[sane-devel] CanoScan 700F
Sebastian Reinhardt
snr at lmv-hartmannsdorf.de
Tue Feb 22 23:57:39 UTC 2011
Am 15.02.2011 21:36, schrieb stef:
> Le Tuesday 15 February 2011 18:06:00 Sebastian Reinhardt, vous avez écrit :
>> Am 12.02.2011 16:10, schrieb Thorsten Stumpf:
>>> Hello,
>>>
>>> genesys.log: run of xsane w/ usb traces
>>>
>>> thx for your good work!
>>>
>>> Regards
>>> Thorsten
>>>
>>> Am Freitag 11 Februar 2011, um 06:58:30 schrieb stef:
>>>> Le Thursday 10 February 2011 23:07:05 Sebastian Reinhardt, vous avez
>>>> écrit
>>>>
>>>> : ....
>>>>> -----------------------------------------------------------------------
>>>>> -- -- ----------------------------- Changing directory to:
>>>>>
>>>>> SNR at Dorsy1:~/Downloads/Sane/sane-backends-git20110209/backend>
>>>>>
>>>>> Then, as user:
>>>>>
>>>>> SNR at Dorsy1:~/Downloads/Sane/sane-backends-git20110209/backend>
>>>>> ./run-genesys.sh
>>>>>
>>>>> => No scanner found.
>>>>>
>>>>> -----------------------------------
>>>>> SNR at Dorsy1:~/Downloads/Sane/sane-backends-git20110209/backend> cat
>>>>> genesys.log
>>>>> [sanei_debug] Setting debug level of genesys to 255.
>>>>> [genesys] SANE Genesys backend version 1.0 build 63 from sane-backends
>>>>> 1.0.22git
>>>>> [genesys] sane_init: authorize != null
>>>>> [genesys] sane_init: little endian machine
>>>>> [genesys] probe_genesys_devices: start
>>>>> [genesys] probe_genesys_devices: exit
>>>>> [genesys] sane_init: exit
>>>>> [genesys] sane_get_devices: start: local_only = false
>>>>> [genesys] probe_genesys_devices: start
>>>>> [genesys] probe_genesys_devices: exit
>>>>> [genesys] sane_get_devices: exit
>>>>> [genesys] sane_exit: start
>>>>> [genesys] sane_exit: exit
>>>>>
>>>>> -----------------------------------------------------------------------
>>>>> -- -- ----------------------------- Now, root:
>>>>> -----------------------------------
>>>>> SNR at Dorsy1:~/Downloads/Sane/sane-backends-git20110209/backend> su
>>>>> Passwort:
>>>>> Dorsy1:/mnt/lvm/homes/SNR/Downloads/Sane/sane-backends-git20110209/back
>>>>> en d # ./run-genesys.sh
>>>>> Dorsy1:/mnt/lvm/homes/SNR/Downloads/Sane/sane-backends-git20110209/back
>>>>> en d # cat genesys.log
>>>>> [sanei_debug] Setting debug level of genesys to 255.
>>>>> [genesys] SANE Genesys backend version 1.0 build 63 from sane-backends
>>>>> 1.0.22git
>>>>> [genesys] sane_init: authorize != null
>>>>> [genesys] sane_init: little endian machine
>>>>> [genesys] probe_genesys_devices: start
>>>>> [genesys] probe_genesys_devices: exit
>>>>> [genesys] sane_init: exit
>>>>> [genesys] sane_get_devices: start: local_only = false
>>>>> [genesys] probe_genesys_devices: start
>>>>> [genesys] probe_genesys_devices: exit
>>>>> [genesys] sane_get_devices: exit
>>>>> [genesys] sane_exit: start
>>>>> [genesys] sane_exit: exit
>>>>>
>>>>> -----------------------------------------------------------------------
>>>>> -- -- -----------------------------
>>>>>
>>>>> That's it, so far. One difference between root or non-root is, that a
>>>>> additional small window is shown for one millisecond (can not see what
>>>>> it is) before the window with "no scanner found" is popping up!
>>>>>
>>>>> Compilation without error on this system:
>>>>>
>>>>> OS: openSuSE 11.3 (64bit)
>>>>> Kernel (uname -a): Linux Dorsy1.SNR 2.6.37-desktop #1 SMP PREEMPT
>>>>> 2011-01-11 16:25:30 +0100 x86_64 x86_64 x86_64 GNU/Linux
>>>>>
>>>>> Do Youn need more information or do I have to try it on an different
>>>>> system (I can do tests on some of our pc's in company, if I do not need
>>>>> to install sane-git! => differnet kernels available)
>>>>>
>>>> Hello,
>>>>
>>>> could you add the following export to the script ? It will enable USB
>>>>
>>>> traces:
>>>> export SANE_DEBUG_SANEI_USB=255
>>>>
>>>> Maybe libusb support isn't built in (check you have libusb-devel or
>>>>
>>>> better libusb_1.0-devel installed).
>>>>
>>>> Regards,
>>>>
>>>> Stef
>>>>
>>>> --
>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>
>>>> to sane-devel-request at lists.alioth.debian.org
>>> --
>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>
>>> to sane-devel-request at lists.alioth.debian.org
>> Ok, found one of my mistakes: missing libusb-devel and now I have
>> compiled the latest sane-backend (sane-backends-git20110215) with
>> configured libusb- support (./configure --enable-libusb_1_0).
>>
>> Now I have same problem as "normal" user: no scanner found. With root-
>> access I get: "Error while accessing device 'libusb:001:018': Unknown
>> argument" (Sorry if this is not the same like native english error
>> message, because I translated this from german error message! :-) )
>> Everytime I try to access the scanner as root, the device identifier is
>> increased after this error message (001:010 was displayed in first
>> message)!
>>
>> Now I got more output in logfile (take a look at attachted logfile)!
>>
>> What is next?
> Hello,
>
> the place where is fails is quite unusual. May be it is related to
> hardware. You might try another cable, or to plug the scanner on another USB
> port.
>
> Regards,
> Stef
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
Hello,
Sorry for the delay.... :-(
I tried it with two different pc's with different kernel versions
(2.6.37 and 2.6.34.7-0.7.1), but no chance...also I replaced the cable
and I scanned succesfully with "Winstone" on the same labtop that I
usually use.
The data about the labtop:
OS: openSUSE 11.3 (x86_64)
----------------------------------------------------------------------------------------------------------------------
uname -a:
Linux Dorsy1.SNR 2.6.37-desktop #1 SMP PREEMPT 2011-01-11 16:25:30 +0100
x86_64 x86_64 x86_64 GNU/Linux
----------------------------------------------------------------------------------------------------------------------
rpm -qa "*libusb*"
libusbmuxd-devel-1.0.6-34.2.x86_64
libusbmuxd1-1.0.6-34.2.x86_64
libusb-0_1-4-32bit-0.1.13-6.1.x86_64
libusb-0_1-4-0.1.13-6.1.x86_64
libusb-1_0-0-1.0.8-16.1.x86_64
libusb-1_0-0-32bit-1.0.8-16.1.x86_64
libusb-compat-devel-0.1.3-6.1.x86_64
libusbprog0-0.2.0-2.1.x86_64
libusb-1_0-devel-1.0.8-16.1.x86_64
----------------------------------------------------------------------------------------------------------------------
hwinfo:
usb device: name = 1-1:1.0
path = /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0
modalias = "usb:v04A9p1907d0603dcFFdscFFdpFFicFFiscFFipFF"
bInterfaceNumber = 0
bInterfaceClass = 255
bInterfaceSubClass = 255
bInterfaceProtocol = 255
if: 1-1:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb1/1-1
bDeviceClass = 255
bDeviceSubClass = 255
bDeviceProtocol = 255
idVendor = 0x04a9
idProduct = 0x1907
manufacturer = "Canon"
product = "CanoScan"
bcdDevice = 0603
speed = "480"
P: /devices/pci0000:00/0000:00:1d.7/usb1/1-1
N: bus/usb/001/011
S: char/189:10
E: UDEV_LOG=3
E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-1
E: SUBSYSTEM=usb
E: DEVNAME=bus/usb/001/011
E: ID_VENDOR=Canon
E: ID_VENDOR_ENC=Canon
E: ID_VENDOR_ID=04a9
E: ID_MODEL=CanoScan
E: ID_MODEL_ENC=CanoScan
E: ID_MODEL_ID=1907
E: ID_REVISION=0603
E: ID_SERIAL=Canon_CanoScan
E: ID_BUS=usb
E: ID_USB_INTERFACES=:ffffff:
E: MAJOR=189
E: MINOR=10
E: DEVTYPE=usb_device
E: DRIVER=usb
E: DEVICE=/proc/bus/usb/001/011
E: PRODUCT=4a9/1907/603
E: TYPE=255/255/255
E: BUSNUM=001
E: DEVNUM=011
E: DEVLINKS=/dev/char/189:10
----------------------------------------------------------------------------------------------------------------------
I attached a new log with usb-traces.
Was anyone able to scan sucessful any image with this scanner?
--
Regaards
Sebastian Reinhardt
-------------- next part --------------
A non-text attachment was scrubbed...
Name: genesys.log
Type: text/x-log
Size: 61621 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110223/355ced3f/attachment-0001.bin>
More information about the sane-devel
mailing list