[sane-devel] Canoscan FB1200S

[Chris]

hi Allan
the contents of canon.conf
#canon.conf
/dev/scanner
#/dev/sg0

On 04/05/11 20:50, m. allan noah wrote:
> what are the contents of /etc/sane.d/canon.conf?
>
> allan
>
> On Mon, May 2, 2011 at 2:53 AM, Chris<esky64 at tpg.com.au>  wrote:
>> Hi Trying to get my scanner working but not sure where to go next
>>
>> chris at chris-desktop:~$ sudo scanimage -L
>> [sudo] password for chris:
>>
>> No scanners were identified. If you were expecting something different,
>> check that the scanner is plugged in, turned on and detected by the
>> sane-find-scanner tool (if appropriate). Please read the documentation
>> which came with this software (README, FAQ, manpages).
>> chris at chris-desktop:~$ ^C
>> chris at chris-desktop:~$ sane-find-scanner
>>
>> # sane-find-scanner will now attempt to detect your scanner. If the
>> # result is different from what you expected, first make sure your
>> # scanner is powered up and properly connected to your computer.
>>
>> found SCSI scanner "CANON IX-12015E 1.07" at /dev/sg0
>> # Your SCSI scanner was detected. It may or may not be supported by SANE.
>> Try
>> # scanimage -L and read the backend's manpage.
>>
>> # No USB scanners found. If you expected something different, make sure that
>> # you have loaded a kernel driver for your USB host controller and have
>> setup
>> # the USB system correctly. See man sane-usb for details.
>>
>> # Not checking for parallel port scanners.
>>
>> # Most Scanners connected to the parallel port or other proprietary ports
>> # can't be detected by this program.
>>
>> # You may want to run this program as root to find all devices. Once you
>> # found the scanner devices, be sure to adjust access permissions as
>> # necessary.
>>
>>
>> --
>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>> http://lists.alioth.debian.org/mailman/listinfo/sane-devel
>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>             to sane-devel-request at lists.alioth.debian.org
>>
>
>
>