[sane-devel] genesys Canoscan 5600F
Fabio Impagliazzo
fabioimpa at yahoo.it
Mon Jan 16 15:30:40 UTC 2012
My Canoscan 5600F don't work (sorry for my english)
This is some informations from terminal:
:~$ scanimage -V
scanimage (sane-backends) 1.0.23git; backend version 1.0.23
:~$ sane-find-scanner
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make
sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x04a9 [Canon], product=0x1906 [CanoScan],
chip=GL847) at libusb:001:008
# Your USB scanner was (probably) detected. It may or may not be
supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
# necessary.
:~$ sudo scanimage -L
device `genesys:libusb:001:008' is a Canon 5600F flatbed scanner
:~$ scanimage -T
[genesys] WARNING: Your scanner is not fully supported or at least
[genesys] had only limited testing. Please be careful and
[genesys] report any failure/success to
[genesys] sane-devel at lists.alioth.debian.org. Please provide as
many
[genesys] details as possible, e.g. the exact name of your
[genesys] scanner and what does (not) work.
when i try to acquire images from xsane the program say that there is a
problem of 0/1
Thats all.
Fabio
More information about the sane-devel
mailing list