[sane-devel] trying Canon DR-5060-F

m. allan noah kitno455 at gmail.com
Wed Jan 5 17:28:35 UTC 2011 

Looks like 100 and 150 were rounded up to 200. 250 was rounded down to
240. This scanner only supports a few resolutions in the Y direction,
but many more in the X direction. Unfortunately, the code does not
support this.

allan

On Wed, Jan 5, 2011 at 11:53 AM, Christophe Largeau (liste)
<liste at alixen.fr> wrote:
> I've done the following tests :
>
> test8 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 100 --mode
> Gray > test8.pnm 2>test8.log
>        comment : 1 A4 paper portrait
>        result : OK
>
> test9 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 150 --mode
> Gray > test9.pnm 2>test9.log
>        comment : 1 A4 paper portrait
>        result : OK
>
> test10 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode
> Gray > test10.pnm 2>test10.log
>        comment : 1 A4 paper portrait
>        result : OK
>
> test11 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 250 --mode
> Gray > test11.pnm 2>test11.log
>        comment : 1 A4 paper portrait
>        result : OK
>
> test12 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 300 --mode
> Gray > test12.pnm 2>test12.log
>        comment : 1 A4 paper portrait
>        result : OK
>
> test13 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 600 --mode
> Gray > test13.pnm 2>test13.log
>        comment : 1 A4 paper portrait
>        result : OK (falling back to 300)
>
> test14 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage -b --resolution 300 --mode
> Gray --batch=test14_%d.pnm 2>test14.log
>        comment : 2 A4 paper portrait
>        result : OK
>
> test15 :
>        command : SANE_DEBUG_CANON_DR=30 scanimage --resolution 300 --mode
> Gray -l 0 -t 0 -x 295.279 -y 431.914 --page-width 295.279mm --page-height
> 431.914mm > test15.pnm 2>test15.log
>        comment : 1 A3 paper portrait
>        result : OK
>
> the tests8to15.tar.gz file with all the test (log and pnm) is here :
> http://dl.free.fr/b6JQuOUjm
>
> Christophe.
>
> Le 05/01/2011 15:58, Christophe Largeau (liste) a écrit :
>>
>> Oops... Sorry.
>>
>> I'll make new tests for the multiple sheets and sizes too.
>>
>> Christophe.
>>
>> Le 05/01/2011 15:46, m. allan noah a écrit :
>>>
>>> If you wish to get multiple images, or use duplex, you must add the -b
>>> flag to scanimage. it will make multiple image files in the current
>>> directory. see the manpage for naming of files.
>>>
>>> if you wish to change the size of the scan, you must set the paper
>>> size, and then set the width and height of the image. see scanimage
>>> --help for list of options.
>>>
>>> allan
>>>
>>> On Wed, Jan 5, 2011 at 9:43 AM, Christophe Largeau (liste)
>>> <liste at alixen.fr> wrote:
>>>>
>>>> Ok for other tests based on the resolution.
>>>>
>>>> I've done more tests just "to see" :
>>>> - loading 2 A4 sheets on the scanner feeder => only one processed
>>>> - I've placed one A4 sheet in the feeder but in a landscape position
>>>> : nice
>>>> try (no left or right side ;) )
>>>>
>>>> I also thought about the log of windows driver.
>>>>
>>>> Christophe.
>>>>
>>>> Le 05/01/2011 13:56, m. allan noah a écrit :
>>>>>
>>>>> Ok. Perhaps you can do some more tests in grayscale with sane, where
>>>>> you change something like resolution or the scan width each time. I
>>>>> want to make sure that gray works properly. If you find any problems,
>>>>> please send the logs and the command line you used.
>>>>>
>>>>> After that, I am afraid we will need to get another log of the windows
>>>>> driver, this time making a black&white scan.
>>>>>
>>>>> allan
>>>>>
>>>>> On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste)
>>>>> <liste at alixen.fr> wrote:
>>>>>>
>>>>>> just done test7 (Lineart mode). The result is a black image (
>>>>>> http://dl.free.fr/bDipeF5mF
>>>>>> )
>>>>>>
>>>>>> Christophe.
>>>>>>
>>>>>> Le 05/01/2011 09:23, Christophe Largeau (liste) a écrit :
>>>>>>>
>>>>>>> Great, it's working fine (see the test6.tar.gz at
>>>>>>> http://dl.free.fr/bGEgn9yFu )
>>>>>>>
>>>>>>> I'll make series of tests at other resolutions.
>>>>>>>
>>>>>>> Thanx.
>>>>>>>
>>>>>>> Le 04/01/2011 17:53, m. allan noah a écrit :
>>>>>>>>
>>>>>>>> ok- let us try again, slightly updated file.
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste)
>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> thank you for the new version.
>>>>>>>>>
>>>>>>>>> The scan is not exactly what it should be (see the file
>>>>>>>>> test5.tar.gz). The
>>>>>>>>> scanned image is not at the right position. Probably a shift
>>>>>>>>> problem.
>>>>>>>>>
>>>>>>>>> Note that for all the tests I've done it was a A4 paper and the
>>>>>>>>> Canon
>>>>>>>>> DR-5060-F is a A3 scanner.
>>>>>>>>>
>>>>>>>>> the file test5.tar.gz can be downloaded here :
>>>>>>>>> http://dl.free.fr/baKWwnrcy
>>>>>>>>>
>>>>>>>>> Christophe.
>>>>>>>>>
>>>>>>>>> Le 04/01/2011 16:23, m. allan noah a écrit :
>>>>>>>>>>
>>>>>>>>>> here is a new version of two files. use these to replace your
>>>>>>>>>> existing
>>>>>>>>>> copies, and recompile. This should contain all of your current
>>>>>>>>>> fixes,
>>>>>>>>>> and it should (hopefully) produce proper grayscale scans.
>>>>>>>>>>
>>>>>>>>>> If you can test this also in lineart mode, it might need the same
>>>>>>>>>> width fix as grayscale...
>>>>>>>>>>
>>>>>>>>>> allan
>>>>>>>>>>
>>>>>>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste)
>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>
>>>>>>>>>>> Thank you for the information, waiting for your fix.
>>>>>>>>>>>
>>>>>>>>>>> Christophe.
>>>>>>>>>>>
>>>>>>>>>>> Le 03/01/2011 20:03, m. allan noah a écrit :
>>>>>>>>>>>>
>>>>>>>>>>>> It appears that the corrupt image is because the scanner
>>>>>>>>>>>> sends us
>>>>>>>>>>>> 1728
>>>>>>>>>>>> pixels per line, but we asked for only 1700. Likely this
>>>>>>>>>>>> means that
>>>>>>>>>>>> the scanner is limited to image widths which are a multiple
>>>>>>>>>>>> of 32
>>>>>>>>>>>> pixels. I will see if I can come up with a fix.
>>>>>>>>>>>>
>>>>>>>>>>>> allan
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan
>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> jpg destroys too much image information. Any chance to can
>>>>>>>>>>>>> compress
>>>>>>>>>>>>> the pnm instead, and send that to me directly?
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> OK,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been
>>>>>>>>>>>>>> processed
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> you can view the result here
>>>>>>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not
>>>>>>>>>>>>>> really the
>>>>>>>>>>>>>> expected result ;)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> You'll find the compressed test3.log attached to this message.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Do you need other informations for ssm_df() and ssm_do()
>>>>>>>>>>>>>> debugging ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would
>>>>>>>>>>>>>>> be nice
>>>>>>>>>>>>>>> to get those two commands working for your machine (if
>>>>>>>>>>>>>>> they are
>>>>>>>>>>>>>>> supported by the hardware), but they are not required for
>>>>>>>>>>>>>>> proper
>>>>>>>>>>>>>>> functioning.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Here is the new test2.log ;)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner,
>>>>>>>>>>>>>>>>> but it
>>>>>>>>>>>>>>>>> does
>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line
>>>>>>>>>>>>>>>>> 3273,
>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with
>>>>>>>>>>>>>>>>> test2 :)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> change, recompile and test done.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> The test1pnm file is empty.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> The compressed test1.log is attached to this message.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615
>>>>>>>>>>>>>>>>>>> comment
>>>>>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>>>>>> these
>>>>>>>>>>>>>>>>>>> lines:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using
>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>> command:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode
>>>>>>>>>>>>>>>>>>> Gray
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not,
>>>>>>>>>>>>>>>>>>> compress
>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>> and send it to me.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan
>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I
>>>>>>>>>>>>>>>>>>>> am not
>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the
>>>>>>>>>>>>>>>>>>>> data. I
>>>>>>>>>>>>>>>>>>>> will
>>>>>>>>>>>>>>>>>>>> look some more today.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a
>>>>>>>>>>>>>>>>>>>>> écrit :
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached
>>>>>>>>>>>>>>>>>>>>>>>> to this
>>>>>>>>>>>>>>>>>>>>>>>> message.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a
>>>>>>>>>>>>>>>>>>>>>>>>> low-resolution
>>>>>>>>>>>>>>>>>>>>>>>>> black
>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>> white
>>>>>>>>>>>>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I
>>>>>>>>>>>>>>>>>>>>>>>>> rarely
>>>>>>>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal
>>>>>>>>>>>>>>>>>>>>>>>>>> windows
>>>>>>>>>>>>>>>>>>>>>>>>>> machine.
>>>>>>>>>>>>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in
>>>>>>>>>>>>>>>>>>>>>>>>>>> the set
>>>>>>>>>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this
>>>>>>>>>>>>>>>>>>>>>>>>>>> machine,
>>>>>>>>>>>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to
>>>>>>>>>>>>>>>>>>>>>>>>>>> try and
>>>>>>>>>>>>>>>>>>>>>>>>>>> capture a
>>>>>>>>>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on
>>>>>>>>>>>>>>>>>>>>>>>>>>> windows?
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe
>>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Ubuntu
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> detect
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> first
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> connected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or may
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> manpage.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> something
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> USB
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> host
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-usb for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> port
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> or
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> other
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.c at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> line
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1203.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to 30.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.35,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attached,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> config file
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'scsi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> buffer
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> size
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 0e
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner(s)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> requested
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "unsubscribe
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Christophe Largeau
>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Christophe Largeau
>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Christophe Largeau
>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>
>>>
>>>
>>>
>>
>>
>
> --
> Christophe Largeau
> Alixen 20 rue Jean Rostand 91 400 Orsay
> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>



-- 
"The truth is an offense, but not a sin"

More information about the sane-devel mailing list