[sane-devel] trying Canon DR-5060-F

Christophe Largeau (liste) liste at alixen.fr
Tue Jan 4 09:33:42 UTC 2011 

Thank you for the information, waiting for your fix.

Christophe.

Le 03/01/2011 20:03, m. allan noah a écrit :
> It appears that the corrupt image is because the scanner sends us 1728
> pixels per line, but we asked for only 1700. Likely this means that
> the scanner is limited to image widths which are a multiple of 32
> pixels. I will see if I can come up with a fix.
>
> allan
>
> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com>  wrote:
>> jpg destroys too much image information. Any chance to can compress
>> the pnm instead, and send that to me directly?
>>
>> allan
>>
>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>> <liste at alixen.fr>  wrote:
>>> OK,
>>>
>>> my A4 page (basically 0.5 millimeter squares) has been processed
>>>
>>> you can view the result here
>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not really the
>>> expected result ;)
>>>
>>> You'll find the compressed test3.log attached to this message.
>>>
>>> Do you need other informations for ssm_df() and ssm_do() debugging ?
>>>
>>> Christophe.
>>>
>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>
>>>> Ah- same thing, this time also comment out ssm_df(). It would be nice
>>>> to get those two commands working for your machine (if they are
>>>> supported by the hardware), but they are not required for proper
>>>> functioning.
>>>>
>>>> allan
>>>>
>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr>    wrote:
>>>>>
>>>>> Here is the new test2.log ;)
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>
>>>>>> Excellent. set_window is now accepted by the scanner, but it does not
>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273, and
>>>>>> comment out the call to ssm_do(). Then try again with test2 :)
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>> <liste at alixen.fr>      wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> change, recompile and test done.
>>>>>>>
>>>>>>> The test1pnm file is empty.
>>>>>>>
>>>>>>> The compressed test1.log  is attached to this message.
>>>>>>>
>>>>>>> Christophe.
>>>>>>>
>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>
>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>
>>>>>>>> canon_dr.c in function set_window, around line 3615 comment out these
>>>>>>>> lines:
>>>>>>>>
>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>
>>>>>>>> Then compile, copy the library, and scan again, using this command:
>>>>>>>>
>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>>>>>>>
>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>
>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress the log
>>>>>>>> and send it to me.
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan noah<kitno455 at gmail.com>
>>>>>>>>   wrote:
>>>>>>>>>
>>>>>>>>> Yes- I can see some set window data in it, though I am not sure it is
>>>>>>>>> complete. This sniffer program seems to miss some of the data. I will
>>>>>>>>> look some more today.
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>>>>>>
>>>>>>>>>>> Thank you.
>>>>>>>>>>>
>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>
>>>>>>>>>>> Christophe.
>>>>>>>>>>>
>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>
>>>>>>>>>>>> allan
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau (liste)
>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached to this
>>>>>>>>>>>>> message.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> We need to use that to capture traffic of a low-resolution black
>>>>>>>>>>>>>> and
>>>>>>>>>>>>>> white
>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I cannot give more specific instructions, because I rarely use
>>>>>>>>>>>>>> this
>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows machine.
>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in the set
>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this machine, so
>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and capture a
>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on windows?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>        wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu 10.10
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect your
>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>> # result is different from what you expected, first make
>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to your
>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at /dev/sg2
>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may not be
>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something
>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB host
>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for details.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or other
>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the scanner wasn't
>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at line 1203.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F scanner
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr to 30.
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35, from
>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently attached,
>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file
>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi CANON DR'
>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer size
>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41 4e 4f 4e 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20 20 20 20 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36 30 37 20 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner DR-5060F
>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5 01 2c 01 2c
>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00 13 ee 0e 00
>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner /dev/sg2
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for '' (0)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-x' (8)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'br-y' (9)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-x' (6)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-x' (8)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for 'tl-y' (7)
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for 'br-y' (9)
>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Christophe Largeau
>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Christophe Largeau
>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>
>>
>>
>>
>> --
>> "The truth is an offense, but not a sin"
>>
>
>
>


-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54

More information about the sane-devel mailing list