[sane-devel] CanoScan 700F

[Sebastian Reinhardt]

Am 23.02.2011 07:05, schrieb stef:
> Le Wednesday 23 February 2011 00:57:39 Sebastian Reinhardt, vous avez écrit :
>> Am 15.02.2011 21:36, schrieb stef:
>>> Le Tuesday 15 February 2011 18:06:00 Sebastian Reinhardt, vous avez écrit 
> :
> ....
>>> --
>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>
>>>              to sane-devel-request at lists.alioth.debian.org
>> Hello,
>>
>> Sorry for the delay....   :-(
>>
>> I tried it with two different pc's with different kernel versions
>> (2.6.37 and 2.6.34.7-0.7.1), but no chance...also I replaced the cable
>> and I scanned succesfully with "Winstone" on the same labtop that I
>> usually use.
>>
>> The data about the labtop:
>> OS: openSUSE 11.3 (x86_64)
>> ---------------------------------------------------------------------------
>> ------------------------------------------- uname -a:
>> Linux Dorsy1.SNR 2.6.37-desktop #1 SMP PREEMPT 2011-01-11 16:25:30 +0100
>> x86_64 x86_64 x86_64 GNU/Linux
>> ---------------------------------------------------------------------------
>> ------------------------------------------- rpm -qa "*libusb*"
>> libusbmuxd-devel-1.0.6-34.2.x86_64
>> libusbmuxd1-1.0.6-34.2.x86_64
>> libusb-0_1-4-32bit-0.1.13-6.1.x86_64
>> libusb-0_1-4-0.1.13-6.1.x86_64
>> libusb-1_0-0-1.0.8-16.1.x86_64
>> libusb-1_0-0-32bit-1.0.8-16.1.x86_64
>> libusb-compat-devel-0.1.3-6.1.x86_64
>> libusbprog0-0.2.0-2.1.x86_64
>> libusb-1_0-devel-1.0.8-16.1.x86_64
>> ---------------------------------------------------------------------------
>> ------------------------------------------- hwinfo:
>> usb device: name = 1-1:1.0
>>     path = /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0
>>     modalias = "usb:v04A9p1907d0603dcFFdscFFdpFFicFFiscFFipFF"
>>     bInterfaceNumber = 0
>>     bInterfaceClass = 255
>>     bInterfaceSubClass = 255
>>     bInterfaceProtocol = 255
>>     if: 1-1:1.0 @ /devices/pci0000:00/0000:00:1d.7/usb1/1-1
>>     bDeviceClass = 255
>>     bDeviceSubClass = 255
>>     bDeviceProtocol = 255
>>     idVendor = 0x04a9
>>     idProduct = 0x1907
>>     manufacturer = "Canon"
>>     product = "CanoScan"
>>     bcdDevice = 0603
>>     speed = "480"
>>
>>  P: /devices/pci0000:00/0000:00:1d.7/usb1/1-1
>>   N: bus/usb/001/011
>>   S: char/189:10
>>   E: UDEV_LOG=3
>>   E: DEVPATH=/devices/pci0000:00/0000:00:1d.7/usb1/1-1
>>   E: SUBSYSTEM=usb
>>   E: DEVNAME=bus/usb/001/011
>>   E: ID_VENDOR=Canon
>>   E: ID_VENDOR_ENC=Canon
>>   E: ID_VENDOR_ID=04a9
>>   E: ID_MODEL=CanoScan
>>   E: ID_MODEL_ENC=CanoScan
>>   E: ID_MODEL_ID=1907
>>   E: ID_REVISION=0603
>>   E: ID_SERIAL=Canon_CanoScan
>>   E: ID_BUS=usb
>>   E: ID_USB_INTERFACES=:ffffff:
>>   E: MAJOR=189
>>   E: MINOR=10
>>   E: DEVTYPE=usb_device
>>   E: DRIVER=usb
>>   E: DEVICE=/proc/bus/usb/001/011
>>   E: PRODUCT=4a9/1907/603
>>   E: TYPE=255/255/255
>>   E: BUSNUM=001
>>   E: DEVNUM=011
>>   E: DEVLINKS=/dev/char/189:10
>>  --------------------------------------------------------------------------
>> --------------------------------------------
>>
>> I attached a new log with usb-traces.
>> Was anyone able to scan sucessful any image with this scanner?
> 	Hello,
>
> 	thanks for these tests. Now I think that the 700F isn't just a clone of 
> LiDE 100/200 and specific structures must be tuned. The first thing to do is 
> to define specific GPIO description for this model and see how it fares.
>
> Regards,
> 	Stef
>
Ok, how can I help You to make it work?

-- 
Regaards

Sebastian Reinhardt