[sane-devel] Epson MFP Stylus DX3850 via Net won't work
cool.chris65 at web.de
cool.chris65 at web.de
Thu Jan 20 06:40:41 UTC 2011
Hello,
I've some trouble with my Epson-MFP Stylus DX3850. Local connected it works
fine in scanner-mode (also as printer ;) ), but connectet to my second
Fritzbox-Router (modded with Freetz), there is a Problem:
First Try after Box-Start and Epson-Start works fine.
Second Try (Box allways on, Scanner newly switched on) starts the xsane-
scanner-choice (I installed both epson-modules on the box), but crashes with
an error like "Error during I/O..."
Third Try brings only a box "no device found"
Here is the actual log of second and third try:
root at fritz:/var/mod/root# SANE_DEBUG_EPSON2=128 saned -d128
[saned] main: starting debug mode (level 128)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up
[saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
[saned] do_bindings: " sane-port " service unknown on your host; you should
add
[saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner
daemon
[saned] do_bindings: to your /etc/services file (or equivalent). Proceeding
anyway.
[saned] do_bindings: [0] socket () using IPv6
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] listen ()
[saned] do_bindings: [1] socket () using IPv4
[saned] do_bindings: [1] setsockopt ()
[saned] do_bindings: [1] bind () to port 6566
[saned] do_bindings: [1] bind failed: Address already in use
[saned] run_standalone: waiting for control connection
[saned] handle_connection: processing client connection
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.1.8
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: fritz.fonwlan.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or
directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `192.168.1.0/24'
[saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24
[saned] check_host: access granted from IP address 192.168.1.8 (in subnet
192.168.1.0/24)
[saned] init: access granted
[saned] init: access granted to saned-user@::ffff:192.168.1.8
[saned] process_request: waiting for request
[saned] process_request: got request 1
[sanei_debug] Setting debug level of epson2 to 128.
[epson2] sane_epson2_init: sane-backends 1.0.21
[epson2] epson2 backend, version 1.0.124
[epson2] sane_epson2_get_devices
[epson2] probe_devices
[epson2] free_devices
[epson2] attach_one_config: len = 10, line = scsi EPSON
[epson2] attach_one_config: len = 3, line = usb
[epson2] attach_one_usb: dev = libusb:001:010
[epson2] attach: devname = libusb:001:010, type = 3
[epson2] e2_dev_init
[epson2] open_scanner: libusb:001:010
[epson2] scanner opened
[epson2] found valid Epson scanner: 0x4b8/0x818 (vendorID/productID)
[epson2] e2_set_model: model is 'generic'
[epson2] esci_reset
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC @
[epson2] buf[0] 1b .
[epson2] buf[1] 40 @
[epson2] e2_send: cmd count, r = 0, w = 1
[epson2] e2_recv: size = 1, buf = 0x7fa473c0
[epson2] e2_recv: cmd count, r = 1, w = 1
[epson2] buf[0] 06 .
[epson2] e2_discover_capabilities
[epson2] esci_request_identity
[epson2] e2_cmd_info_block, params len = 2, reply len = 0, buf = 0x7fa47388
[epson2] e2_send: size = 2, reply = 0
[epson2] e2_send: ESC I
[epson2] buf[0] 1b .
[epson2] buf[1] 49 I
[epson2] e2_send: cmd count, r = 1, w = 2
[epson2] e2_recv: size = 4, buf = 0x7fa472c4
[epson2] e2_recv: cmd count, r = 2, w = 2
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 13 .
[epson2] buf[3] 00 .
[epson2] e2_recv_info_block: payload length: 19
[epson2] e2_recv: size = 19, buf = 0x421628
[epson2] e2_recv: cmd count, r = 3, w = 2
[epson2] buf[0] 44 D
[epson2] buf[1] 37 7
[epson2] buf[2] 52 R
[epson2] buf[3] 4b K
[epson2] buf[4] 00 .
[epson2] buf[5] 52 R
[epson2] buf[6] 96 .
[epson2] buf[7] 00 .
[epson2] buf[8] 52 R
[epson2] buf[9] 2c ,
[epson2] buf[10] 01 .
[epson2] buf[11] 52 R
[epson2] buf[12] 58 X
[epson2] buf[13] 02 .
[epson2] buf[14] 41 A
[epson2] buf[15] ec .
[epson2] buf[16] 13 .
[epson2] buf[17] 6c l
[epson2] buf[18] 1b .
[epson2] e2_set_cmd_level: D7
[epson2] e2_add_resolution: add (dpi): 75
[epson2] e2_add_resolution: add (dpi): 150
[epson2] e2_add_resolution: add (dpi): 300
[epson2] e2_add_resolution: add (dpi): 600
[epson2] maximum scan area: 5100x7020
[epson2] e2_set_fbf_area: 0.000000,0.000000 215.899994,297.179993 600 [mm]
[epson2] esci_request_status
[epson2] e2_send: size = 2, reply = 4
[epson2] e2_send: ESC F
[epson2] buf[0] 1b .
[epson2] buf[1] 46 F
[epson2] e2_send: cmd count, r = 3, w = 3
[epson2] e2_recv: size = 4, buf = 0x7fa4730c
[epson2] e2_recv: cmd count, r = 4, w = 3
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 00 .
[epson2] buf[3] 00 .
[epson2] status: 02
[epson2] ready
[epson2] no option equipment installed
[epson2] support extended commands
[epson2] detection with request_extended_status
[epson2] esci_request_extended_status
[epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa47344
[epson2] e2_send: size = 2, reply = 46
[epson2] e2_send: ESC f
[epson2] buf[0] 1b .
[epson2] buf[1] 66 f
[epson2] e2_send: cmd count, r = 4, w = 4
[epson2] e2_recv: size = 4, buf = 0x7fa472b4
[epson2] e2_recv: cmd count, r = 5, w = 4
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 2a *
[epson2] buf[3] 00 .
[epson2] e2_recv_info_block: payload length: 42
[epson2] e2_recv: size = 42, buf = 0x421a00
[epson2] e2_recv: cmd count, r = 6, w = 4
[epson2] buf[0] 00 .
[epson2] buf[1] 00 .
[epson2] buf[2] 00 .
[epson2] buf[3] 00 .
[epson2] buf[4] 00 .
[epson2] buf[5] 00 .
[epson2] buf[6] 00 .
[epson2] buf[7] 00 .
[epson2] buf[8] 00 .
[epson2] buf[9] 00 .
[epson2] buf[10] 00 .
[epson2] buf[11] c0 .
[epson2] buf[12] ec .
[epson2] buf[13] 13 .
[epson2] buf[14] 6c l
[epson2] buf[15] 1b .
[epson2] buf[16] 00 .
[epson2] buf[17] 00 .
[epson2] buf[18] 00 .
[epson2] buf[19] 00 .
[epson2] buf[20] 00 .
[epson2] buf[21] 00 .
[epson2] buf[22] 00 .
[epson2] buf[23] 00 .
[epson2] buf[24] 00 .
[epson2] buf[25] 00 .
[epson2] buf[26] 43 C
[epson2] buf[27] 58 X
[epson2] buf[28] 33 3
[epson2] buf[29] 38 8
[epson2] buf[30] 30 0
[epson2] buf[31] 30 0
[epson2] buf[32] 20
[epson2] buf[33] 20
[epson2] buf[34] 20
[epson2] buf[35] 20
[epson2] buf[36] 20
[epson2] buf[37] 20
[epson2] buf[38] 20
[epson2] buf[39] 20
[epson2] buf[40] 20
[epson2] buf[41] 20
[epson2] main = 00, ADF = 00, TPU = 00, main 2 = c0
[epson2] e2_set_model: model is 'CX3800'
[epson2] e2_set_fbf_area: 0.000000,0.000000 215.899994,297.179993 600 [mm]
[epson2] no command available to detect capabilities
[epson2] esci_request_identity2
[epson2] e2_cmd_info_block, params len = 2, reply len = 0, buf = 0x7fa47388
[epson2] e2_send: size = 2, reply = 0
[epson2] e2_send: ESC i
[epson2] buf[0] 1b .
[epson2] buf[1] 69 i
[epson2] e2_send: cmd count, r = 6, w = 5
[epson2] e2_recv: size = 4, buf = 0x7fa472c4
[epson2] e2_recv: cmd count, r = 7, w = 5
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 36 6
[epson2] buf[3] 00 .
[epson2] e2_recv_info_block: payload length: 54
[epson2] e2_recv: size = 54, buf = 0x421a30
[epson2] e2_recv: cmd count, r = 8, w = 5
[epson2] buf[0] 58 X
[epson2] buf[1] 02 .
[epson2] buf[2] 55 U
[epson2] buf[3] 00 .
[epson2] buf[4] 00 .
[epson2] buf[5] 00 .
[epson2] buf[6] 00 .
[epson2] buf[7] 00 .
[epson2] buf[8] 00 .
[epson2] buf[9] 00 .
[epson2] buf[10] 00 .
[epson2] buf[11] 00 .
[epson2] buf[12] 00 .
[epson2] buf[13] 00 .
[epson2] buf[14] 32 2
[epson2] buf[15] 00 .
[epson2] buf[16] 4b K
[epson2] buf[17] 00 .
[epson2] buf[18] 64 d
[epson2] buf[19] 00 .
[epson2] buf[20] 96 .
[epson2] buf[21] 00 .
[epson2] buf[22] c8 .
[epson2] buf[23] 00 .
[epson2] buf[24] 2c ,
[epson2] buf[25] 01 .
[epson2] buf[26] 90 .
[epson2] buf[27] 01 .
[epson2] buf[28] 58 X
[epson2] buf[29] 02 .
[epson2] buf[30] 00 .
[epson2] buf[31] 00 .
[epson2] buf[32] 32 2
[epson2] buf[33] 00 .
[epson2] buf[34] 4b K
[epson2] buf[35] 00 .
[epson2] buf[36] 64 d
[epson2] buf[37] 00 .
[epson2] buf[38] 96 .
[epson2] buf[39] 00 .
[epson2] buf[40] c8 .
[epson2] buf[41] 00 .
[epson2] buf[42] 2c ,
[epson2] buf[43] 01 .
[epson2] buf[44] 90 .
[epson2] buf[45] 01 .
[epson2] buf[46] 58 X
[epson2] buf[47] 02 .
[epson2] buf[48] 20
[epson2] buf[49] 03 .
[epson2] buf[50] b0 .
[epson2] buf[51] 04 .
[epson2] buf[52] 00 .
[epson2] buf[53] 00 .
[epson2] discovering max depth, NAKs are expected
[epson2] e2_esc_cmd: cmd = 0x44, val = 16
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC D
[epson2] buf[0] 1b .
[epson2] buf[1] 44 D
[epson2] e2_send: cmd count, r = 8, w = 6
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 9, w = 6
[epson2] buf[0] 06 .
[epson2] e2_cmd_simple: size = 1
[epson2] e2_send: size = 1, reply = 1
[epson2] buf[0] 10 .
[epson2] e2_send: cmd count, r = 9, w = 7
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 10, w = 7
[epson2] buf[0] 15 .
[epson2] e2_cmd_simple: NAK
[epson2] e2_esc_cmd: cmd = 0x44, val = 14
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC D
[epson2] buf[0] 1b .
[epson2] buf[1] 44 D
[epson2] e2_send: cmd count, r = 10, w = 8
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 11, w = 8
[epson2] buf[0] 06 .
[epson2] e2_cmd_simple: size = 1
[epson2] e2_send: size = 1, reply = 1
[epson2] buf[0] 0e .
[epson2] e2_send: cmd count, r = 11, w = 9
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 12, w = 9
[epson2] buf[0] 15 .
[epson2] e2_cmd_simple: NAK
[epson2] e2_esc_cmd: cmd = 0x44, val = 12
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC D
[epson2] buf[0] 1b .
[epson2] buf[1] 44 D
[epson2] e2_send: cmd count, r = 12, w = 10
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 13, w = 10
[epson2] buf[0] 06 .
[epson2] e2_cmd_simple: size = 1
[epson2] e2_send: size = 1, reply = 1
[epson2] buf[0] 0c .
[epson2] e2_send: cmd count, r = 13, w = 11
[epson2] e2_recv: size = 1, buf = 0x7fa47308
[epson2] e2_recv: cmd count, r = 14, w = 11
[epson2] buf[0] 15 .
[epson2] e2_cmd_simple: NAK
[epson2] maximum supported color depth: 8
[epson2] esci_request_focus_position
[epson2] setting focus is not supported
[epson2] esci_request_scanner_status
[epson2] e2_send: size = 2, reply = 16
[epson2] e2_send: FS F
[epson2] buf[0] 1c .
[epson2] buf[1] 46 F
[epson2] e2_send: cmd count, r = 14, w = 12
[epson2] e2_recv: size = 16, buf = 0x7fa4738c
[epson2] e2_recv: cmd count, r = 15, w = 12
[epson2] buf[0] 01 .
[epson2] buf[1] 00 .
[epson2] buf[2] 00 .
[epson2] buf[3] c0 .
[epson2] buf[4] 00 .
[epson2] buf[5] 00 .
[epson2] buf[6] 00 .
[epson2] buf[7] 00 .
[epson2] buf[8] 00 .
[epson2] buf[9] 00 .
[epson2] buf[10] 00 .
[epson2] buf[11] 00 .
[epson2] buf[12] 00 .
[epson2] buf[13] 00 .
[epson2] buf[14] 00 .
[epson2] buf[15] 00 .
[epson2] global status : 0x01
[epson2] warmup can be cancelled
[epson2] adf status : 0x00
[epson2] not installed
[epson2] not enabled
[epson2] tpu status : 0x00
[epson2] not installed
[epson2] not enabled
[epson2] device type : 0xc0
[epson2] main body status: 0x00
[epson2] e2_dev_post_init
[epson2] CCT model id is 0x57, profile offset 39
[epson2] esci_reset
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC @
[epson2] buf[0] 1b .
[epson2] buf[1] 40 @
[epson2] e2_send: cmd count, r = 15, w = 13
[epson2] e2_recv: size = 1, buf = 0x7fa473c0
[epson2] e2_recv: cmd count, r = 16, w = 13
[epson2] buf[0] 06 .
[epson2] scanner model: CX3800
[epson2] close_scanner: fd = 0
[epson2] esci_request_extended_status
[epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa47434
[epson2] e2_send: size = 2, reply = 46
[epson2] e2_send: ESC f
[epson2] buf[0] 1b .
[epson2] buf[1] 66 f
[epson2] e2_send: cmd count, r = 16, w = 14
[epson2] e2_recv: size = 4, buf = 0x7fa473a4
[epson2] e2_recv: cmd count, r = 17, w = 14
[epson2] buf[0] 02 .
[epson2] buf[1] 02 .
[epson2] buf[2] 2a *
[epson2] buf[3] 00 .
[epson2] e2_recv_info_block: payload length: 42
[epson2] e2_recv: size = 42, buf = 0x421a00
[epson2] e2_recv: cmd count, r = 18, w = 14
[epson2] buf[0] 00 .
[epson2] buf[1] 00 .
[epson2] buf[2] 00 .
[epson2] buf[3] 00 .
[epson2] buf[4] 00 .
[epson2] buf[5] 00 .
[epson2] buf[6] 00 .
[epson2] buf[7] 00 .
[epson2] buf[8] 00 .
[epson2] buf[9] 00 .
[epson2] buf[10] 00 .
[epson2] buf[11] c0 .
[epson2] buf[12] ec .
[epson2] buf[13] 13 .
[epson2] buf[14] 6c l
[epson2] buf[15] 1b .
[epson2] buf[16] 00 .
[epson2] buf[17] 00 .
[epson2] buf[18] 00 .
[epson2] buf[19] 00 .
[epson2] buf[20] 00 .
[epson2] buf[21] 00 .
[epson2] buf[22] 00 .
[epson2] buf[23] 00 .
[epson2] buf[24] 00 .
[epson2] buf[25] 00 .
[epson2] buf[26] 43 C
[epson2] buf[27] 58 X
[epson2] buf[28] 33 3
[epson2] buf[29] 38 8
[epson2] buf[30] 30 0
[epson2] buf[31] 30 0
[epson2] buf[32] 20
[epson2] buf[33] 20
[epson2] buf[34] 20
[epson2] buf[35] 20
[epson2] buf[36] 20
[epson2] buf[37] 20
[epson2] buf[38] 20
[epson2] buf[39] 20
[epson2] buf[40] 20
[epson2] buf[41] 20
[epson2] main = 00, ADF = 00, TPU = 00, main 2 = c0
[epson2] attach_one_config: len = 17, line = net autodiscovery
[epson2] e2_network_discovery, sent discovery packet
[epson2] e2_network_discovery, end
[epson2] sane_epson2_get_devices - results:
[epson2] 0 (3): CX3800
[saned] process_request: waiting for request
[saned] process_request: got request 2
[saned] process_request: access to resource `epson2' granted
[epson2] sane_epson2_open: name = libusb:001:010
[epson2] handle obtained
[epson2] open_scanner: libusb:001:010
[epson2] scanner opened
[epson2] esci_reset
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC @
[epson2] buf[0] 1b .
[epson2] buf[1] 40 @
[epson2] e2_send: cmd count, r = 18, w = 15
[epson2] e2_txrx: tx err, Error during device I/O
[epson2] e2_cmd_simple: failed, Error during device I/O
[epson2] close_scanner: fd = 0
[epson2] esci_request_extended_status
[epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7fa4863c
[epson2] e2_send: size = 2, reply = 46
[epson2] e2_send: ESC f
[epson2] buf[0] 1b .
[epson2] buf[1] 66 f
[epson2] e2_send: cmd count, r = 18, w = 16
[epson2] e2_cmd_info_block: failed, Error during device I/O
[saned] process_request: sane_open returned: Error during device I/O
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited
root at fritz:/var/mod/root# SANE_DEBUG_EPSON2=128 saned -d128
[saned] main: starting debug mode (level 128)
[saned] read_config: searching for config file
[saned] read_config: done reading config
[saned] saned (AF-indep+IPv6) from sane-backends 1.0.21 starting up
[saned] do_bindings: trying to get port for service "sane-port" (getaddrinfo)
[saned] do_bindings: " sane-port " service unknown on your host; you should
add
[saned] do_bindings: sane-port 6566/tcp saned # SANE network scanner
daemon
[saned] do_bindings: to your /etc/services file (or equivalent). Proceeding
anyway.
[saned] do_bindings: [0] socket () using IPv6
[saned] do_bindings: [0] setsockopt ()
[saned] do_bindings: [0] bind () to port 6566
[saned] do_bindings: [0] listen ()
[saned] do_bindings: [1] socket () using IPv4
[saned] do_bindings: [1] setsockopt ()
[saned] do_bindings: [1] bind () to port 6566
[saned] do_bindings: [1] bind failed: Address already in use
[saned] run_standalone: waiting for control connection
[saned] handle_connection: processing client connection
[saned] check_host: detected an IPv4-mapped address
[saned] check_host: access by remote host: ::ffff:192.168.1.8
[saned] check_host: remote host is not IN_LOOPBACK nor IN6_LOOPBACK
[saned] check_host: local hostname: fritz.fonwlan.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: local hostname(s) (from DNS): fritz.box
[saned] check_host: remote host doesn't have same addr as local
[saned] check_host: opening config file: /etc/hosts.equiv
[saned] check_host: can't open config file: /etc/hosts.equiv (No such file or
directory)
[saned] check_host: opening config file: saned.conf
[saned] check_host: config file line: `192.168.1.0/24'
[saned] check_host: subnet with base IP = 192.168.1.0, CIDR netmask = 24
[saned] check_host: access granted from IP address 192.168.1.8 (in subnet
192.168.1.0/24)
[saned] init: access granted
[saned] init: access granted to saned-user@::ffff:192.168.1.8
[saned] process_request: waiting for request
[saned] process_request: got request 1
[sanei_debug] Setting debug level of epson2 to 128.
[epson2] sane_epson2_init: sane-backends 1.0.21
[epson2] epson2 backend, version 1.0.124
[epson2] sane_epson2_get_devices
[epson2] probe_devices
[epson2] free_devices
[epson2] attach_one_config: len = 10, line = scsi EPSON
[epson2] attach_one_config: len = 3, line = usb
[epson2] attach_one_usb: dev = libusb:001:010
[epson2] attach: devname = libusb:001:010, type = 3
[epson2] e2_dev_init
[epson2] open_scanner: libusb:001:010
[epson2] scanner opened
[epson2] found valid Epson scanner: 0x4b8/0x818 (vendorID/productID)
[epson2] e2_set_model: model is 'generic'
[epson2] esci_reset
[epson2] e2_cmd_simple: size = 2
[epson2] e2_send: size = 2, reply = 1
[epson2] e2_send: ESC @
[epson2] buf[0] 1b .
[epson2] buf[1] 40 @
[epson2] e2_send: cmd count, r = 0, w = 1
[epson2] e2_txrx: tx err, Error during device I/O
[epson2] e2_cmd_simple: failed, Error during device I/O
[epson2] close_scanner: fd = 0
[epson2] esci_request_extended_status
[epson2] e2_cmd_info_block, params len = 2, reply len = 42, buf = 0x7faf23c4
[epson2] e2_send: size = 2, reply = 46
[epson2] e2_send: ESC f
[epson2] buf[0] 1b .
[epson2] buf[1] 66 f
[epson2] e2_send: cmd count, r = 0, w = 2
[epson2] e2_cmd_info_block: failed, Error during device I/O
[epson2] attach_one_config: len = 17, line = net autodiscovery
[epson2] e2_network_discovery, sent discovery packet
[epson2] e2_network_discovery, end
[epson2] sane_epson2_get_devices - results:
[saned] process_request: waiting for request
[saned] process_request: got request 10
[saned] bailing out, waiting for children...
[saned] bail_out: all children exited
The system:
uname -a
Linux fritz.fonwlan.box 2.6.19.2 #1 Tue Jan 18 13:10:25 CET 2011 mips
GNU/Linux
Ram: 60636 kB , there is 8236 kB free
Actually there is just the Epson connectet to the Box-USB The Printer-Part
allways works fine, but just without info about ink etc
Hope, someone can help
Thanks,
Greetz, Christoph
--
GPG-Fingerprint: 171A 6F66 52E5 A6CE D664 2427 832F E711 7442 8261
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 198 bytes
Desc: This is a digitally signed message part.
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20110120/7e7a438b/attachment-0001.pgp>
More information about the sane-devel
mailing list