[sane-devel] Problem with Button of HP ScanJet 6200C Scanner and scanbd

[Wilhelm]

Am 13.11.2012 08:01, schrieb Thomas Boll:
> Hello,
>
> I am trying to get my button of a HP ScanJet 6200C to work under Debian.
>
> I already posted a message on
> http://sourceforge.net/projects/scanbd/forums/forum/897647/topic/6066075
> but got no reply.
> On the scanbd page the SANE support is linked as page for support
> questions. So this is my last chance to get any reply related to ma problem.

Sorry for that ...

>
> Follwing a copy of my Request on the scanbd SourceForge page:
>
> 2012-10-27 06:33:53 PDT
> Hello everybody, I am stuck now while trying to get the button of my
> scanner to work. So maybe anybody here can/is willing to help me with this.
>
> What I have: Running Debian squeeze on a x86 thin client server
> IP in my LAN: 192.168.100.10
>
> What I did:
>
> 1. downloaded latest sources with: svn co
> https://scanbd.svn.sourceforge.net/svnroot/scanbd scanbd
> 2. compile it with: USE_SANE=yes make -e clean all
> 3. install it with: checkinstall -D make install
>

please post the log-file (syslog) when starting the scanbd.

> Some Outputs: |
>
> root at server:/home/me# scanimage -L
> device `hp:libusb:001:007' is a Hewlett-Packard ScanJet 62x0C flatbed
> scanner | |
> root at server:/usr/local/etc/scanbd# scanbd -m -d 128
> scanbd: debug on: level: 7
> scanbd: Entering manager mode
> scanbd: dbus signal saned-start
> scanbd: dbus_init scanbd: dbus match
> type='signal',interface='org.freedesktop.Hal.Manager'
> scanbd: now sending signal saned_begin
> scanbd: manager mode: dbus
> scanbd: calling dbus method: aquire
> scanbd: dbus_call_method
> scanbd: waiting for reply
> scanbd: forking subprocess for saned
> scanbd: waiting for saned
> scanbd: Setting environment: SANE_CONFIG_DIR=/usr/local/etc/scanbd
> scanbd: saned exited with status: 0
> scanbd: calling dbus method: release
> scanbd: dbus_call_method scanbd: waiting for reply
> scanbd: dbus signal saned-end
> scanbd: now sending signal saned_end
>
> |My Configuration files: /etc/saned/dll.conf |
>
> net # hp |
>
> /etc/saned/net.conf |
>
> connect_timeout=10
> # localhost |
>
> /etc/saned/saned.conf |
>
> # 192.168.100.0/24
> # 192.168.100.10 |
>
> /etc/inetd.conf
>
> |sane-port stream tcp nowait saned.saned /usr/local/bin/scanbd scanbd -m
> -c /usr/local/etc/scanbd/scanbd.conf |
>
> /usr/local/etc/scanbd/dll.conf |
>
> net
> # hp |
>
> /usr/local/etc/scanbd/net.conf |
>
> connect_timeout=10 localhost |
>
> /usr/local/etc/scanbd/saned.conf |
>
> 192.168.100.0/24
> 192.168.100.10 |
>
> The scanbd.conf is long and is unmodified by me.
>
> If someone could point me into the right direction would be great.
> I try for days now and this is going to drive me mad! Also tried
> scanbuttond with no luck.
>
> Thanks for reading.
> me., thomas
>
> Best Regards,
> Thomas Boll
>
>


-- 
Wilhelm