[sane-devel] scanbd works but not buttons

[Wilhelm]

Am 26.11.2012 09:48, schrieb Алексей:
> On Mon, Nov 26, 2012 at 07:53:55AM +0100, Wilhelm wrote:
>> Hello Alexey,
>>
>> Am 26.11.2012 06:50, schrieb Alexey Smirnoff:
>>>
>>> But when I start scanbd directry and pressing keys on a scanner, I do not see
>>> anything related in the debug output, it only says `Iteration on dbus call´
>>> every second:
>>>
>>> ...
>>> /usr/local/bin/scanbd: Iteration on dbus call
>>>
>>> ...
>>>
>>> What am I doing wrong?
>>
>> please show also your scanbd.conf. The scanner isn't recognized at all.
>>
>>
>> --
>> Wilhelm
>>
>
> http://dpaste.com/hold/836724/
> I did not changed anything in this file
> Idk if I need to change something.
>
> Here are other config files:
>
> storage ~ # cat /etc/sane.d/net.conf
> connect_timeout = 3
> # scanbd-host1.local.net   # the host with the scanbd running (and the attached scanners with buttons)
> # scanbd-host2.local.net # there can be more than one scanbd one the net (and attached scanners with buttons)
> # sane-host.local.net    # there can also be a sane host without scanbd running (and scanner without buttons)
> localhost              # if desktop machine with scanbd AND scan-applications like xsane
>
> storage ~ # cat /etc/sane.d/dll.conf
> # enable the next line if you want to allow access through the network:
> net
>
> storage ~ # grep -Ev '^#|^$' /etc/sane.d/saned.conf
> 127.0.0.1
> 10.0.2.1/24
>

thanks!

ok, using root the scanner is found.

You've configured scanbd to run as scaned:lp and it looks like there is 
a privilege problem. Try using scanimage as this uid:gid and/or try 
using scanbd as root:root.

Which distro are you using?

-- 
Wilhelm