[sane-devel] Canon MG5150

[Remy Keil]

Hi Rolf,

thanks a lot for your feedback.

I successfully installed the latest version from git.

$ git clone git://git.debian.org/sane/sane-backends.git
$ ./configure
$ make
$ make install

$ scanimage -V
scanimage (sane-backends) 1.0.24git; backend version 1.0.24

$ sane-find-scanner -v
This is sane-find-scanner from sane-backends 1.0.24git
...
searching for USB scanners:
...
checking /dev/usb/scanner15... failed to open (Invalid argument)
...
checking /dev/usbscanner15... failed to open (Invalid argument)
libusb not available
                                 << ???
  # No USB scanners found. If you expected something different, make sure
that
  # you have loaded a kernel driver for your USB host controller and have
setup
  # the USB system correctly. See man sane-usb for details.
  # SANE has been built without libusb support. This may be a reason
       << ???
  # for not detecting USB scanners. Read README for more details.
     << ???

"libusb not available" ...
so after updating to the new sane version there seems to be a problem
between sane and libusb.

I read the sane usb manpages, but nothing found for this case. libusb is
installed and was working with sane 1.0.21.

$ rpm -qa | grep libusb
libusb1-1.0.9-0.5.rc1.el6.x86_64
libusb-0.1.12-23.el6.x86_64

$ lsusb | grep Canon
Bus 001 Device 006: ID 04a9:1748 Canon, Inc. Pixma MG5150

Any suggestions?

Thanks a lot for your help!

Cheers,
Rémy



On Thu, Dec 27, 2012 at 1:13 PM, Rolf Bensch <webmaster at bensch-online.de>wrote:

> Hi Remy,
>
> You need to install Sane 1.0.24 from git. Please follow the installation
> description in README.linux.
>
> The driver for MG5100 may be buggy.
>
> Please report your success and bugs here again.
>
> Cheers,
> Rolf
>
>
>
> Am 26.12.2012 17:43, schrieb Remy Keil:
> > Hi All,
> >
> > I'm new to the sane-devel mailing list. I hope it's the right place to
> > get support ;) And maybe I can help you too, by testing this device.
> > Over my holidays I started to migrate my little atom server from windows
> > to linux. It's used as a print and fileserver.
> >
> > I'm running SANE on centOS 6.3 (x86_64). MFP is attached via usb.
> >
> > until now I wasn't able to get the scanner recognized by SANE.
> >
> > $ sane-find-scanner -q
> > found USB scanner (vendor=0x04a9 [Canon], product=0x1748 [MG5100
> > series]) at libusb:001:004
> >
> > $ scanimage
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > WARNING: Deprecated config file /etc/modprobe.conf, all config files
> > belong into /etc/modprobe.d/.
> > scanimage: no SANE devices found
> >
> > $ lsusb
> > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > Bus 001 Device 002: ID 1058:1010 Western Digital Technologies, Inc.
> > Elements External HDD
> > Bus 001 Device 004: ID 04a9:1748 Canon, Inc. Pixma MG5150
> > Bus 003 Device 002: ID 04e8:3256 Samsung Electronics Co., Ltd ML-1520
> > Laser Printer
> >
> > $ ls -la /dev/usb/lp0
> > crw-rw----. 1 root lp 180, 0 Dec 26 16:45 /dev/usb/lp0
> >
> > steps I've done until now:
> > - installed canon printer driver
> > - installed canon scanner driver
> > - added printer to CUPS > printing is working
> > - scanning not working so far..
> > - added entry to /lib/udev/rules.d/65-libsane.rules
> >     # Canon PIXMA MG5150
> >     ATTRS{idVendor}=="04a9", ATTRS{idProduct}=="1748",
> > ENV{libsane_matched}="yes"
> > - still not working...
> >
> > installed packuages:
> > cnijfilter-common-3.40-1.x86_64
> > cnijfilter-mg5100series-3.40-1.x86_64
> > scangearmp-common-1.60-1.x86_64
> > scangearmp-mg5100series-1.60-1.x86_64
> > sane-frontends-1.0.14-9.2.el6.x86_64
> > sane-backends-1.0.21-3.el6.x86_64
> > sane-backends-libs-gphoto2-1.0.21-3.el6.x86_64
> > sane-backends-libs-1.0.21-3.el6.x86_64
> >
> > I hope I can get it working with your help, I don't want to do a
> > rollback to windows :-))
> >
> > Cheers,
> > Remy
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20121228/e430feaf/attachment.html>