[sane-devel] Scanning from fujitsu ScanSnap S1500 Error during device I/O

[Joachim Franek]

On Friday 04 February 2011 15:41:57 Markus Golser wrote:
> Hi I try to scan a document using my new scansnap S1500.
> 
> works: scanadf -d fujitsu --mode color
> works: scanadf -d fujitsu --mode lineart
> works: scanadf -d fujitsu --mode halftone
> works: scanadf -d fujitsu --source "ADF Duplex" --mode Lineart
> works: scanadf -d fujitsu --source "ADF Duplex" --mode Halftone
> 
> fails: scanadf -d fujitsu --source "ADF Duplex" --mode color
Try Color instead of color.

From help text: scanimage --help

Options specific to device `fujitsu:ScanSnap S1500:35552':
  Standard:
    --source ADF Front|ADF Back|ADF Duplex [ADF Front]
        Selects the scan source (such as a document-feeder).
    --mode Lineart|Halftone|Gray|Color [Lineart]
==============================
        Selects the scan mode (e.g., lineart, monochrome, or color).
    --resolution 50..600dpi (in steps of 1) [600]
        Sets the horizontal resolution of the scanned image.
    --y-resolution 50..600dpi (in steps of 1) [600]
        Sets the vertical resolution of the scanned image.



Joachim