[sane-devel] trying Canon DR-5060-F

Christophe Largeau (liste) liste at alixen.fr
Mon Jan 3 16:40:36 UTC 2011 

Here is the new test2.log ;)

Christophe.

Le 03/01/2011 17:31, m. allan noah a écrit :
> Excellent. set_window is now accepted by the scanner, but it does not
> like our ssm_do() call. So, edit canon_dr.c around line 3273, and
> comment out the call to ssm_do(). Then try again with test2 :)
>
> allan
>
> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
> <liste at alixen.fr>  wrote:
>> Hi,
>>
>> change, recompile and test done.
>>
>> The test1pnm file is empty.
>>
>> The compressed test1.log  is attached to this message.
>>
>> Christophe.
>>
>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>
>>> ok- can you make some changes, recompile, and test?
>>>
>>> canon_dr.c in function set_window, around line 3615 comment out these
>>> lines:
>>>
>>> set_WD_brightness (desc1, s->brightness+128);
>>> set_WD_threshold (desc1, s->threshold);
>>> set_WD_contrast (desc1, s->contrast+128);
>>>
>>> Then compile, copy the library, and scan again, using this command:
>>>
>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>>
>>>> test1pnm 2>test1.log
>>>
>>> Hopefully test1.pnm will contain an image. If not, compress the log
>>> and send it to me.
>>>
>>> allan
>>>
>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com>    wrote:
>>>>
>>>> Yes- I can see some set window data in it, though I am not sure it is
>>>> complete. This sniffer program seems to miss some of the data. I will
>>>> look some more today.
>>>>
>>>> allan
>>>>
>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr>    wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> have you checked the log ? Is it helpful ?
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>
>>>>>> Thank you.
>>>>>>
>>>>>> Note that I'll be away until next monday.
>>>>>>
>>>>>> Christophe.
>>>>>>
>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>
>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>
>>>>>>> allan
>>>>>>>
>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>
>>>>>>>> the trace.wsl file taken from the snifer is attached to this message.
>>>>>>>>
>>>>>>>> Christophe.
>>>>>>>>
>>>>>>>>
>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>
>>>>>>>>> the sniffer utility:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> We need to use that to capture traffic of a low-resolution black and
>>>>>>>>> white
>>>>>>>>> scan.
>>>>>>>>>
>>>>>>>>> I cannot give more specific instructions, because I rarely use this
>>>>>>>>> program.
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>
>>>>>>>>>> I will replug the scsi card into the orignal windows machine. Do
>>>>>>>>>> you have
>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> hmm- it is mad about something we ask it to do in the set window
>>>>>>>>>>> command. I don't have a protocol manual for this machine, so we
>>>>>>>>>>> have
>>>>>>>>>>> to guess what the problem is. Or, we have to try and capture a log
>>>>>>>>>>> from Windows driver. Can you use this machine on windows?
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>
>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>
>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>
>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>> <liste at alixen.fr>    wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your scanner.
>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>> # result is different from what you expected, first make sure
>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>> # scanner is powered up and properly connected to your
>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be
>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> # No USB scanners found. If you expected something different,
>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host controller
>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other
>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Then I replace the compiled versions of libsane-canon_dr.la
>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from
>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached,
>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file canon_dr.conf
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20 20
>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20 20
>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20 20
>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F version
>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c 00
>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>> Alixen
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Christophe Largeau
>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> "The truth is an offense, but not a sin"
>>>>
>>>
>>>
>>>
>>
>>
>> --
>> Christophe Largeau
>> Alixen 20 rue Jean Rostand 91 400 Orsay
>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>
>
>
>


-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
-------------- next part --------------
A non-text attachment was scrubbed...
Name: test2.log.gz
Type: application/x-gzip
Size: 2596 bytes
Desc: not available
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110103/f499af57/attachment-0001.bin>

More information about the sane-devel mailing list