[sane-devel] trying Canon DR-5060-F

Christophe Largeau (liste) liste at alixen.fr
Mon Jan 3 16:19:55 UTC 2011 

Hi,

change, recompile and test done.

The test1pnm file is empty.

The compressed test1.log  is attached to this message.

Christophe.

Le 03/01/2011 16:50, m. allan noah a écrit :
> ok- can you make some changes, recompile, and test?
>
> canon_dr.c in function set_window, around line 3615 comment out these lines:
>
> set_WD_brightness (desc1, s->brightness+128);
> set_WD_threshold (desc1, s->threshold);
> set_WD_contrast (desc1, s->contrast+128);
>
> Then compile, copy the library, and scan again, using this command:
>
> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>> test1pnm 2>test1.log
>
> Hopefully test1.pnm will contain an image. If not, compress the log
> and send it to me.
>
> allan
>
> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com>  wrote:
>> Yes- I can see some set window data in it, though I am not sure it is
>> complete. This sniffer program seems to miss some of the data. I will
>> look some more today.
>>
>> allan
>>
>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>> <liste at alixen.fr>  wrote:
>>> Hi,
>>>
>>> have you checked the log ? Is it helpful ?
>>>
>>> Christophe.
>>>
>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>
>>>> Thank you.
>>>>
>>>> Note that I'll be away until next monday.
>>>>
>>>> Christophe.
>>>>
>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>
>>>>> Thanks. I'll look at it tonight.
>>>>>
>>>>> allan
>>>>>
>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
>>>>> <liste at alixen.fr>  wrote:
>>>>>>
>>>>>> the trace.wsl file taken from the snifer is attached to this message.
>>>>>>
>>>>>> Christophe.
>>>>>>
>>>>>>
>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>
>>>>>>> the sniffer utility:
>>>>>>>
>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>
>>>>>>>
>>>>>>> We need to use that to capture traffic of a low-resolution black and
>>>>>>> white
>>>>>>> scan.
>>>>>>>
>>>>>>> I cannot give more specific instructions, because I rarely use this
>>>>>>> program.
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>
>>>>>>>> I will replug the scsi card into the orignal windows machine. Do
>>>>>>>> you have
>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>
>>>>>>>> Christophe.
>>>>>>>>
>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>
>>>>>>>>> hmm- it is mad about something we ask it to do in the set window
>>>>>>>>> command. I don't have a protocol manual for this machine, so we have
>>>>>>>>> to guess what the problem is. Or, we have to try and capture a log
>>>>>>>>> from Windows driver. Can you use this machine on windows?
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>
>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>
>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan noah<kitno455 at gmail.com>
>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>
>>>>>>>>>>>> allan
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>>>>>
>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>> API
>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>> API
>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>
>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner.
>>>>>>>>>>>>> If the
>>>>>>>>>>>>> # result is different from what you expected, first make sure
>>>>>>>>>>>>> your
>>>>>>>>>>>>> # scanner is powered up and properly connected to your computer.
>>>>>>>>>>>>>
>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be
>>>>>>>>>>>>> supported by
>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>> Try
>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>
>>>>>>>>>>>>> # No USB scanners found. If you expected something different,
>>>>>>>>>>>>> make
>>>>>>>>>>>>> sure
>>>>>>>>>>>>> that
>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller
>>>>>>>>>>>>> and
>>>>>>>>>>>>> have
>>>>>>>>>>>>> setup
>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>>>>>
>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>
>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other
>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>> ports
>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>
>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>
>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>> ,
>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>>>>>
>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>> }
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la and
>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>
>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>>>>>
>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from sane-backends
>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached, attaching
>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>> ......
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20 20
>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20 20
>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20 20
>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version
>>>>>>>>>>>>> 0110
>>>>>>>>>>>>> at
>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>> ......
>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00 c8
>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>>>>>> .d............
>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>> ......
>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>
>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Christophe Largeau
>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>> --
>>>>>> Christophe Largeau
>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> --
>>> Christophe Largeau
>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>
>>
>>
>>
>> --
>> "The truth is an offense, but not a sin"
>>
>
>
>


-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test1.log.gz
Type: application/x-gzip
Size: 2598 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110103/3f0d73d9/attachment-0001.bin>

More information about the sane-devel mailing list