[sane-devel] Canon 9000F

[Sergey Zolotaryov]

Hi Kerstin,

I think this may be the issue. I'll try to cleanup everything I've
installed last night :) and then start clean. You know us noobs - we try
part of a solution from one blog, then the other from the second blog and
then post our problems to the third one. I'll write up what happens today
in the evening.

Again sorry to disturb you all, thank you for fast replies.

2012/5/11 Kerstin Hoef-Emden <aeb25 at uni-koeln.de>

>
> Hi,
>
> did you uninstall the older sane version of the distribution before? This
> caused in my case problems.
>
> Best wishes,
>
> Kerstin
>
>
> On Fri, 11 May 2012, Sergey Zolotaryov wrote:
>
>  Good afternoon,
>>
>> Yesterday I started setting up my CanoScan 9000F. According to the docs
>> sane supports this scaner since last year. I compiled the sources for
>> sane-backend (with libusb) the sane-find-scaner output is the following:
>>
>> anydoby at anydoby-System-Product-Name:~/sane/sane-backends/backend$
>> sane-find-scanner
>>
>> # sane-find-scanner will now attempt to detect your scanner. If the
>> # result is different from what you expected, first make sure your
>> # scanner is powered up and properly connected to your computer.
>>
>> # No SCSI scanners found. If you expected something different, make sure
>> that
>> # you have loaded a kernel SCSI driver for your SCSI adapter.
>>
>> found USB scanner (vendor=0x04a9, product=0x1908) at libusb:002:012
>> found USB scanner (vendor=0x0df6, product=0x0040) at libusb:001:004
>> # Your USB scanner was (probably) detected. It may or may not be supported
>> by
>> # SANE. Try scanimage -L and read the backend's manpage.
>>
>> # Not checking for parallel port scanners.
>>
>> # Most Scanners connected to the parallel port or other proprietary ports
>> # can't be detected by this program.
>>
>> # You may want to run this program as root to find all devices. Once you
>> # found the scanner devices, be sure to adjust access permissions as
>> # necessary.
>>
>>
>> I assume the  (vendor=0x04a9, product=0x1908) is my scanner, as for the
>> second line, I suspect this is my webcam.
>>
>> The scanimage -L output is not good:
>>
>> anydoby at anydoby-System-Product-Name:~/sane/sane-backends/backend$
>> scanimage
>> -L
>> device `v4l:/dev/video0' is a Noname VF0610 Live! Cam Socialize HD virtual
>> device
>>
>> I do not see the scaner. I have added an entry "usb 0x04a9 0x1908" to the
>> /etc/sane.d/pixma.conf as was recommended in some post on the topic, but
>> still nothing is detected. What can I do about it? I am sure that the
>> scaner works, as under Windows it worked ok.
>>
>>
>>
> --
>
> PD Dr. Kerstin Hoef-Emden                       Zülpicher Str. 47b
> Universität zu Köln                             50674 Köln
> Biozentrum Köln (Cologne Biocenter)             Germany
> Botanisches Institut
>
> http://www.uni-koeln.de/~aeb25/




-- 
Best regards,
Sergey Zolotaryov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.alioth.debian.org/pipermail/sane-devel/attachments/20120511/f2ce0769/attachment.html>