[sane-devel] Debugging sane-find-scanner/scanimage

[Rogan Dawes]

On 31/05/2012 21:17, m. allan noah wrote:
> Arm can be either.
>
> allan

In this case, I believe it is Little Endian.

Rogan

>
> On Thu, May 31, 2012 at 3:07 PM, Rogan Dawes<rogan at dawes.za.net>  wrote:
>> On 31/05/2012 17:35, m. allan noah wrote:
>>>
>>> Is this machine big-endian cpu?
>>>
>>> allan
>>
>>
>> Hi Allan,
>>
>> It is ARM, which I believe is Little Endian.
>>
>> Rogan
>>
>>
>>>
>>> On Thu, May 31, 2012 at 11:23 AM, Rogan Dawes<rogan at dawes.za.net>    wrote:
>>>>
>>>> [Resending due to no responses after more than a week]
>>>>
>>>> Hi folks,
>>>>
>>>> I am using SANE (scanimage (sane-backends) 1.0.22; backend version
>>>> 1.0.22) on OpenWRT Backfire 10.3.1 on a Buffalo WZR-HP-G300NH,
>>>> attempting to interface with a Samsung SCX4300 MFP.
>>>>
>>>> This device is supported by the xerox_mfp backend, and has worked in the
>>>> past. Now, for some odd reason, it is failing to detect the scanner.
>>>>
>>>> Here is the debugging output I have managed to obtain:
>>>>
>>>> root at gw:/# SANE_DEBUG_XEROX_MFP=128  SANE_DEBUG_SANEI_USB=4
>>>> sane-find-scanner
>>>>
>>>>   # sane-find-scanner will now attempt to detect your scanner. If the
>>>>   # result is different from what you expected, first make sure your
>>>>   # scanner is powered up and properly connected to your computer.
>>>>
>>>>   # No SCSI scanners found. If you expected something different, make
>>>> sure that
>>>>   # you have loaded a kernel SCSI driver for your SCSI adapter.
>>>>   # Also you need support for SCSI Generic (sg) in your operating system.
>>>>   # If using Linux, try "modprobe sg".
>>>>
>>>> [sanei_debug] Setting debug level of sanei_usb to 4.
>>>> [sanei_usb] sanei_usb_init: marking existing devices
>>>> [sanei_usb] sanei_usb_init: Looking for kernel scanner devices
>>>> [sanei_usb] sanei_usb_init: Looking for libusb devices
>>>> [sanei_usb] sanei_usb_init: found libusb device (0x067b/0x2303)
>>>> interface 0  at libusb:001:007
>>>> [sanei_usb] store_device: add dn 0 with libusb:001:007
>>>> [sanei_usb] sanei_usb_init: found libusb device (0x04e8/0x342e)
>>>> interface 0  at libusb:001:006
>>>> [sanei_usb] store_device: add dn 1 with libusb:001:006
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner0' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner1' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner2' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner3' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner4' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner5' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner5' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner7' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner8' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner9' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner10' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner11' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner12' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner13' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner14' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usb/scanner15' in
>>>> list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner0' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner1' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner2' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner3' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner4' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner5' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner6' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner7' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner8' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner9' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner10' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner11' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner12' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner13' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner14' in list
>>>> [sanei_usb] sanei_usb_open: can't find device `/dev/usbscanner15' in list
>>>> found USB scanner (vendor=0x067b [Prolific Technology Inc.],
>>>> product=0x2303 [USB-Serial Controller]) at libusb:001:007
>>>> found USB scanner (vendor=0x04e8 [Samsung], product=0x342e [SCX-4300
>>>> Series]) at libusb:001:006
>>>>   # Your USB scanner was (probably) detected. It may or may not be
>>>> supported by
>>>>   # SANE. Try scanimage -L and read the backend's manpage.
>>>>
>>>>   # Not checking for parallel port scanners.
>>>>
>>>>   # Most Scanners connected to the parallel port or other proprietary
>>>> ports
>>>>   # can't be detected by this program.
>>>> root at gw:/#
>>>>
>>>>
>>>> As can be seen above, sane-find-scanner identifies the USB device
>>>> representing the SCX4300.
>>>>
>>>> My dll.conf contains:
>>>>
>>>> root at gw:/# cat /etc/sane.d/dll.conf
>>>> xerox_mfp
>>>> root at gw:/#
>>>>
>>>> And my xerox_mfp.conf contains:
>>>>
>>>> root at gw:/# cat /etc/sane.d/xerox_mfp.conf
>>>> #xerox_mfp.conf
>>>>
>>>> # Samsung SCX-4300
>>>> usb 0x04e8 0x342e
>>>> root at gw:/#
>>>>
>>>> scanimage -L, however, fails to identify this device:
>>>>
>>>> root at gw:/# SANE_DEBUG_XEROX_MFP=128  SANE_DEBUG_SANEI_USB=4 scanimage -L
>>>> [sanei_debug] Setting debug level of xerox_mfp to 128.
>>>> [xerox_mfp] sane_init: Xerox backend (build 12), version != null,
>>>> authorize != null
>>>> [sanei_debug] Setting debug level of sanei_usb to 4.
>>>> [sanei_usb] sanei_usb_init: marking existing devices
>>>> [sanei_usb] sanei_usb_init: Looking for kernel scanner devices
>>>> [sanei_usb] sanei_usb_init: Looking for libusb devices
>>>> [sanei_usb] sanei_usb_init: found libusb device (0x067b/0x2303)
>>>> interface 0  at libusb:001:007
>>>> [sanei_usb] store_device: add dn 0 with libusb:001:007
>>>> [sanei_usb] sanei_usb_init: found libusb device (0x04e8/0x342e)
>>>> interface 0  at libusb:001:006
>>>> [sanei_usb] store_device: add dn 1 with libusb:001:006
>>>> [xerox_mfp] sane_xerox_mfp_get_devices: 0x7fcb5f60, 0
>>>> [sanei_usb] sanei_usb_find_devices: vendor=0x04e8, product=0x342e
>>>> [xerox_mfp] list_one_device: libusb:001:006
>>>>
>>>> No scanners were identified. If you were expecting something different,
>>>> check that the scanner is plugged in, turned on and detected by the
>>>> sane-find-scanner tool (if appropriate). Please read the documentation
>>>> which came with this software (README, FAQ, manpages).
>>>> root at gw:/#
>>>>
>>>> It seems to notice the existence of the device, reporting:
>>>>
>>>> [xerox_mfp] list_one_device: libusb:001:006
>>>>
>>>> but it does nothing more than that.
>>>>
>>>> Does anyone have suggestions as to what I can try to debug this further?
>>>>
>>>> Many thanks
>>>>
>>>> Rogan Dawes
>>>>
>>>> --
>>>> sane-devel mailing list: sane-devel at lists.alioth.debian.org
>>>> http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/sane-devel
>>>> Unsubscribe: Send mail with subject "unsubscribe your_password"
>>>>             to sane-devel-request at lists.alioth.debian.org
>>>
>>>
>>>
>>>
>>
>
>
>