[sane-devel] Canon Pixma MX375 problem

[Rolf Bensch]

Hi Ivan,

You can find an old version on the website:
http://www.sane-project.org/README.linux.

or the latest one in git; fetch a r/o clone with: '$ git clone
git://git.debian.org/sane/sane-backends.git'.

Cheers,
Rolf


Am 28.12.2012 19:22, schrieb Ivan G.:
> Hi rolf, 
> 
> i lookedd at README.linux, but i cannot find where it can help me. 
> Since:
> 1. i installed it using gentoo package manager
> 2. the scanner is recognized by sane, but i get the error:
>           scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
> 3. The usb flag is set for sane package. 
> 
> Or maybe i missed the point with the solution in README.linux? 
> 
> Any other idea? 
> 
> Cheers, 
> Ivan
> 
> 
> 
> ----- Messaggio originale -----
> Da: Rolf Bensch <webmaster at bensch-online.de>
> A: Ivan Ivello <dreamos82 at yahoo.it>
> Cc: "sane-devel at lists.alioth.debian.org" <sane-devel at lists.alioth.debian.org>
> Inviato: Venerdì 28 Dicembre 2012 14:40
> Oggetto: Re: [sane-devel] Canon Pixma MX375 problem
> 
> Hi Ivan,
> 
> Please follow the installation description in README.linux.
> 
> Cheers,
> Rolf
> 
> 
> Am 27.12.2012 23:26, schrieb Ivan Ivello:
>> Hi all, 
>>
>> i'm trying configure the Pixma MX375 scanner on gentoo, i followed steps done by Daniel on a previous post (here: http://lists.alioth.debian.org/pipermail/sane-devel/2012-August/030229.html) 
>>
>> I installed sane-backends 1.0.23 with (compiled with  sane_backends_pixma use flag enabled) and activated debug mode. 
>>
>> Then sane-find-scanner seems to find the scanner:
>>   
>>    # sane-find-scanner will now attempt to detect your scanner. If the
>>    # result is different from what you expected, first make sure your
>>    # scanner is powered up and properly connected to your computer.
>>
>>    # No SCSI scanners found. If you expected something different, make sure that
>>    # you have loaded a kernel SCSI driver for your SCSI adapter.
>>
>> found USB scanner (vendora9 [Canon], product=0x1759 [MX370 series]) at libusb:002:005
>>    # Your USB scanner was (probably) detected. It may or may not be supported by
>>    # SANE. Try scanimage -L and read the backend's manpage.
>>
>>    # Not checking for parallel port scanners.
>>
>>    # Most Scanners connected to the parallel port or other proprietary ports
>>
>> But any other command that try to access the scanner receive the following error: 
>>
>>
>> root ~#scanimage > test.pnm
>> scanimage: open of device pixma:04A91759_72024A failed: Operation not supported
>>
>> Any idea?
>>
>> Regards,
>> Ivan
>>
>>
> 
> 
>