[sane-devel] HP Scanjet 5000 Sheet-feed Scanner (L2715A)
m. allan noah
kitno455 at gmail.com
Mon Mar 21 17:34:41 UTC 2011
If it's not on our list, we don't know about it. Looks physically
similar to the N6010?
allan
On Mon, Mar 21, 2011 at 12:45 PM, Stephen Peters
<steve-sane-devel at killbygayford.co.uk> wrote:
> Hello,
>
> I have an HP Scanjet 5000 Sheet-feed Scanner (L2715A) which does not seem to
> be supported yet according to the sane page here:
> http://www.sane-project.org/lists/sane-mfgs-cvs.html.
>
> I am trying to use it with Debian Squeeze. Is this scanner really not
> supported or is Debian not fully up to date with current scanner backends?
>
> Thanks in advance for your help,
>
> Stephen.
>
> PS here is some hopefully informative output about this device:
>
> Output from "lsusb"
> Bus 001 Device 007: ID 03f0:2e05 Hewlett-Packard
>
> Output from "sane-find-scanner -v -v"
>
> This is sane-find-scanner from sane-backends 1.0.21
>
> # sane-find-scanner will now attempt to detect your scanner. If the
> # result is different from what you expected, first make sure your
> # scanner is powered up and properly connected to your computer.
>
> <snip>
>
> trying libusb:
>
> <device descriptor of 0x03f0/0x2e05 at 001:006 (Language Error Language
> Error)>
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x03F0
> idProduct 0x2E05
> bcdDevice 0.01
> iManufacturer 1 (Language Error)
> iProduct 2 (Language Error)
> iSerialNumber 3 (Language Error)
> bNumConfigurations 1
> <configuration 0>
> bLength 9
> bDescriptorType 2
> wTotalLength 39
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0 ()
> bmAttributes 192 (Self-powered)
> MaxPower 4 mA
> <interface 0>
> <altsetting 0>
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 3
> bInterfaceClass 255
> bInterfaceSubClass 255
> bInterfaceProtocol 255
> iInterface 5 (Language Error)
> <endpoint 0>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x82 (in 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 1>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 (out 0x02)
> bmAttributes 2 (bulk)
> wMaxPacketSize 512
> bInterval 0 ms
> bRefresh 0
> bSynchAddress 0
> <endpoint 2>
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 (in 0x01)
> bmAttributes 3 (interrupt)
> wMaxPacketSize 64
> bInterval 11 ms
> bRefresh 0
> bSynchAddress 0
>
> <trying to find out which USB chip is used>
> checking for GT-6801 ...
> this is not a GT-6801 (bDeviceClass = 0)
> checking for GT-6816 ...
> this is not a GT-6816 (bcdUSB = 0x200)
> checking for GT-8911 ...
> this is not a GT-8911 (check 2, bcdUSB = 0x200)
> checking for MA-1017 ...
> this is not a MA-1017 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for MA-1015 ...
> this is not a MA-1015 (bDeviceClass = 0)
> checking for MA-1509 ...
> this is not a MA-1509 (bDeviceClass = 0)
> checking for LM983[1,2,3] ...
> this is not a LM983x (bcdUSB = 0x200)
> checking for GL646 ...
> this is not a GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL646_HP ...
> this is not a GL646_HP (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL660+GL646 ...
> this is not a GL660+GL646 (bDeviceClass = 0, bInterfaceClass = 255)
> checking for GL84x ...
> this is not a GL84x (bDeviceClass = 0, bInterfaceClass = 255)
> checking for ICM532B ...
> this is not a ICM532B (check 1, bDeviceClass = 0, bInterfaceClass = 255)
> checking for PV8630/LM9830 ...
> this is not a PV8630/LM9830 (bcdUSB = 0x200)
> checking for M011 ...
> this is not a M011 (bDeviceClass = 0)
> checking for RTS8822 ...
> this is not a RTS8822 (bEndpointAddress = 0x82, bmAttributes = 0x2,
> wMaxPacketSize = 0x200, bInterval = 0x0)
> checking for rts8858c ...
> this is not a rts8858c (bcdUSB = 0x200)
> checking for SQ113 ...
> this is not a SQ113 (bEndpointAddress = 0x82, bmAttributes = 0x2,
> wMaxPacketSize = 0x200, bInterval = 0x0)
> checking for HP4500C/4570C/5500C/5550C/5590/7650 chipset ...
> this is not a HP4500C/4570C/5500C/5550C/5590/7650 chipset (bDeviceClass =
> 0)
> checking for rts8801/rts8891 ...
> this is not a rts8801/rts8891 (bcdUSB = 0x200)
> <Couldn't determine the type of the USB chip (result from sane-backends
> 1.0.21)>
>
> found USB scanner (vendor=0x03f0 [Language Error], product=0x2e05 [Language
> Error]) at libusb:001:006
>
> <snip>
>
> The contents of this e-mail, any attachment and response string are
> privileged and confidential and intended for the addressee only. Its
> contents may not be copied or disclosed to anyone other than the intended
> recipient. If this e-mail is received in error, please contact Killby &
> Gayford Limited immediately with details of the sender and addressee and
> delete the e-mail. Internet communications are not secure and therefore
> Killby & Gayford Limited does not accept legal responsibility for the
> contents of this message as it has been transmitted over a public network.
> Killby & Gayford Limited is a private limited company registered in England
> with registration number 628491 and its registered office at 171E Wingate
> Square, London SW4 0AN.
>
> Please consider the environment before printing this message or its
> contents.
>
>
> --
> sane-devel mailing list: sane-devel at lists.alioth.debian.org
> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
> Unsubscribe: Send mail with subject "unsubscribe your_password"
> to sane-devel-request at lists.alioth.debian.org
>
--
"The truth is an offense, but not a sin"
More information about the sane-devel
mailing list