ()
>
> iSerialNumber 0 ()
>
> bNumConfigurations 1
>
> <configuration 0>
>
> bLength 9
>
> bDescriptorType 2
>
> wTotalLength 39
>
> bNumInterfaces 1
>
> bConfigurationValue 1
>
> iConfiguration 0 ()
>
> bmAttributes 160 (Remote Wakeup)
>
> MaxPower 96 mA
>
> <interface 0>
>
> <altsetting 0>
>
> bLength 9
>
> bDescriptorType 4
>
> bInterfaceNumber 0
>
> bAlternateSetting 0
>
> bNumEndpoints 3
>
> bInterfaceClass 255
>
> bInterfaceSubClass 0
>
> bInterfaceProtocol 0
>
> iInterface 0 ()
>
> <endpoint 0>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x81 (in 0x01)
>
> bmAttributes 3 (interrupt)
>
> wMaxPacketSize 16
>
> bInterval 5 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 1>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x82 (in 0x02)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 64
>
> bInterval 1 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <endpoint 2>
>
> bLength 7
>
> bDescriptorType 5
>
> bEndpointAddress 0x02 (out 0x02)
>
> bmAttributes 2 (bulk)
>
> wMaxPacketSize 64
>
> bInterval 1 ms
>
> bRefresh 0
>
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
>
> checking for GT-6801 ...
>
> this is not a GT-6801 (bDeviceClass = 0)
>
> checking for GT-6816 ...
>
> this is not a GT-6816 (bcdUSB = 0x100)
>
> checking for GT-8911 ...
>
> this is not a GT-8911 (check 2, bcdUSB = 0x100)
>
> checking for MA-1017 ...
>
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for MA-1015 ...
>
> this is not a MA-1015 (bDeviceClass = 0)
>
> checking for MA-1509 ...
>
> this is not a MA-1509 (bDeviceClass = 0)
>
> checking for LM983[1,2,3] ...
>
> this is not a LM983x (bEndpointAddress = 0x81, bmAttributes = 0x3,
> wMaxPacketSize = 0x10, bInterval = 0x5)
>
> checking for GL646 ...
>
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL646_HP ...
>
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL660+GL646 ...
>
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for GL84x ...
>
> this is not a GL841 (bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for ICM532B ...
>
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
>
> checking for PV8630/LM9830 ...
>
> this is not a PV8630/LM9830 (bEndpointAddress = 0x81, bmAttributes = 0x3,
> wMaxPacketSize = 0x10, bInterval = 0x5)
>
> checking for M011 ...
>
> this is not a M011 (bDeviceClass = 0)
>
> checking for RTS8822 ...
>
> this is not a RTS8822 (bcdUSB = 0x100)
>
> checking for rts8858c ...
>
> this is not a rts8858c (bcdUSB = 0x100)
>
> checking for SQ113 ...
>
> this is not a SQ113 (bcdUSB = 0x100)
>
> checking for HP5550/5590/7650 chipset ...
>
> this is not a HP5550/5590/7650 chipset (bDeviceClass = 0)
>
> checking for rts8801/rts8891 ...
>
> this is not a rts8801/rts8891 (bcdUSB = 0x100)
>
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.20)>
>
> found USB scanner (vendor=0x0c4b, product=0x0100) at libusb:002:003
>
> # Your USB scanner was (probably) detected. It may or may not be supported
> by
>
> # SANE. Try scanimage -L and read the backend's manpage.
>
> # Not checking for parallel port scanners.
>
> # Most Scanners connected to the parallel port or other proprietary ports
>
> # can't be detected by this program.
>
> done
>
> best regards
>
> B. Ferdinand
>
> -------------------------
>
> It is prohibited to publish my email address.
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
>             to sane-devel-request at lists.alioth.debian.org
>

-- 
"The truth is an offense, but not a sin"