[sane-devel] Canon Pixma MX435 Detection

[Nicholas Elliott]

Hi,

I'm running Kubuntu 12.04 amd64. I've installed cups-bnjp and can print
wirelessly to the printer through CUPS.

I've installed xsane and the latest sane-backends:
scanimage -V
scanimage (sane-backends) 1.0.24git; backend version 1.0.22

sane-find-scanner finds the scanner:
found USB scanner (vendor=0x04a9 [Canon], product=0x175b [MX430 series]) at
libusb:001:002

scanimage -L does not find the scanner
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).

If I run scanimage in debug it finds my wireless network scanner but at the
end of its detection process it reports that no devices were found:
[sanei_debug] Setting debug level of pixma to 11.
[pixma] pixma is compiled with pthread support.
[pixma] pixma version 0.16.2
[pixma] sanei_bjnp_find_devices:
[pixma] Adding configured scanner: bjnp://192.168.1.76
[pixma] bjnp_allocate_device(bjnp://192.168.1.76)[pixma] udp_command:
Sending UDP command to 192.168.1.76:8612
[pixma] Scanner identity string = MFG:Canon;CMD:MultiPass
2.1,IVEC;MDL:MX430 series;CLS:IMAGE;DES:Canon MX430 series;SOJ:BJNP2,BJNPe;~
[pixma] Scanner model = Canon MX430 series
[pixma] Added all configured scanners, now do auto detection...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] eth1 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] eth1 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] eth1 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] eth1 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] eth1 is not a valid IPv4 interface, skipping...
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is IPv4 capable, sending broadcast..
[pixma] lo is not a valid IPv4 interface, skipping...
[pixma] eth0 is not a valid IPv4 interface, skipping...
[pixma] scanner discovery finished...
[pixma] pixma_find_scanners() found 0 devices

So, did it actually find my wireless network scanner and, if so, why does
it tell me that no devices were found?

Is there something else I need to do or that you would like me to try?

FYI Wireless scanning with Canon ScanGearMP works.

Thanks

Nick
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120830/32ed522d/attachment-0001.html>