[sane-devel] trying Canon DR-5060-F

Wed Jan 5 14:43:46 UTC 2011

Ok for other tests based on the resolution.

I've done more tests just "to see" :
- loading 2 A4 sheets on the scanner feeder => only one processed
- I've placed one A4 sheet in the feeder but in a landscape position : 
nice try (no left or right side ;) )

I also thought about the log of windows driver.

Christophe.

Le 05/01/2011 13:56, m. allan noah a écrit :
> Ok. Perhaps you can do some more tests in grayscale with sane, where
> you change something like resolution or the scan width each time. I
> want to make sure that gray works properly. If you find any problems,
> please send the logs and the command line you used.
>
> After that, I am afraid we will need to get another log of the windows
> driver, this time making a black&white scan.
>
> allan
>
> On Wed, Jan 5, 2011 at 5:50 AM, Christophe Largeau (liste)
> <liste at alixen.fr>  wrote:
>> just done test7 (Lineart mode). The result is a black image (
>> http://dl.free.fr/bDipeF5mF
>>   )
>>
>> Christophe.
>>
>> Le 05/01/2011 09:23, Christophe Largeau (liste) a écrit :
>>>
>>> Great, it's working fine (see the test6.tar.gz at
>>> http://dl.free.fr/bGEgn9yFu )
>>>
>>> I'll make series of tests at other resolutions.
>>>
>>> Thanx.
>>>
>>> Le 04/01/2011 17:53, m. allan noah a écrit :
>>>>
>>>> ok- let us try again, slightly updated file.
>>>>
>>>> allan
>>>>
>>>> On Tue, Jan 4, 2011 at 11:26 AM, Christophe Largeau (liste)
>>>> <liste at alixen.fr>  wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>> thank you for the new version.
>>>>>
>>>>> The scan is not exactly what it should be (see the file
>>>>> test5.tar.gz). The
>>>>> scanned image is not at the right position. Probably a shift problem.
>>>>>
>>>>> Note that for all the tests I've done it was a A4 paper and the Canon
>>>>> DR-5060-F is a A3 scanner.
>>>>>
>>>>> the file test5.tar.gz can be downloaded here :
>>>>> http://dl.free.fr/baKWwnrcy
>>>>>
>>>>> Christophe.
>>>>>
>>>>> Le 04/01/2011 16:23, m. allan noah a écrit :
>>>>>>
>>>>>> here is a new version of two files. use these to replace your existing
>>>>>> copies, and recompile. This should contain all of your current fixes,
>>>>>> and it should (hopefully) produce proper grayscale scans.
>>>>>>
>>>>>> If you can test this also in lineart mode, it might need the same
>>>>>> width fix as grayscale...
>>>>>>
>>>>>> allan
>>>>>>
>>>>>> On Tue, Jan 4, 2011 at 4:33 AM, Christophe Largeau (liste)
>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>
>>>>>>> Thank you for the information, waiting for your fix.
>>>>>>>
>>>>>>> Christophe.
>>>>>>>
>>>>>>> Le 03/01/2011 20:03, m. allan noah a écrit :
>>>>>>>>
>>>>>>>> It appears that the corrupt image is because the scanner sends us
>>>>>>>> 1728
>>>>>>>> pixels per line, but we asked for only 1700. Likely this means that
>>>>>>>> the scanner is limited to image widths which are a multiple of 32
>>>>>>>> pixels. I will see if I can come up with a fix.
>>>>>>>>
>>>>>>>> allan
>>>>>>>>
>>>>>>>> On Mon, Jan 3, 2011 at 12:54 PM, m. allan noah<kitno455 at gmail.com>
>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> jpg destroys too much image information. Any chance to can compress
>>>>>>>>> the pnm instead, and send that to me directly?
>>>>>>>>>
>>>>>>>>> allan
>>>>>>>>>
>>>>>>>>> On Mon, Jan 3, 2011 at 12:11 PM, Christophe Largeau (liste)
>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>
>>>>>>>>>> OK,
>>>>>>>>>>
>>>>>>>>>> my A4 page (basically 0.5 millimeter squares) has been processed
>>>>>>>>>>
>>>>>>>>>> you can view the result here
>>>>>>>>>> http://i37.servimg.com/u/f37/15/57/48/39/test3p10.jpg : not
>>>>>>>>>> really the
>>>>>>>>>> expected result ;)
>>>>>>>>>>
>>>>>>>>>> You'll find the compressed test3.log attached to this message.
>>>>>>>>>>
>>>>>>>>>> Do you need other informations for ssm_df() and ssm_do()
>>>>>>>>>> debugging ?
>>>>>>>>>>
>>>>>>>>>> Christophe.
>>>>>>>>>>
>>>>>>>>>> Le 03/01/2011 17:45, m. allan noah a écrit :
>>>>>>>>>>>
>>>>>>>>>>> Ah- same thing, this time also comment out ssm_df(). It would
>>>>>>>>>>> be nice
>>>>>>>>>>> to get those two commands working for your machine (if they are
>>>>>>>>>>> supported by the hardware), but they are not required for proper
>>>>>>>>>>> functioning.
>>>>>>>>>>>
>>>>>>>>>>> allan
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:40 AM, Christophe Largeau (liste)
>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Here is the new test2.log ;)
>>>>>>>>>>>>
>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>
>>>>>>>>>>>> Le 03/01/2011 17:31, m. allan noah a écrit :
>>>>>>>>>>>>>
>>>>>>>>>>>>> Excellent. set_window is now accepted by the scanner, but it
>>>>>>>>>>>>> does
>>>>>>>>>>>>> not
>>>>>>>>>>>>> like our ssm_do() call. So, edit canon_dr.c around line 3273,
>>>>>>>>>>>>> and
>>>>>>>>>>>>> comment out the call to ssm_do(). Then try again with test2 :)
>>>>>>>>>>>>>
>>>>>>>>>>>>> allan
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 11:19 AM, Christophe Largeau (liste)
>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> change, recompile and test done.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The test1pnm file is empty.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The compressed test1.log is attached to this message.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Le 03/01/2011 16:50, m. allan noah a écrit :
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ok- can you make some changes, recompile, and test?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> canon_dr.c in function set_window, around line 3615 comment
>>>>>>>>>>>>>>> out
>>>>>>>>>>>>>>> these
>>>>>>>>>>>>>>> lines:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> set_WD_brightness (desc1, s->brightness+128);
>>>>>>>>>>>>>>> set_WD_threshold (desc1, s->threshold);
>>>>>>>>>>>>>>> set_WD_contrast (desc1, s->contrast+128);
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Then compile, copy the library, and scan again, using this
>>>>>>>>>>>>>>> command:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage --resolution 200 --mode Gray
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> test1pnm 2>test1.log
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hopefully test1.pnm will contain an image. If not, compress
>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>> and send it to me.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 10:11 AM, m. allan
>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Yes- I can see some set window data in it, though I am not
>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>> complete. This sniffer program seems to miss some of the
>>>>>>>>>>>>>>>> data. I
>>>>>>>>>>>>>>>> will
>>>>>>>>>>>>>>>> look some more today.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Mon, Jan 3, 2011 at 8:06 AM, Christophe Largeau (liste)
>>>>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> have you checked the log ? Is it helpful ?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Le 29/12/2010 17:04, Christophe Largeau (liste) a écrit :
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thank you.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Note that I'll be away until next monday.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Le 29/12/2010 17:00, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Thanks. I'll look at it tonight.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 10:07 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> the trace.wsl file taken from the snifer is attached
>>>>>>>>>>>>>>>>>>>> to this
>>>>>>>>>>>>>>>>>>>> message.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:38, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> the sniffer utility:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ftp://ftp.compuware.com/pub/driverstudio/outgoing/utility/wdmsniffer.zip
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> We need to use that to capture traffic of a
>>>>>>>>>>>>>>>>>>>>> low-resolution
>>>>>>>>>>>>>>>>>>>>> black
>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>> white
>>>>>>>>>>>>>>>>>>>>> scan.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> I cannot give more specific instructions, because I
>>>>>>>>>>>>>>>>>>>>> rarely
>>>>>>>>>>>>>>>>>>>>> use
>>>>>>>>>>>>>>>>>>>>> this
>>>>>>>>>>>>>>>>>>>>> program.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 9:29 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I will replug the scsi card into the orignal windows
>>>>>>>>>>>>>>>>>>>>>> machine.
>>>>>>>>>>>>>>>>>>>>>> Do
>>>>>>>>>>>>>>>>>>>>>> you have
>>>>>>>>>>>>>>>>>>>>>> instruction for the log capture on windows ?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 15:22, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> hmm- it is mad about something we ask it to do in
>>>>>>>>>>>>>>>>>>>>>>> the set
>>>>>>>>>>>>>>>>>>>>>>> window
>>>>>>>>>>>>>>>>>>>>>>> command. I don't have a protocol manual for this
>>>>>>>>>>>>>>>>>>>>>>> machine,
>>>>>>>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>>>>>>> we
>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>> to guess what the problem is. Or, we have to try and
>>>>>>>>>>>>>>>>>>>>>>> capture a
>>>>>>>>>>>>>>>>>>>>>>> log
>>>>>>>>>>>>>>>>>>>>>>> from Windows driver. Can you use this machine on
>>>>>>>>>>>>>>>>>>>>>>> windows?
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:55 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> the new dr.log is attached to this message.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Le 29/12/2010 14:46, m. allan noah a écrit :
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Sorry, hit 'send' too soon- you should try:
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>> 2>dr.log>dr.pnm
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:35 AM, m. allan
>>>>>>>>>>>>>>>>>>>>>>>>> noah<kitno455 at gmail.com>
>>>>>>>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> "scanimage: output is not a file, exiting"
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> allan
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Wed, Dec 29, 2010 at 8:23 AM, Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>> (liste)
>>>>>>>>>>>>>>>>>>>>>>>>>> <liste at alixen.fr>  wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> I'm testing Canon DR-5060-F (SCSI) under Ubuntu
>>>>>>>>>>>>>>>>>>>>>>>>>>> 10.10
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ii libsane 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners
>>>>>>>>>>>>>>>>>>>>>>>>>>> ii sane-utils 1.0.21-2ubuntu2
>>>>>>>>>>>>>>>>>>>>>>>>>>> API
>>>>>>>>>>>>>>>>>>>>>>>>>>> library for scanners -- utilities
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> The sane-find-scanner commands returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>> # sane-find-scanner will now attempt to detect
>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner.
>>>>>>>>>>>>>>>>>>>>>>>>>>> If the
>>>>>>>>>>>>>>>>>>>>>>>>>>> # result is different from what you expected,
>>>>>>>>>>>>>>>>>>>>>>>>>>> first
>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanner is powered up and properly connected to
>>>>>>>>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>>>>>>>>> computer.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> found SCSI scanner "CANON DR-5060F 0110" at
>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Your SCSI scanner was detected. It may or may
>>>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>>>> supported by
>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE.
>>>>>>>>>>>>>>>>>>>>>>>>>>> Try
>>>>>>>>>>>>>>>>>>>>>>>>>>> # scanimage -L and read the backend's manpage.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # No USB scanners found. If you expected something
>>>>>>>>>>>>>>>>>>>>>>>>>>> different,
>>>>>>>>>>>>>>>>>>>>>>>>>>> make
>>>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>>>> that
>>>>>>>>>>>>>>>>>>>>>>>>>>> # you have loaded a kernel driver for your USB
>>>>>>>>>>>>>>>>>>>>>>>>>>> host
>>>>>>>>>>>>>>>>>>>>>>>>>>> controller
>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>>>>>> setup
>>>>>>>>>>>>>>>>>>>>>>>>>>> # the USB system correctly. See man sane-usb for
>>>>>>>>>>>>>>>>>>>>>>>>>>> details.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Not checking for parallel port scanners.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> # Most Scanners connected to the parallel port or
>>>>>>>>>>>>>>>>>>>>>>>>>>> other
>>>>>>>>>>>>>>>>>>>>>>>>>>> proprietary
>>>>>>>>>>>>>>>>>>>>>>>>>>> ports
>>>>>>>>>>>>>>>>>>>>>>>>>>> # can't be detected by this program.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> when I tried the command "scanimage -L" the
>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>> wasn't
>>>>>>>>>>>>>>>>>>>>>>>>>>> recognized
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> thanks to this message :
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/pipermail/sane-devel/2010-March/026220.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ,
>>>>>>>>>>>>>>>>>>>>>>>>>>> I've added the following lines to canon_dr.c at
>>>>>>>>>>>>>>>>>>>>>>>>>>> line
>>>>>>>>>>>>>>>>>>>>>>>>>>> 1203.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> else if (strstr (s->model_name,"DR-5060F")){
>>>>>>>>>>>>>>>>>>>>>>>>>>> s->can_write_panel = 0;
>>>>>>>>>>>>>>>>>>>>>>>>>>> }
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Then I replace the compiled versions of
>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.la
>>>>>>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>>>>>>> libsane-canon_dr.so.1.0.21 in /usr/lib/sane
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Now, the "scanimage -L" command returns :
>>>>>>>>>>>>>>>>>>>>>>>>>>> device `canon_dr:/dev/sg2' is a CANON DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>> scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Great, but the scanner doesn't work :
>>>>>>>>>>>>>>>>>>>>>>>>>>> SANE_DEBUG_CANON_DR=30 scanimage -d
>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr:/dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> [sanei_debug] Setting debug level of canon_dr
>>>>>>>>>>>>>>>>>>>>>>>>>>> to 30.
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: canon_dr backend 1.0.35,
>>>>>>>>>>>>>>>>>>>>>>>>>>> from
>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-backends
>>>>>>>>>>>>>>>>>>>>>>>>>>> 1.0.21
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_init: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: no scanners currently
>>>>>>>>>>>>>>>>>>>>>>>>>>> attached,
>>>>>>>>>>>>>>>>>>>>>>>>>>> attaching
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: reading config file
>>>>>>>>>>>>>>>>>>>>>>>>>>> canon_dr.conf
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: looking for 'scsi
>>>>>>>>>>>>>>>>>>>>>>>>>>> CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>> DR'
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: looking for '/dev/sg2'
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: cannot get requested buffer
>>>>>>>>>>>>>>>>>>>>>>>>>>> size
>>>>>>>>>>>>>>>>>>>>>>>>>>> (2097152/524288)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 00 00 00 30 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> ....0.
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 00 02 02 1f 00 00 10 43 41
>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e 4f
>>>>>>>>>>>>>>>>>>>>>>>>>>> 4e
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> ........CANON
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 44 52 2d 35 30 36 30 46 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 020: 30 31 31 30 32 30 30 31 30 36
>>>>>>>>>>>>>>>>>>>>>>>>>>> 30 37
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> 011020010607
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 48 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: Found CANON scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>> DR-5060F
>>>>>>>>>>>>>>>>>>>>>>>>>>> version
>>>>>>>>>>>>>>>>>>>>>>>>>>> 0110
>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_inquire: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 12 01 f0 00 1e 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: reading 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in:<<
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 06 f0 02 00 23 01 2c 01 2c a5
>>>>>>>>>>>>>>>>>>>>>>>>>>> 01 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>> 01
>>>>>>>>>>>>>>>>>>>>>>>>>>> 2c
>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> c8
>>>>>>>>>>>>>>>>>>>>>>>>>>> ....#.,.,..,.,..
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 010: 00 64 01 c0 00 00 0d a0 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> 13 ee
>>>>>>>>>>>>>>>>>>>>>>>>>>> 0e
>>>>>>>>>>>>>>>>>>>>>>>>>>> 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> .d............
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] in: read 30 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: length=23
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] standard options
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] basic y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step x res: 1 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] step y res: 0 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max x res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max y res: 300 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min x res: 200 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] min y res: 100 dpi
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 60 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 75 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 100 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 120 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 150 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 160 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 180 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 200 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 240 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 300 dpi: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 320 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 400 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 480 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 600 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 800 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 1200 dpi: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max width: 13952 (11.63 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] max length: 20408 (17.01 in)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] AWD: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] CE Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] C Emphasis: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] High quality: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] grayscale: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] halftone: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] monochrome: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] overflow: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_vpd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_model: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] read_panel: finish 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] send_panel: unsupported, finishing
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_panel: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_user: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] init_options: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] attach_one: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found scanner
>>>>>>>>>>>>>>>>>>>>>>>>>>> /dev/sg2
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: found 1 scanner(s)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_devices: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 requested
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: device /dev/sg2 found
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: opening SCSI device
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd: writing 6 bytes
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] cmd:>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] 000: 00 00 00 00 00 00
>>>>>>>>>>>>>>>>>>>>>>>>>>> ......
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] do_scsi_cmd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] wait_scanner: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] connect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_open: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 0
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> '' (0)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 1
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 2
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 3
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 4
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 5
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 6
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 7
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 10
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 11
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 12
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 13
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 14
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 15
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 16
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 17
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 18
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 19
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 20
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 21
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 22
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 23
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 24
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 25
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 26
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 27
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 28
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 29
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 30
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 31
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 32
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 33
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 34
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 35
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 36
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 37
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 38
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (6)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 8
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-x'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (8)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: get value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'tl-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (7)
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_get_option_descriptor: 9
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_control_option: set value for
>>>>>>>>>>>>>>>>>>>>>>>>>>> 'br-y'
>>>>>>>>>>>>>>>>>>>>>>>>>>> (9)
>>>>>>>>>>>>>>>>>>>>>>>>>>> scanimage: output is not a file, exiting
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnecting scsi device
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] image_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] offset_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] gain_buffers: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_close: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: start
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] disconnect_fd: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>> [canon_dr] sane_exit: finish
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Any idea ?
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe.
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel mailing list:
>>>>>>>>>>>>>>>>>>>>>>>>>>> sane-devel at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Unsubscribe: Send mail with subject "unsubscribe
>>>>>>>>>>>>>>>>>>>>>>>>>>> your_password"
>>>>>>>>>>>>>>>>>>>>>>>>>>> to sane-devel-request at lists.alioth.debian.org
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>>>> Alixen
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Christophe Largeau
>>>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Christophe Largeau
>>>>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> "The truth is an offense, but not a sin"
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Christophe Largeau
>>>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Christophe Largeau
>>>>> Alixen 20 rue Jean Rostand 91 400 Orsay
>>>>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>
>> --
>> Christophe Largeau
>> Alixen 20 rue Jean Rostand 91 400 Orsay
>> Tel : 01 60 19 72 31, Fax : 01 69 41 78 54
>>
>
>
>

-- 
Christophe Largeau
Alixen 20 rue Jean Rostand 91 400 Orsay
Tel : 01 60 19 72 31, Fax : 01 69 41 78 54